Band-it Ultra-Lok UL4000-BUltra-Lok UL4000-B220 Operating Instructions Manual

4799 Dahlia Street Denver, CO 80216-0307 USA P: 1-800-525-0758 F: 1-800-624-3925 Document # P07986 Rev. F © Copyright BAND-IT-IDEX, Inc. 2011 All rights reserved www.BAND-IT-IDEX.com Page 3 of 14 UL4000-B UL4000-B220 Ultra-Lok Tool Setup Instructions Use only with BAND-IT 3/4" and 1/2" Ultra-Lok Free-End and Preformed Clamps Warning: Always wear safety glasses when operating this tool and keep both hands and clothing away from clamp being tensioned. Squeezing force of 3/4" clamp can reach as high as 2 tons. Never attempt to clamp objects whic ...

4799 Dahlia Street Denver, CO 80216-0307 USA P: 1-800-525-0758 F: 1-800-624-3925 Document # P07986 Rev. F © Copyright BAND-IT-IDEX, Inc. 2011 All rights reserved www.BAND-IT-IDEX.com Page 11 of 14 UL4000-B UL4000-B220 Ultra-Lok Tool Clamp Application Preformed Clamps Place clamp in desired position on object to be clamped. Follow steps 5 and 6 on page 9. Inspect buckle on completed clamp and tap down buckle shroud as shown below. When applying clamps on soft, thick-walled hose, tension clamp then wait a full 30 seconds. Clamps may be re-tension ...

4799 Dahlia Street Denver, CO 80216-0307 USA P: 1-800-525-0758 F: 1-800-624-3925 Document # P07986 Rev. F © Copyright BAND-IT-IDEX, Inc. 2011 All rights reserved www.BAND-IT-IDEX.com Page 2 of 14 UL4000-B UL4000-B220 Ultra-Lok Tool Warranty, Safety Guidelines, Contents Warranty Refer to website for warranty information: http://www.band-it-idex.com/warranty.html NOTE: Any performance data published herein is based on laboratory tests, which cannot duplicate conditions that may be encountered in field installations. Such conditions may vary resu ...

4799 Dahlia Street Denver, CO 80216-0307 USA P: 1-800-525-0758 F: 1-800-624-3925 Document # P07986 Rev. F © Copyright BAND-IT-IDEX, Inc. 2011 All rights reserved www.BAND-IT-IDEX.com Page 12 of 14 UL4000-B UL4000-B220 Ultra-Lok Tool Maintenance 1. Approximately every 500 clamps lubricate Tension Screw with molybdenum disulfide lubricant, or equivalent. Make sure Tension Block is all the way forward against the Tool Head. Remove cap from syringe and insert tip of syringe into slot on top of tool body. Press the tip against the Tension Screw jus ...

4799 Dahlia Street Denver, CO 80216-0307 USA P: 1-800-525-0758 F: 1-800-624-3925 Document # P07986 Rev. F © Copyright BAND-IT-IDEX, Inc. 2011 All rights reserved www.BAND-IT-IDEX.com Page 8 of 14 UL4000-B UL4000-B220 Ultra-Lok Tool Assembly Instructions 17 9 5 Component under spring load when assembled 10 7 32 Brush lubricant evenly on threads 2 Places 26 31 8 16 32 31 All around inside profile both sides Tension Gripper Assembly Tool Head Assembly See page 6 for parts list * M09387 (Optional) ½” Shear Plate Insert can be substituted for M09 ...

4799 Dahlia Street Denver, CO 80216-0307 USA P: 1-800-525-0758 F: 1-800-624-3925 Document # P07986 Rev. F © Copyright BAND-IT-IDEX, Inc. 2011 All rights reserved www.BAND-IT-IDEX.com Page 3 of 14 UL4000-B UL4000-B220 Ultra-Lok Tool Setup Instructions Use only with BAND-IT 3/4" and 1/2" Ultra-Lok Free-End and Preformed Clamps Warning: Always wear safety glasses when operating this tool and keep both hands and clothing away from clamp being tensioned. Squeezing force of 3/4" clamp can reach as high as 2 tons. Never attempt to clamp objects whic ...

4799 Dahlia Street Denver, CO 80216-0307 USA P: 1-800-525-0758 F: 1-800-624-3925 Document # P07986 Rev. F © Copyright BAND-IT-IDEX, Inc. 2011 All rights reserved www.BAND-IT-IDEX.com Page 8 of 14 UL4000-B UL4000-B220 Ultra-Lok Tool Assembly Instructions 17 9 5 Component under spring load when assembled 10 7 32 Brush lubricant evenly on threads 2 Places 26 31 8 16 32 31 All around inside profile both sides Tension Gripper Assembly Tool Head Assembly See page 6 for parts list * M09387 (Optional) ½” Shear Plate Insert can be substituted for M09 ...

4799 Dahlia Street Denver, CO 80216-0307 USA P: 1-800-525-0758 F: 1-800-624-3925 Document # P07986 Rev. F © Copyright BAND-IT-IDEX, Inc. 2011 All rights reserved www.BAND-IT-IDEX.com Page 12 of 14 UL4000-B UL4000-B220 Ultra-Lok Tool Maintenance 1. Approximately every 500 clamps lubricate Tension Screw with molybdenum disulfide lubricant, or equivalent. Make sure Tension Block is all the way forward against the Tool Head. Remove cap from syringe and insert tip of syringe into slot on top of tool body. Press the tip against the Tension Screw jus ...