Breo iDream1168 Operation & User’s Manual

5678 East Concours Avenue Ontario, California 91764 http://www.breo-usa.com [email protected]

BREO iDream1168. Please read this manual carefully before using the product, and keep it in a safe place for future reference.

Function Deployment Operation Precautions Troubleshooting 3 3 4 6 Preparation 5 7 -- 8 9 Contents 2 Technical Parameters 9

Introduction iDream1168 adopts air pressure, vibration, and hot compress massaging technology. It relaxes the ocular region by rubbing and vibration massag- ing the pressure points around it. This product allows you to enjoy wonder- ful music while massaging, further relaxing your brain. Main Unit，Controller，AC Adapter，Batteries，User Manual，Earphones. Controller Main Unit f AC Adapter Batteries（AA x 4pcs） User Manual Earphones 1168

2. Size Adjusting Knob 3. Hindbrain massage heads 4. Front part of Main unit On/Off, Mode Button LCD Screen (Clockwise: Music / Vibration / Heat / Air pressure / Time) Operating Buttons A . B . C . (Clockwise: Music / Vibration / Heat / Air pressure / Time; Center button: Mode, ON/OFF) Earphone Jack D . DC Power Port Pressure Reduction Valve E . F. D E B A C F 1 2 3 4

Battery power is sufficient No damage on AC adapter b. a. 1 . Batteries c. Prior to use, check the integrity of the machine and accessories: Power Options a. Open the battery cover on the back of the controller. b. Install 4 AA batteries in accordance with the positive and negative poles. c. Close the battery cover. (picture1) Wear Use the side dials to adjust the distance between head to estab- lish the most comfortable fit, and wear main unit. (picture3a) For ease and safety, use BOTH hands in adjusting the tightness on each side as well as in setting the distance above head. (picture3b) a. Insert the plug of AC adapter in the controller’s DC port. b. Connect the other end to AC power socket. (picture2) 2 . AC Adapter （picture1） （picture2） （picture3a） （picture3b） * Choose power option #1 OR #2.

Pressure Reduction Valve on the controller to release air. Preset default is air pressure + high-temperature hot compress + vibration + relaxing music, 15 minutes duration. Manually operate related function buttons to switch among music, time, vibration, hot compress, and air pressure modes. (*Sounds of Nature featured: running water, birds chirping, waves, crickets, water dripping) Power on - Press and hold Button Time: Press Button to select massage duration (5 min / 10 min / 15 min) Music: Press Button to select music type (Relaxing / Nature) Press and hold Button to STOP the music Vibration: Press Button to initiate 4 vibration modes (circulates automatically) Heat: Press Button to select temperature (Low-High) Air pressure: Press Button to initiate 4 air pressure modes (circulates automatically) Mode: Press to select from 4 different modes: Air pressure + Hot compress Air pressure + Vibration Hot compress + Vibration Air pressure + Hot compress + Vibration Power off - Press and hold Button again.

Children under 7 years old cannot use the massager. This massager should not be used by people who suffer from a brain disease, have had brain surgery, or have a physical or mental disorder. Put on/wear the unit first BEFORE turning the power on. Do not use while walking or driving. Keep the massager away from humidity, heat, and/or corrosive gas. If the massager will not be used for a long time, remove the batteries to avoid battery leakage. This massager is designed as a personal care product. It is not for diagnosis/treatment of any health disorder, nor meant for commercial use. To clean, wipe with aseptic cotton and alcohol. Do not wash or immerse in water. This product is not a substitute for healthcare professionals' advice and treatment. In case of doubt or if necessary, please consult your healthcare professional. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. Please note that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 12. 11.

– Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio ommunications. However, there is no guarantee that interference will not occur in a will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on,the user is encouraged to try to correct the interference by one or more of the following measures: 13.

Do not disassemble the machine or try to repair it by yourself. Technical Parameters Power supply： Ideal environment： Dimension ： Net Weight： Power： DC: 6V Temperature: 5°C - 40°C Relative humidity: ：≤80% Atmospheric Pressure: 5-400hpa Main Unit: 233mm X 269mm X 245mm Controller: 158mm X 68mm X 43mm 882g 6W Problem
Possible Reason
Possible Solution
Power-ON failure Cable is broken / in bad condition Check the condition of the cable Batteries are low / out Change batteries Batteries are not installed correctly Check if positive/negative poles of batteries are positioned right Make sure the batteries are snug in place . AC adapter is not connected properly Check the connection of the AC adapter to the power socket . Weak heat or air pressure Batteries are low / out Change batteries Make sure the batteries are installed correctly and snug in place 9