Bajaj Juice Extractor Operation & User’s Manual

Know Your bajaj Juice Extractor Dear Customer, Welcome to the world of Bajaj Home Appliances, You are now the proud owner of a Bajaj Juice Extractor. This compact, user friendly home appliance will help you to extract the juices from your favourite fruits and vegetables. This juice Extractor is a great time saver and a convenient gadget. Separate collecting bowls for juice and pulp, interlocking switch which ensures unit does not run till the clamps are locked for total safety, transparent view window on top, on line removable juice and pulp containers, durable stainless steel mesh, capacity marking on juice collecting bowl are some of the salient features of the Bajaj Juice Extractor. This booklet will help you to understand and use your Juice Extractor properly. It gives you ample instructions on its operation. We hope, in addition to the juice extractor, you would like to possess many more Bajaj Appliances in future. TECHNICAL DATA Model : Bajaj Juice Extractor Power Supply : 230 Volts A.C. 50 Hz. Wattage : 250 Watts R.P.M. : 16,000 Rating : 5 Minutes Insulation : Class B Juice container capacity : 600 ml. Body material : ABS Mesh material : Stainless Steel PRECAUTIONS BEFORE USE • Read the instructions carefully before use. • Keep the juice Extractor away from heat and sunlight. • Unplug when not in use. • Chop the fruits/vegetables small enough to feed through the feeder opening. • Never switch on the Juice Extractor unless the top cover is firmly locked in to position. • Do not run the Juice Extractor for more than specified rating at a stretch. • Do not run the unit without load. • Clean the mesh/cutter after each use. • Clean the main motor body unit only with moist cloth, do not immerse the body in water.

• Do not attempt to repair the unit at home or allow any unauthorised person to do so either. • In the event of the unit needing attention, take it to the nearest Bajaj authorised service dealer or branch service center. IDENTIFICATION OF PARTS HOW TO USE THE JUICE EXTRACTOR 01. Place the mesh housing on the main motor body unit. 02. Keep the mesh at its place inside the mesh housing. 03. Place the top cover over the mesh housing onto the juicer body and lock the side clamps. Note that the Juice Extractor will not operate until the side clamps are locked in place. 04. Keep the Pulp container & Juice container at their respective places. To keep the pulp container in place, align the top horizontal edge of the pulp container with the top cover edge, just below the view window on both the sides and push it firmly towards the vertical edge of the top cover. Press the pulp container downwards to lock it firmly in place. 05. Wash and cut the fruit/vegetables to pieces, small enough to feed them through the feeder. 06. Plug in the unit to the power supply, switch on. Push the fruit/vegetable pieces through the feeder with the help of pusher. 07. The juice will be collected in the juice container and the pulp will fall into the pulp container. 08. Remove the juice and the pulp from the respective containers whenever they are full. For removing the pulp container, press the pulp container upwards and just pull it out. 09. At the end of the operation switch off the unit, unplug. 10. Unclamp the top cover and remove. Remove the mesh from the unit; clean it with the help of nylon wire brush under a jet of tap water. 11. Clean the juice/pulp containers with the help of liquid detergent and water. 12. After drying, re-assemble the unit as described above and store it properly for the next use.