Datalogic DS6300 Reference Manual

4 2 0 6 (in) 0 6 12 (in) 8 10 14 16 0 150 200 250 300 350 400 450 500 (mm) 250 200 150 100 0 (mm) 50 -50 -100 -150 -200 -250 8 10 -8 -10 -6 -4 -2 550 600 20 18 22 24 Focus Position = 40 Focus Position = 0 Note: (0,0) is the center of the laser beam output window. ...

independently from each other. As a result of the Step-a-Head™, the DS6300 can always be installed in the ideal position. It is possible to change the orientation of the connector panel while the laser window remains in the desired position. ACR3™ Each version of the base has the powerful code reconstruction technology (ACR3). The new third generation ACR considerably increases the code reconstruction reading capability in the case of damaged or very tilted barcodes. PACKTR ...

A SUPPLEMENTARY DOCUMENTATION..................................................................48 GLOSSARY............. ...

2.2 ELECTRICAL CONNECTIONS The following table lists all the connectors available for each scanner model: Scanner Model Connector Master/Slave 25-pin serial interface and I/O connector 9-pin male Lonworks connector 9-pin female Lonworks connector Ethernet 26-pin serial interface and I/O connector 9-pin male Lonworks co ...

angle of +20° for the top line (see figure below) +17.5° +37.5° +27.5° Figure 10 - Oscillating Mode Refer to par. 2.1.1 for details about oscillating mirror mounting. 1.6 ACCESSORIES The following accessories are available on request for DS6300: Order no. Accessory Description 93A051190 CAB-6001 cable to C-BOX100 1 m 93A051200 CAB-6002 cable to C-BOX100 2 m 93A051210 CAB-6005 cable to C-BOX100 5 m 93A051221 CAB-6011 cable to C-BOX100 1 m (DS6300 Fieldbus version) 93A051222 CAB-6012 cab ...

NOTE The reader display shows the focus position only when the laser beam is activated. It is possible to visualize the focus position and the reading percentage on the terminal tool provided by the Genius™ configuration program (see Genius™ Help On-Line for details). ...