Breo iSee360 Operation & User’s Manual

5678 East Concours Avenue Ontario, California 91764 http://www.breo-usa.com [email protected]

BREO iSee360. Please read this manual carefully before using the product, and keep it in a safe place for future reference.

Function Deployment Operation Precautions Troubleshooting & Technical Parameters 3 3 4 6 Preparation 5 7 -- 8 9 Contents 2

The package includes: Main Unit, Controller, AC Adapter, Batteries, User Manual, and Earphones. Introduction iSee360 adopts air pressure and hot compress massaging technology. It rubs, presses, hot compresses, and massages the ocular region in order to relax it. You can enjoy the soothing music while massaging to completely relax your brain. ON/Time/off ISEE360 Main Unit Fabric-cover Controller Air bag Elastic band Earphones User Manual Batteries AC Adapter 6

Function Deployment 4 ON/Time/off A B C E D iSee360 [A] On/Time/Off [B] LED Screen (From top to bottom: Time / Air pressure, Heat, Vibration / Music) [C] Operating Buttons Clockwise: Heat / Vibration / Music / Air pressure Center Button: Mode selection [D] Earphone Jack [E] DC Power Port

Power Options Wear a.  No damage on connection between controller and main unit. b.  Battery power is sufficient. c.  No damage on AC adapter. 1. Batteries    a. Open the battery cover on the back of the controller.    b. Install 4 AA batteries in accordance with the positive and negative poles.    c. Close the battery cover. 2. AC Adapter    a. Insert the plug of AC adapter in the controller’s DC port.    b. Connect the other end to AC power socket.    c. Insert the earphones’ cylindrical plug into the controller’s earphone jack. * Choose power option #1 OR #2. DC Power Port Front view Side view Earphone Jack 2. 1. This massager is to be used for the eyes only.  For ease and safety, adjust buckles until a comfortable fit is achieved.

water,  birds  chirping,  waves,  crickets, dripping water) Press and hold – STOP the music. Vibration Press to initiate vibration modes: circular motion / strong / medium / weak / light / comfort / strong thump / medium thump  /  fast  thump  /  vibration  left  and right alternatingly / fast vibration left and right alternatingly. Heat Press to select temperature. (Low­High) Air pressure Press  to  select  mode.  (Mode  1/Mode 2/Mode3/Mode 4/Loop)

Children under 7 years old cannot use the massager. This massager should not be used by people who suffer from brain disease, eye disease, or another physical or mental disorder. Take off contact lenses / eye glasses before use. Put on / wear the unit first BEFORE turning the power on. Do not use while walking or driving. Keep your eyes closed for a few seconds after use, then open them slowly. Keep the massager away from humidity, heat, and/or corrosive gas. If the massager will not be used for a long time, remove the batteries to avoid battery leakage. This massager is designed as a personal care product. It is not for diagnosis/treatment of any health disorder, nor meant for commercial use. To clean, wipe with aseptic cotton and alcohol. Do not wash or immerse in water. This product is not a substitute for healthcare professionals’ advice and treatment. In case of doubt or if necessary, please consult your healthcare professional. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12.

– Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio ommunications. However, there is no guarantee that interference will not occur in a will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on,the user is encouraged to try to correct the interference by one or more of the following measures: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 15. 14. Please note that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Do not disassemble the machine or try to repair it by yourself. Problem Possible Reason Possible Solution Power-ON failure Cable is broken / in bad condition Check the condition of the cable Batteries are low / out Change batteries Batteries are not installed correctly Check if positive/negative poles of batteries are positioned right Make sure the batteries are snug in place . AC adapter is not connected properly Check the connection of the AC adapter to the power socket . Weak heat or air pressure Batteries are low / out Change batteries Make sure the batteries are installed correctly and snug in place 9 Temperature: 5°C­40°C Relative Humidity：≤80% Atmospheric pressure: 860hpa～1060hpa 485g 6W 30°C­45°C DC: 6V Main Unit：230mm × 105mm × 100mm Controller：141mm ¼ 68.5mm ¼ 44mm