Bolt VS-510P Operation & User’s Manual

MODE ZOOM OFF ON OFF S READY/TEST OK 45 60 75 VS-510P 1 2 4 6 9 16 12 11 17 3 5 18 7 8 10 15 14 13 ...

When bouncing your flash, you may need to adjust your exposure settings, since the level of light falling on your subject will be reduced. The farther away the bounce surface and your subject are, the more illumination will be reduced. Tip: Bouncing your flash off of colored surfaces can create a color cast in your images. Bouncing off of a white or neutral-colored surface will not alter the color of the light, while bouncing off of a gold-toned surface can give portraits a warmer look. Other colors, while usually not desirable, can be used for creative effects. Creati ...

Bouncing Your Flash.................................................................................................................................26–29 Using Rear- or Second-Curtain Synchronization .......................................................................................29–30 Using Your VS-510P as a Wireless TTL Slave ............................................................................................31–33 Using Your VS-510P as a Wireless Manual Flash ......................................................................................33–36 Positio ...

Using Your VS-510P as a Wireless TTL Slave The VS-510P is equipped with advanced wireless TTL flash functions, allowing you to fire the flash remotely while still maintaining full TTL control. In addition, it can be set to multiple channels and groups, giving you unlimited creative lighting possibilities. Important terms: Here are the terms you’ll need to be familiar with in order to learn how to work with multiple wireless flash units: Master: This can be the camera’s built-in flash, a flash unit mounted on the camera, or a dedicated wireles ...