Automatic Technology NES-24V1 NeoSlider Installation Insrtuctions

Note: The pedestrian default position is set at fi ve (5) seconds from fully closed position and can be changed as follows: Step 1. Navigating to “set pedestrian menu” 1. Press PREV to navigate to Menu 10 (Fig. 14). 2. Press SET - MENU 10.1 is displayed. 3. Press NEXT to go to MENU 10.3. 4. Press SET to enter Set Pedestrian procedure. Step 2. Setting pedestrian position 1. Press OPEN to change the pedestrian access position time (Fig. 15). 2. Press SET to record new time Step 3. Pedestrian position set The cont ...

Menu Structure Menu 8 Diagnostics Menu 9 Memory tools Menu 10 Setup Travel Menu 1 Code transmitter Menu 2 Current Trips Menu 3 Auto-close times Main Screen Gate status & information Menu 10.1 Limit travel Code/edit transmitter procedure. See page 24-26 Parameter list 1. M1 margin 2. Settle time See page 20 Parameter list 1. STD autoclose 2. PE autoclose 3. Ped’n autoclose 4. PE Ped’n autoclose 5. Autoclose after close obstructions 6. Autoclose after open obstructions 7. Autoclose after power up See page 20 Tra ...

Setting Travel Limits MENU 10.1 Limit Travel PR E S S 10 fi g Installing antenna Mount the antenna at or above the height of the gate or fence (whichever is higher) for optimal reception. Do not cut the coaxial cable. PLEASE NOTE - Before plugging the NeoSlider™ in, check the power cord for damage and ensure it cannot become entangled in any moving parts After powering up the NeoSlider™, the controller will go through a startup sequence displaying the STARTUP SCREEN (Fig. 08). This indicates the controller type ...

25 Returning to main screen The “Code Transmitter” menu will now be shown. Press EXIT to return to the MAIN SCREEN and test the transmitter. NOTE: To edit the other settings, refer to Transmitter editing. Transmitter editing Display transmitter record Using one of the methods below, display the required transmitters details. Step 1. Navigating to “edit transmitter” menu 1. Press NEXT to navigate to the Menu 1 (Fig. 20). 2. Press SET to enter the transmitter edit procedure. 3. Press NEXT to enter transmitter lis ...

Menu Structure Menu 8 Diagnostics Menu 9 Memory tools Menu 10 Setup Travel Menu 1 Code transmitter Menu 2 Current Trips Menu 3 Auto-close times Main Screen Gate status & information Menu 10.1 Limit travel Code/edit transmitter procedure. See page 24-26 Parameter list 1. M1 margin 2. Settle time See page 20 Parameter list 1. STD autoclose 2. PE autoclose 3. Ped’n autoclose 4. PE Ped’n autoclose 5. Autoclose after close obstructions 6. Autoclose after open obstructions 7. Autoclose after power up See page 20 Tra ...

Parts List When ordering spare parts please quote the order code number to your installer/dealer. Item/description order code 1. Base 62400 2. Mounting bracket ext 62502 3. Drive train ASSY V4 61882 4. Transformer TDB-150-08 kit 62025 5. EMC fi lter board EMC-3.02 61447 6. Timing platform CG8C 63229 7. Ext. spring 8.2 x 41 15681 8. Actuating Arm CG8C 15346 9. Chopper clip 64960 10. CAM limit ASSY 61702 11. Quad QMS-1.02 board 61673 12. E circlip D1500 0070 10815 13. Dust cover 63224 14. Worm 2315 64934 15. Sel-lock ...

Step 3. Editing the store location This feature is only available when coding the fi rst button of a new transmitter. 1. Press NEXT or PREV to move cursor over Store No. 2. Press UP or DOWN to select new Store No (Fig. 26). 3. Press SET to confi rm or NEXT/PREV to move to the next fi eld. This is useful when managing transmitters using a scheme which ties the store location to the transmitter’s owner. Step 4. Selection of ID or Serial Number display 1. Press NEXT/PREV to move cursor over ID fi eld. 2. Press N ...

© August 2009 Automatic Technology (Australia) Pty Ltd. All rights reserved. NeoSlider™ and TrioCode™ are the trademarks of Automatic Technology (Australia) Pty Ltd. Tri-Tran™ is a trademark of B&D Doors and openers. No part of this document may be reproduced without prior permission. In an ongoing commitment to product quality we reserve the right to change specifi cation without notice. E&OE. Automatic Technololgy (Australia) Pty Ltd ABN 11 007 125 368 6-8 Fiveways Boulevard Keysborough, Victoria, 3173, Australi ...