D-Link DIR-890L Quick Install Manual

DIR-890L AC3200 Ultra Wi-Fi Router Power Adapter Ethernet Cable Wi-Fi Configuration Card Quick Install Guide Network Requirements: Web-based Configuration Requirements Supported Browsers: • Internet Explorer® 8 or higher, Safari® 5.1 or higher*, Firefox® or Chrome™ mydlink Requirements • For mydlink and mydlink app requirements refer to: http://www.mydlink.com Package Contents Minimum Requirements • An Ethernet-based broadband modem Computer with the following: • Windows® or Mac OS® X operating system • An installed Ethernet adapter or wireless adapter Make sure you have the latest version of Java installed. Visit www.java.com to download the latest version. *Note: We recommend Internet Explorer® 11 and Safari® 7 for best performance.

A solid white light indicates a USB 3.0 device is connected. 2 USB LED A solid white light indicates a USB 2.0 device is connected. 3 5G LED A solid white light indicates the 5GHz wireless function is working properly. During the WPS process, this light will blink quickly. 4 2.4G LED A solid white light indicates the 2.4GHz wireless function is working properly. During the WPS process, this light will blink quickly. 5 Internet LED A solid white light indicates a connection to the Internet port. If the LED is orange, the connection is good but the router cannot connect to the Internet. 6 Power LED A solid white light indicates a proper connection to the power supply. The light will be solid orange during boot-up. 7 USB 3.0 Port Connect a USB flash drive to share content throughout your network. Port supports USB 3.0 and USB 2.0 devices. 8 USB 2.0 Port Connect a USB flash drive to share content throughout your network. Port supports USB 2.0 devices. 9 Reset Button Press and hold the reset button with a paper clip for ten seconds to reset the router to the factory default settings. 10 WPS Button Press to start the WPS process. The 2.4G or 5G LED will blink fast. 11 LAN Ports (1-4) Connect Ethernet devices such as computers, switches, and game consoles. 12 Internet Port Connect a broadband modem to this port using an Ethernet cable. 13 Power Button Press to power the router on and off. 14 Power Port Connect the supplied power adapter. 12 8 13 14 11 9 10 7 1 6 5 4 3 2

your PPPoE user name and password. If you do not have this information, contact your Internet provider. Do not proceed until you have this information. • Users with Cable providers - Make sure you unplug the power to your modem. In some cases, you may need to turn it off for up to 5 minutes. • Advanced Users - If your ISP provided you with a modem/router combo, you will need to set it to “bridge” mode so the DIR-890L router can work properly. Please contact your ISP or refer to the user manual for your modem/router device. Before you Start 1 Unplug the power to your DSL or Cable modem. 2 Connect an Ethernet cable from the Internet port of the router to the Ethernet port on your DSL or Cable modem. Modem Connect your Router 1 2 3 4 USB 2.0 USB 3.0 POWER WSP DCN IN 12V SA ...- RESET INTERNET Ethernet Port Modem Ethernet Cable DIR-890L Internet Port (yellow)

computer to one of the LAN ports on the router. 4 Plug the power back into your DSL or cable modem. Please wait about one minute before continuing. 1 2 3 4 USB 2.0 USB 3.0 POWER WSP DCN IN 12V SA ...- RESET INTERNET 1 2 3 4 USB 2.0 USB 3.0 POWER WSP DCN IN 12V SA ...- RESET INTERNET Computer Computer Modem Ethernet Cable DIR-890L DIR-890L

power outlet or surge protector. If the Power LED does not light up, press the Power button on the back of the router. 6 After the router has powered up, verify that the Power (white) and Internet (white or orange) LEDs are both lit. Proceed with router configuration. Open a web browser (e.g., Internet Explorer, Chrome, Firefox, or Safari) and enter http://dlinkrouter.local./ or the IP address of the router (http://192.168.0.1). 1 1 2 3 4 USB 2.0 USB 3.0 POWER WSP DCN IN 12V SA ...- RESET INTERNET Modem DIR-890L Configuration There are two ways to configure your router: A. Web Browser - Use a web browser from your computer. B. QRS Mobile app - Use a mobile device with the D-Link QRS Mobile app. Refer to the QRS Mobile Setup section for more information. A. Web Browser Configuration

2 The router will automatically detect your Internet connection type. If not, then select your Internet connection and click Next to continue. 3 DSL (PPPoE) users enter your PPPoE user name and password supplied by your ISP. Click Next to continue. 4

connection possible. In order to maximize performance, orient the antennas at an angle, pointing outward and away from the base unit. Create a name for your Wi-Fi Network and a password. Your wireless devices (i.e., tablets, smartphones, and laptops) will need to have this information entered to be able to connect to your wireless network. Click Next to continue. Continue with the Setup Wizard to finish configuring your DIR-890L router. Once completed, the Internet LED will turn white indicating that your router is connected to the Internet. Note: Setting up “mydlink” is optional and not required for the router to function. Congratulations! You have completed the router installation. Antenna Orientation 45°

download the QRS Mobile App to your iPhone, iPad, or Android device. Once your app is installed, you may now configure your router. Connect to the router wirelessly by going to your wireless utility on your device. Scan for the wireless network name as listed on the supplied Wi-Fi Configuration card/sticker. Select the network and then enter the Wi-Fi Password. 2 Once connected, click on the QRS Mobile icon from your mobile device, then click Start to continue. Please follow the on-screen instructions to complete the setup. 3 B. QRS Mobile Setup Once the Setup Complete screen appears, click Save and write down the new Wi-Fi Network name and password on your companion card for future reference. Note: To reconnect to your router, launch your wireless utility, select the new Wi-Fi Network you created, and then enter your new Wi-Fi password. iOS Android QRS Mobile App 85 D-Link Wi-Fi Confguration Card Default Confguration Username: ”Admin” Password: ” ”(leave the feld blank) DCCAROWIFI0020 85 Informations pour la confguration Wi-Fi de D-Link Confguration par défaut Nom d’utilisateur: ”Admin” Mot de passe : (laissez le champ vide) DCCAROWIFI0020 Wi-Fi Name(SSID) Wi-Fi Password: Your confguration Username: ”Admin” Password: Nom Wi-Fi (SSID) Mot de passe Wi-Fi: Votre confguration Nom d’utilisateur ”Admin” Mot de passe:

1. Open your wireless network utility that displays available wireless networks. 2. Select the Wi-Fi Network name you assigned in the wizard and connect. Note: If you did not run the setup wizard or you reset the router to its default settings, refer to the Wi-Fi Configuration Card included for the default Wi-Fi Network Name and Wi-Fi Password. You can also connect wireless devices to the DIR-890L router using WPS: 1. Press the WPS button on the DIR-890L for three seconds. 2. Within one minute press the WPS button on your wireless device. 3. Allow up to two minutes to connect. Note: Some devices may require you to log in to a utility to start the WPS process. Refer to the user manual of the device you want to connect to the router if you do not know how to start the WPS process. How do I change the wireless settings on the DIR-890L router? 1. Open a web browser (e.g., Internet Explorer, Chrome, Firefox, or Safari) and enter http://dlinkrouter.local./ You can also enter the IP address of the router (http://192.168.0.1). 2. At the login screen, enter the router password you created in the wizard (no password by default). 3. Go to Setup > Wireless Settings > Manual Wireless Network Setup to create a new Wi-Fi network name (SSID) and Wi-Fi password. *Documentation available at http://www.dlink.com/DIR-890L. Troubleshooting

This D-Link product includes software code developed by third parties, including software code subject to the GNU General Public License (“GPL”) or GNU Lesser General Public License (“LGPL”). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL code and LGPL code used in this product, are available to you at: http://tsd.dlink.com.tw/GPL.asp The GPL code and LGPL code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more authors. For details, see the GPL code and the LGPL code for this product and the terms of the GPL and LGPL. Written Offer for GPL and LGPL Source Code Where such specific license terms entitle you to the source code of such software, D-Link will provide upon written request via email and/or traditional paper mail the applicable GPL and LGPLsource code files via CD-ROM for a nominal cost to cover shipping and media charges as allowed under the GPL and LGPL. Please direct all inquiries to: Email: [email protected] Snail Mail: Attn: GPLSOURCE REQUEST D-Link Systems, Inc. 17595 Mt. Herrmann Street Fountain Valley, CA 92708 GNU GENERAL PUBLIC LICENSE Version 3, 29 June 2007 Copyright (C) 2007 Free Software Foundation, Inc. View the full GPL Code Statement at http://www.gnu.org/licenses/gpl.html

Corporation or its subsidiaries in the United States and other countries. iPhone, iPad, and iPod touch are registered trademarks of Apple Inc. Android is a trademark of Google, Inc. Other trademarks are the property of their respective owners. Maximum wireless signal rate derived from IEEE Standard 802.11ac, 802.11g, and 802.11n specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental factors will adversely affect wireless signal range. Product specifications, size and shape are subject to change without notice, and actual product appearance may differ from that depicted on the packaging. Visit www.dlink.com for more details. Having trouble installing your new product? D-Link’s website contains the latest user documentation and software updates for D-Link products. U.S. and Canadian customers can contact D-Link Technical Support through our website. United States Internet: http://support.dlink.com Canada Internet: http://support.dlink.ca Technical Support Version 1.0(US)_128x188 November 20, 2014 6DIR890LQ.01G