Blackmagicdesign Blackmagic URSA Installation And Operation Manual

To attach a PL mount lens: Step 1. Open your camera's PL locking ring by rotating it counterclockwise until it stops. Step 2. Align one of the lens' four flange notches with the locating pin on the camera mount. Be sure to align the lens for easy viewing of the lens marks. Step 3. Tighten the PL locking ring by rotating it clockwise. Step 4. To remove the lens, rotate the locking ring counterclockwise until it stops, then gently remove the lens. When no lens is attached to the camera, the glass filter covering the sensor is exposed to dust and other debris so you'll want to k ...

35 Settings Dashboard   35 Camera Settings   35 Audio Settings   37 Recording Settings   38 File Naming Convention   41 Display Settings   41 45 Entering Metadata The Slate   45 46 Camera Video Output HD Monitoring Output   46 12G-SDI Output   46 48 Blackmagic URSA Viewfinder 52 Mounting Batteries Mounting V-mount or Gold Mount Batteries   52 Using your own Battery Plate   52 54 Using DaVinci Resolve Introducing DaVinci Resolve   54 Importing your Clips    54 Editing your Clips    55 Trimming Cl ...

Once you have recorded your video, you can use the transport control buttons to play back your video. Press the 'play' button once for instant playback and you'll see your recorded video on the fold out monitor. Your clips can also be viewed on the touchscreens and any display connected to the SDI outputs. Playback will continually play through all your recorded clips. The controls of your camera work just like a CD player, so pressing the 'forward skip' button will skip to the start of the next clip. Press the 're ...

then tap the relevant arrow icons. Codec The 'codec' setting lets you choose between various CinemaDNG RAW and Apple ProRes codecs such as RAW, RAW 3:1, ProRes 444 XQ, and more. The amount of video you can record on a CFast card will increase when choosing codecs that utilize higher compression. Refer to the 'recording duration table' in the 'recording' section for more information. Resolution This setting works in combination with the 'codec' setting. Select ...

69 URSA Mini Shoulder Mount Assembly Insert screws via threaded hole in slot 2 x ¼” baseplate screws To attach the shoulder mount baseplate: Step 1. Gently place your URSA Mini upside down on a flat, stable surface so you can easily access the base of your camera. Step 2. Fasten the shoulder mount baseplate to URSA Mini using the 2 x ¼” flat head screws and driver. Step 3. Tighten the screws until the baseplate is firmly attached and the screws won’t loosen. Avoid over-tightening as it may damage the screw threads. To attach the shoulder mount kit to you ...

55 To start editing your clips, you’ll need to create a new timeline. The timeline is the stage upon which all your editing will take place. The ‘edit’ page. You can trim your clips, change their order, move them around and add transitions between them using the timeline editor. If your clip folder doesn’t appear in the library, you’ll need to add it. This is easily done by clicking on preferences in the DaVinci Resolve title bar and clicking on the ‘plus’ icon in the ‘media storage’ tab, browse to and select a drive or folder path, click 'save', restart ...