Brother DCP-L2500D Quick Setup Manual

Read the Product Safety Guide first, then read this Quick Setup Guide for the correct installation procedure. NOTE: • The components included in the box and the AC power plug may differ depending on your country. • The illustrations in this Quick Setup Guide are based on the MFC‑L2700DW. • You must purchase the correct interface cable for the interface you want to use. USB cable We recommend using a USB 2.0 cable (Type A/B) that is no more than 2 metres long. Network cable Use a straight-through Category 5 (or greater) twisted-pair cable for 10BASE‑T or 100BASE‑TX Fast Ethernet Network. Remove the packing materials and install the toner cartridge Load paper in the paper tray Connect the machine to your computer/mobile device Connect the power cord and turn on the machine Select your language (If needed) (Only for certain models) A Drum Unit (Pre‑installed) AC Power Cord (only for certain models) Quick Setup Guide CD‑ROM B (For U.K.) (For Others) Inbox Toner Cartridge Telephone Line Cord (For MFC models) Product Safety Guide Basic User's Guide (only for certain models) 1. (DCP model) a. Press Menu. b. Press ▲ or ▼ to display General Setup, and then press OK. c. Press ▲ or ▼ to display Local Language, and then press OK. (MFC model) Press Menu, 0, 0. 2. Press ▲ or ▼ to select your language, and then press OK. 3. Press Stop/Exit. A B B A A B 3 5 2 6 1 • Windows® PC with a CD-ROM drive, go to step 6A • Windows® PC without a CD-ROM drive, go to step 6B • Macintosh, go to step 6B • Mobile device users with a WPS/AOSS™-supported access point/router, go to step 6C Back Front Select your country/language (Initial setup only) After turning on the machine, you may be required to set your country or language (depending on your machine). If required, follow the on-screen instructions. 4 Remove the orange part. Remove the orange part. Adjust the paper guides. Quick Setup Guide DCP‑L2500D / DCP‑L2520D / DCP‑L2520DW / DCP‑L2540DN / DCP‑L2540DW / DCP‑L2541DW / MFC‑L2700D / MFC‑L2700DW / MFC‑L2701D / MFC‑L2701DW / MFC‑L2703DW Not all models are available in all countries. The latest manuals are available at the Brother Solutions Center: solutions.brother.com/manuals. Watch our FAQ Videos for help with setting up your Brother machine: solutions.brother.com/videos. Version A UK

Follow the on-screen instructions to continue installation until either the Connect the machine or the Connection Type screen appears. Finish 6A Download the full driver and software package from the Brother Solutions Center. (For Windows®) solutions.brother.com/windows (For Macintosh) solutions.brother.com/mac After you download the driver and software package, follow the on-screen instructions until the Connection Type screen appears. Refer to 6A Configuration using the CD-ROM (Windows®). If your wireless LAN access point/router supports automatic wireless (one-push) setup (WPS/AOSS™), you can set up your machine without using a computer. Connection Type Print and scan using your mobile device For USB Connection For Wired Network Connection Connect a network cable first. For Wireless Network Connection We recommend preparing a USB cable to use temporarily during the wireless setup. Follow the on-screen instructions to continue installation. NOTE: If connection is unsuccessful, repeat this step. One-push wireless setup for mobile devices (Wireless models only) Wireless Network Connection [Recommended] Select this option if you have a USB cable to use temporarily for wireless setup. Select this option if you do not have a USB cable. Follow the on-screen instructions to continue installation. NOTE: If connection is unsuccessful, repeat this step. Configuration without using the CD-ROM (Windows® without CD-ROM drive or Macintosh) 6C 6B Finish Press the WPS or AOSS™ button on your wireless LAN access point/router. Press the WiFi button on your machine. Download “Brother iPrint&Scan” to start using your machine with mobile devices.  solutions.brother.com/ips Wireless setup is now complete. NOTE: Before you can use your machine with your mobile device, download “Brother iPrint&Scan.” NOTE: If the Brother screen does not appear automatically, go to Computer (My Computer). (For Windows® 8: click the (File Explorer) icon on the taskbar, and then go to Computer.) Double-click the CD-ROM icon, and then double‑click start.exe. Finish „ „ Connect the machine: Follow the on-screen instructions to continue installation. „ „ Connection Type: