Ebode TAKE 6 IR Operation & User’s Manual

6 in 1 universal remote control User guide 3 Bedienungsanleitung 13 Gebruiksaanwijzing 24 Användermanual 34 Guide utilisateur 44 Guía del usuario 56 Manual do utilizador 66 Manuale per l’utente 77

TAKE 6 UNIVERSAL REMOTE 6 in1 Button layout

User Guide General Security Note Attention: For carefree and safe use of this product, please read this manual and safety information carefully and follow the instructions. Technical manipulation of the product or any changes to the product are forbidden, due to security and approval issues. Please take care to set up the device correctly - consult your user guide. Children should use the device only under adult supervision. Important: the TAKE 6 must be used according the instructions in this manual and is not suitable for other purposes. Avoid the following • strong mechanical wear and tear • high temperature • strong vibrations • high humidity Please also respect the additional security notes in the various user guide chapters. To ensure correct set up please read the manual and security notes carefully. Battery install and change The device may only be used with 2x AAA Alkaline batteries - never try to connect to another power supply. When inserting batteries be sure the right polarity is used. Remove the batteries when the device is not used for a longer period. Make sure that the batteries are not short circuited and are not disposed in fire (danger of explosion). Batteries do not belong in children hands. Don’t let batteries lay around openly – they might be swallowed by children or animals. If this happens see a doctor immediately. Disposal of batteries: Batteries are special waste and do not belong in general household waste disposal. Leaking or damaged batteries can upon contact with skin cause burning or acid damage – if necessary use suitable gloves. Please dispose of batteries in accordance with local bylaws. Contents Quick Start Guide 1. Introduction 2. Insert the batteries 3. Function of the remote’s buttons 4. Programming 4.1. Manual code entry 4.2. Automatic code search for some well-known brands 4.3. Automatic code search for all brands 4.4. Manual code search 4.5. Learning codes 4.6 Identifying codes found 4.7. Volume Control Punch Through 4.8. X10 Home Automation Control via IR7243RF 5. Troubleshooting 6. Tips & Tricks about learning IR codes to a remote

Quick start guide 1) Put the batteries in 1. Open the cover on the back of the 6 in 1 Universal Remote Control 2. Insert the two AAA batteries. Make sure the batteries are NEW. 2) Program your 6 in 1 Universal Remote Control 1. Turn on the equipment that you wish to control ( TV, DVR, DVD, STB, AUX, AUDIO). 2. The AUX key allows you to program and control any equipment such as TV, DVR, DVD, CD, STB. 3. Take the code book supplied with the 6 in 1 Universal Remote Control and find the brand of the equipment you wish to control. E.g. if you have a Thomson TV look for Thomson under the TV section. 4. Press and hold on the key marked "S" (8) until the LED (2) stays permanently on. This takes about 3 seconds. Release the "S key". 5. Press and release the TV, DVR, DVD, STB, AUX, AUDIO, mode key (4), in accordance with the appliance you wish to control. 6. From the code book take the first number corresponding to your equipment and enter the number by pressing the 0-9 key pad (14). Each time you press a key the LED (2) will flash. 7. If the number is correctly entered the LED will turn off. If the number is incorrect then the red LED will flash fast. If incorrect you will need to restart at 4. Press the POWER key (1) . If your equipment switches off you have found the right code. If it does not switch off, you will need to restart from 4. Sometimes there are several codes that have similar features. If you find that your 6 in 1 Universal Remote Control does not work for some functions, you may need to try another code. 1. Introduction The TAKE 6 is designed to control up to 6 devices: TV, DVR, DVD, STB, AUDIO or any other device under AUX mode key. The TAKE 6 contains a library of codes that are preprogrammed into the remote control. This library covers nearly all the audio video products on the market today. The codes have to be programmed once before use. This can be done in different ways:

a. Manual entry of one of the codes displayed under the related brand and type of equipment in the attached code book (see 4.1) b. Automatic code search for some well-known brands (4.2) c. Automatic code search for all brands (4.3) d. Manual search through all codes (4.4) 2. Insert the batteries (always use NEW AAA batteries) 1. Open the cover on the back of the TAKE 6 Remote. 2. Insert 2 AAA batteries, verify that they are placed correctly with the + on the battery in the same position as marked inside the battery compartment. 3. Close the battery compartment carefully. 3. Function of the remote’s buttons [1] POWER (On/Off) Allows you to switch off the last selected appliance. Some appliances can also be switched on with this button. [2] LED indicator The indicator light flashes when the remote is operating or lights continuously while you are programming the remote. [3] MUTE Allows you to turn on/off the sound. You can control the "Mute" function of your TV even when you are in DVR, DVD or STB mode. No need to select the TV mode. [4] TV, DVR, DVD, STB, AUX, AUDIO These keys allow you to select the appliance you wish to control. [5] VOLUME +/- Allows you to control the volume. You can control the volume of your TV even when you are in DVR, DVD or STB mode. No need to select the TV mode. [6] CHAN +/- or PROG +/- Select the next or the previous channel of your TV or STB. In DVD mode: next or previous chapter. [7] OK Confirms menu selection. [8] Set Up (S) Allows you to program your remote before the first use. It also allows you to access to secondary functions of certain A/V appliances (Shift). Press the S key followed by the function key you desire. [9] Navigation Keys These buttons allow you to navigate into the menu of the selected device (if the device you selected has such a menu) [10] Guide