CME UF5 Operation & User’s Manual

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Warning: Improper connection may cause damage to the device. Copyright: Copyright of the manual belongs to Central Music Co. Anyone must get a written permission from Central Music Co. before copying any part of the manual to any kind of media. (c) Central Music Co. 2004 Open the package Please check all the items in your UF keyboard package: USB MIDI Master keyboard 1 pcs AC adapter 1 pcs USB cable 1 pcs User's manual 1 pcs CD-ROM for device driver 1pcs Sustain pedal 1 pcs (included with UF8 ONLY, optional for UF5/6/7) Thank you for choosing CME UF Professional Master MIDI Keyboard with Built-in USB Please keep all the important information here Attach your invoice or receipt here for reference Purchase date Serial(on the back of the keyboard) Dealer's name and addr. Dealer's tel.

2 PRECAUTIONS IMPORTANT Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, damages, fire or other hazards. These precautions include, but are not limited to, the follows: 1. Read and understand all the instructions. 2. Always follow the instructions on the instrument. 3.Before cleaning the instrument, always remove the electric plug from the outlet as well as the USB cable. When cleaning, use a soft, dry cloth. Do not use gasoline, alcohol, acetone, turps or any other organic solution; do not use liquid cleaner or spray cleaner, or too wet cloth. 4. Do not use the instrument near water or moisture, such as bathtub, washbasin, or washing poor in the kitchen, or similar places. 5. Do not place the instrument in an unstable position where it might acci- dentally fall over. 6. Do not jam sinks or holes of the instrument; those sinks of holes are used for air circulation to prevent the instrument from overheating. Do not place the instrument near heat sink or any places with poor air circulation. 7. Always use the AC adaptor included with the instrument; do not use any other AC adaptor. 8. Do not place anything on the power cord. Make sure the power cord is set on a safe place, so nobody will step on it and no body will get trip over by it. 9. Do not overload the outlet and AC cable to avoid fire or electrical shock. 10. Do not insert anything in the instrument, which may cause fire or elec- trical shock. Do not splash any kind of liquid to the instrument. 11. Do not disassemble the instrument in case of accidental electrical shock. 12. Always take the instrument to qualified service center in need of repair. You will cause yourself in danger if you open or remove the cover, and im- proper assembly may cause electrical shock in the future use. 13. Unplug all the connectors and take the instrument to qualified service center if anything in the below list happens: A. The power cord or connector get hurt or worn out. B. Any liquid get in the instrument. C. The instrument gets rain or water splash. D. The instrument dose not work properly after following all the in- structions regarding to troubleshooting. E. The instrument falls down or gets broken. F. The instrument functions poorly. 14. Do not use the instrument when thundering; otherwise the thundering may cause long-distance electrical shock. 15. Do not use the instrument when there is gas leak nearby.

Keep this manual in safe place CAUTION: Setting up Do not connect the instrument when thundering. Do not set up the cord or outlet to moisture place, except for that the outlet is specially designed for moisture. When the power cord is connected to the AC outlet, do not touch the naked part of cord or connector. Always follow the instructions carefully when setting up the instrument. WARING: Do not expose the instrument to rain or moisture, to avoid fire or electrical shock. Other precautions: Keep the instrument away from electrical interface source, such as fluores- cent light and electrical motor. Keep the instrument away from dust, hear and vibration. Do not expose the instrument to sun light. Do not place heavy object on the instrument; do not place containers with liquid on the instrument. Do not touch connectors with wet hand Central Music Co. is not responsible for any damage or data loss caused by improper operation to the instrument. All the pictures and LCD display in the manual are used for demonstration; they may be different from a real instrument. Features Professional Master MIDI Keyboard with Built-in USB 49/61/76 keys with Initial Touch/Aftertouch(UF5/6/7) 88keys Hammer Effect with Initial Touch/Aftertouch(UF8) Pitch wheel and Modulation wheel 8 assignable knobs, preset function includes Cutoff / Resonance / Attack / Release / Pan / Reverb / Chorus / Tempo 9 assignable faders(sliders), preset function includes channel volume(chn1- chn16) and Master volume, Drawbar organ LED display 9 control buttons for Program change, Transpose, Octave, Channel, Split, Dual and others. 6 Sequencer remote control buttons: REC, PLAY, STOP, FF, REW, BACK- WARD BC(Breath Controller) port 1 MIDI out port Sustain pedal and Volume pedal connector USB MIDI port, power can be supplied with USB USB Drivers for Win2000/XP and Mac OSX USB MIDI Compatible with major sequencer and audio software Optional Firewire expansion board for IEEE 1394 audio interface

4 1.Connection ............................................................ 5 1.1 Front panel ................................................................................. 5 1.2 Rear panel ................................................................................. 6 1.3 Connect UF to tone generators ................................................. 7 1.4 Add UF to computer music system ........................................... 8 1.5 Driver installation ....................................................................... 9 2.Play the instrument ............................................... 9 2.1 Turn on the instrument .............................................................. 9 2.2 Play the demo song ................................................................... 9 2.3 Reset.......................................................................................... 9 2.4 Value adjustment and display ................................................. 10 2.5 Select voice .............................................................................. 10 2.6 Pitch bend wheel ..................................................................... 10 2.7 Modulation wheel ..................................................................... 10 2.8 Adjust volume and customize faders ..................................... 10 2.9 Transpose................................................................................ 11 2.10 Octave shift............................................................................. 11 2.11 All notes off ............................................................................. 13 3.Advanced functions ............................................. 13 3.1 Change MIDI channel .............................................................. 13 3.2 Edit voice and customize knobs .............................................. 13 3.3 Send initializing sysx................................................................ 14 3.4 Adjust velocity curve ................................................................. 15 3.5 Split .......................................................................................... 15 3.6 Dual .......................................................................................... 16 3.7 After touch ................................................................................. 17 3.8 Drawbar organ ......................................................................... 17 4.Computer music system connection .................. 17 4.1 Sequencer remote control ....................................................... 17 4.2 Select MIDI route ...................................................................... 18 5.Appendix ............................................................. 18 5.1 Controller parameters list........................................................ 18 5.2 Troubleshooting....................................................................... 20 5.3 Specifications .......................................................................... 21 5.4 MIDI implementation chart....................................................... 22 5.5 Index ......................................................................................... 23 Contents Contents

1.Connection 1.1 Front Panel Sequencer remote control Those buttons are used to control external sequencer. Voice editing knobs 8 assignable knobs with preset for voice editing. Volume Faders 8 assignable faders (sliders) with preset for channel volume. Master Volume Master volume fader for external tone generator (GM standard.) Knob Func This button is used to switch knob function. Fader Func This button is used to switch fader function. LED display The LED displays related information of the keyboard. Function buttons Those buttons are used to make a lot of functions of the keyboard. Data dial Data dial is used to adjust current value. Inc/Dec Button Increase or decrease current value by one when pushed. Connection