Baumatic BCE7001 Instruction Manual

BCE7001 70 cm Knob control 4 zone ceramic cooktop NOTE: This User Instruction Manual contains important information, including safety & installation points, which will enable you to get the most out of your appliance. Please keep it in a safe place so that it is easily available for future reference; for you or any person not familiar with the operation of the appliance. 1 JW 12/09/13

appliance. For example, should you want to learn more about recommended cooking temperatures, the various cooking functions available, how to set and program your LED clock,  and  importantly  taking  care  of  your  appliance  when  cleaning,  please  call  us because we are here to help you. It is important that you read through the following use and care manual thoroughly to familiarise yourself with the installation and operation requirements of your appliance to ensure optimum performance. We also carry a complete range of spare parts for all of our products. For all your spare parts enquiries please contact our team at Pronto Parts on: 1300 306 973 Again, thank you for choosing an appliance brought to you by Baumatic Australia and we look forward to being of service to you. Kind Regards, Management Baumatic Australia

5 – 7 Specifications 8 – 9 Product and aperture dimensions 8 Product specifications 8 Electrical details 9 Ceramic cooktop surface layout 9 Using the ceramic cooktop 10 - 12 Before first use 10 Touch controls 10 Switching on a cooking zone and setting a power level 10 Residual heat indicator 11 Cooktop guidelines 11-12 Cleaning and maintenance 12 - 13 Cleaning the ceramic cooktop 12 After each use 12 Cleaning table 13 Using a ceramic cooktop scraper 13 Using a specialist ceramic cooktop cleaner 13 Installation 14 - 19 Positioning 14 Unpacking the appliance 14 Installing the appliance 15-16 Electrical connection 17 Connecting the mains supply cable 17-18 Replacing the mains supply cable 19 My appliance isn’t working correctly 20 - 21 Contact details 22

friendly and can be recycled. all packaging material with due regard for the environment. o Please discard

Your safety is of the utmost importance to Baumatic. Please make sure that you read this instruction booklet before attempting to install or use the appliance. If you are unsure of any of the information contained in this booklet, please contact the retailer where you d your unit. usehold use and for the e ambient temperature of the room it is located in, r discolouration at temperatures below the ntion of this temperature limit, will be the liability of the f Guarantee. The foregoing does not of the manufacturer ld not use this appliance to store items on or as a work ns to the appliance are permitted by the be kept away from the orised service or their authorised service agents. purchase General Information This appliance is designed for domestic ho o cooking and frying of domestic foodstuffs. o IMPORTANT: The adjacent furniture and all materials used in the installation must be able to withstand a minimum temperature of 85°C above th whilst in use. o Certain types of vinyl or laminate kitchen furniture are particularly prone to heat damage o guidelines given above. o Any damage caused by the appliance being installed in contrave owner. o Your new appliance is guaranteed against electrical or mechanical defects, subject to certain exclusions that are noted in the manufacturer’s Conditions O affect your statutory rights. o The use of this appliance for any other purpose or in any other environment without the express agreement will invalidate any warranty or liability claim. You shou o surface. No modificatio o manufacturer. o You should not store or place flammable or highly flammable liquids/materials on top of or near the appliance. Items made from aluminium, plastic or plastic film should also appliance, as they may fuse to the surface. ay only be carried out by auth o Repairs m engineers

under close supervision at all nce when Child Safety o The manufacturer strongly recommends that babies and young children are prevented from being near to the appliance and not allowed to touch the appliance all surfaces will become hot. o If it is necessary for younger family members to be in the kitchen, please ensure that they are kept times. Older children should only be allowed to utilise the applia o supervised. General Safety The appliance should only be installed and connected by a suitably qualified person. Care should be taken to ensure that the units and work surfaces that you build the appliance into, meet with the relevant standards. If you notice any scratches, splits or cracks in the ceramic glass, you should immediately switch off the appliance and disconnect it from your mains supply. Otherwise there is the risk of electric shock use of the appliance by a ponsible for their safety. occurring. o This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning person res During use Any film or stickers that are present on the cooktop surface when it is delivered should be removed before use. Care should be taken when utilising the appliance, otherwise there op surface when it is hot or any hot at and oil the appliance should not be is a risk of burns being caused. o You should not allow the electrical connection cables to come into contact with the cookt cookware. o If fat and oil overheats, then it can ignite extremely quickly. For this reason, when cooking with f left unattended. Make sure that all of the cooking zones are switched off after use.

nce, it should be disconnected from the mains and allowed to cool. t using this appliance and when following the cleaning procedure. any other high pressure cleaning equipment to clean the appliance. pecific section of this booklet that refers to installation. as a result of improper use or installation of this appliance. eclaration of conformity ance must be used by a trained person for domestic purposes only. o avoid damaging your appliance ases may ld be lifted on and off the cooktop surface and not out cookware placed on it. Also the cookware should not be empty. C o o IMPORTANT: Before attempting to clean the applia o Great care should be taken whils o You should not use a steam jet or Installation This appliance must be correctly installed by a suitably qualified person, strictly in accordance with the manufacturer’s instructions. Please see the s o The manufacturer declines any responsibility for injury or damage, to person or property, D o The manufacturer declares that the cooktop is built using certified materials and requires the appliance to be installed in accordance with the standards currently in force. This appli T o The ceramic glass can be damaged by objects falling onto it. o The ceramic glass edge can be damaged by knocks from cookware. o Cast iron and cast aluminium cookware with damaged b scratch the ceramic surface if they are dragged across it. o Pans shou dragged. o Cooking zones should not be switched on with

o Bevelled edges o Ceramic hob scraper Product specifications: o 2 x 1.80 kW radiant zo es (Ø 180 mm) n 2 x 1.20 kW radiant zon o es (Ø 145 m Knob control operation o o 4 individual resi o Frameless Standard accessories:

ains Supply Lead: 3 core x 4 mm² (not supplied) good idea to cord this information before you install your appliance. ate of Purchase ………………………………. erami = 1.20 kW zone (Ø 145 mm) E Rated Voltage: 220-240 Vac 50-60 Hz 30A (double pole switched f outlet w Max Rated Inputs: 6.0 kW M For future reference please record the following information which can be found on the rating plate and the date of purchase which can be found on your sales invoice. The rating plate of your cooktop is located on the underneath of the appliance. Therefore it is a re Model Number ………………………………. Serial Number ………………………………. D C c cooktop surface layout 1 = 1.80 kW zone (Ø 180 mm) 2

U Before first use ic cooktop surface see “Cleaning and maintenance” section). umidity that has formed on the heating elements during transit. Do not burn off more than one zone at once. alf full with cold water on each cooking zone as you burn it off. ontrol knobs n be found on the right hand side of the hob top. the power level that you have set the zone to. , this image (left) indicates the rear left heating zone. witching on a cooking zone and setting a power level knob can be turned anti-clockwise or clockwise. indicate the hotter cooking zone temperatures. e that you turn the OFF position (“0”). IMPORTANT: You should clean the ceram ( o You should switch on one cooking zone at a time, for 5 minutes at the maximum setting. This will help to eliminate any new smell that exists and evaporate any h o You must place a saucepan filled h o C o All operations are performed by means of the 4 control knobs that ca o The control knob should be turned anti-clockwise or clockwise to select a heating level. The numbers around the outside of each control knob indicate o A marking next to each control knob indicates which cooking zone that it controls. For example S o Turn the control knob of the cooking zone that you wish to cook on. The control o The lower numbers (1-3) indicate the cooler cooking zone temperatures and the higher numbers (4-6) W o the control knob to hen you have finished cooking, make sur

o The residual heat indicator is located above the control knobs. ver 50°C and is therefore still high enough to cause injury. tor will go out after the temperature of the zone falls below 50°C. indicator will disappear if the mains supply to the product is cut. TOR HAS GONE OUT. USE CAUTION WHEN USING THE HOB. Cooktop guidelines g smell. This smell will disappear completely with repeated use. is fitted with cooking areas of different diametre and power. e same diametre as the cooking zone that they are being used on. ns with rough bottoms, as this can scratch the ceramic surface. e, make sure that the bottoms of the saucepans are clean and dry. ace of the cooktop. This will allow the heat to transfer more easily. steel and 4 – 6 mm for stainless steel with sandwich type bottoms. R o After a zone is switched off, the corresponding cooking zone residual heat indicator will illuminate. This means that the temperature of the zone is o o The residual heat indica o IMPORTANT: The residual heat o IT IS STILL POSSIBLE TO BURN YOURSELF ON A HOB ZONE, EVEN WHEN THE RESIDUAL HEAT INDICA o The first few times the cooktop is used, it may give off an acrid, burnin o The cooktop surface o The positions where the heat will radiate from are clearly marked on the cooktop. The saucepans must be positioned exactly on these zones for efficient heating to occur. Pans should have th o You should not use saucepa o Before us o When cold, the bottom of the pans should be slightly concave, as they expand when hot and lie flat on the surf o The best thickness for the bottom of the pans is 2 – 3 mm of enamelled

heat and energy. Heat not absorbed by the saucepan, will spread to the cooktop, frame and surrounding cabinets. o Preferably cover pans with a lid to permit cooking at a lower heat. o Always cook vegetables and potatoes, etc. in as little water to reduce cooking times. o Food or liquid that has high sugar content may damage the cooktop if it comes into contact with the ceramic cooktop surface. Any spillages should be wiped up immediately, however this may not prevent the cooktop surface from becoming damaged. o IMPORTANT: The ceramic cooktop surface is tough; however it is not unbreakable and can be damaged. Especially if pointed or hard objects are allowed to fall on it with some force. o DO NOT USE THE COOKTOP IF THE SURFACE BECOMES BROKEN OR CRACKED. YOU SHOULD CONTACT THE CUSTOMER CARE DEPARTMENT IMMEDIATELY. Cleaning and maintenance Cleaning operations must only be carried out when the cooktop is cool. The appliance should be disconnected from your mains supply before commencing any cleaning process. Cleaning the ceramic cooktop Any residues that are left on the cooktop surface from cleaning agents will damage it. You should remove any residues with warm water mixed with a little washing up liquid. Abrasive cleaners or sharp objects will damage the cooktop surface; you should clean it using warm water mixed with a little washing up liquid. Although it is easier to clean some deposits whilst the cooktop surface is still warm, you should take care not to burn yourself if cleaning the cooktop surface when it is still warm. After each use o Wipe the appliance over with a damp cloth. 12 o Dry the appliance by rubbing the surface with a clean cloth.

Remove Immediately? Remove when the appliance has cooled down? What should I use to remove the deposit? Sugar or food/liquid containing sugar Yes No Ceramic cooktop scraper Tin foil or plastic Yes No Ceramic cooktop scraper Fat splashes No Yes Ceramic cooktop cleaner Metallic discolouration No Yes Ceramic cooktop cleaner Water splashes or water rings No Yes Ceramic cooktop cleaner Using a ceramic cooktop scraper The following guidelines should be followed when using a ceramic cooktop scraper:- o The scraper should be placed on the ceramic surface at an angle. o Residues should be removed by sliding the blade carefully over the ceramic surface. o The ceramic surface should be wiped with a damp cloth that has been placed in warm water mixed with a small amount of washing up liquid. o Dry the appliance by rubbing the surface with a clean cloth. Using a specialist ceramic cooktop cleaner It is possible to purchase a specialist ceramic cooktop cleaner/conditioner. You should follow the instructions given by the manufacturer of the specialist ceramic cooktop cleaner. You should ensure that it is suitable for use on your appliance. 13

qualified person, in accordance with the current version of the following. o AS/NZS 3000: 2007 Wiring Regulations o 2010 Electricity Safety Regulations Positioning The adjacent furniture must be able to withstand a minimum temperature rise of 85°C above the ambient temperature of the room it is located in, during periods of use. This appliance is to be built into a kitchen unit (depending on size) or 600 mm worktop that is at least 30 mm thick. The following minimum clearance distances must be observed:- o 700 mm between the cooktop surface and the underside of any horizontal surface above it. o 65 mm clearance around the front and sides of the appliance, and 100 mm clearance at the back of the appliance, measured from the cut out, providing the material next to the cooktop is made of a non-combustible material. o If the cooktop is positioned so that the right or left hand side of the appliance will be near to the edge of a kitchen unit. There must be a gap of at least 100 mm between the side of the cooktop and the vertical surface of the kitchen unit. Unpacking the appliance When unpacking the appliance please check that the following items are contained within the packaging:- 1 Cooktop 1 Installation and instruction manual 1 Guarantee card 4 Fixing brackets 4 Fixing screws 1 Sealing strip 14

o Cut a hole in the worktop that corresponds with the relevant drawing shown above. o IMPORTANT: You must observe the ventilation requirements shown in the drawing above. 15

the outside of the cooktop. YOU MUST ensure that these holes are not blocked by the work top, when you put the cooktop into position (see drawing opposite). o NOTE: Your appliance comes fitted with a sealing strip already attached to the underside of the cooktop. This should not be removed as it will prevent liquid or spillages from penetrating the underneath of the cooktop. o IMPORTANT: Do not use a silicon sealant to seal the appliance against the aperture. This will make it difficult to remove the cooktop from the aperture in future, particularly if it needs to be serviced. o Carefully lower it into the aperture hole that you have cut out. (A) Clamp (B) Screw (C) Sealing strip o Place the clamp (A) over the holes that match the size of the screws. There are one set of screw holes in each corner of the cooktop. Slightly tighten a screw (B) through the clamp (A) so that the clamp is attached to the cooktop, but so that you can still adjust the position of it. o On the underneath of the cooktop, adjust the clamps into a position that is suitable for your worktop. Then fully tighten the screws (B) to secure the cooktop into position. 16

person in accordance with the latest edition of the Regulations currently in force and in compliance with the manufacturer’s instructi o AS/NZS 3000: 2007 Wiring Regulations o 2010 Electricity Safety Regulations Before connecting the appliance, make sure that the supply voltage marked on the rating plate corresponds with your mains supply voltage. WARNING: THIS APPLIANCE MUST BE EARTHED. o The appliance must be wired into a 30A double pole switched fused spur outlet, having 3 mm contact separation and placed in an easily accessible position adjacent to the appliance. It should not be located above the appliance and no more than 1.25m away from it. o The spur outlet must still be accessible even when your cooktop is located in its operating position. o Cable type: H05 VVF 3 core x 4 mm² Connecting the mains supply cable o The mains terminal block is located on the underside of the cooktop and the terminals are accessible by removing the terminal block cover. This is done by depressing the front of the cover and releasing it from the securing clips.

located on the bottom of the cooktop (see above). The links must also be positioned as indicated. o You should use a good quality screwdriver to carefully, fully tighten ALL of the terminal screws. o If when the cooktop is first switched on, only two of the zones work, you should recheck that the terminal screws are all fully tightened and the links are in position. This should be done before contacting the Customer Care Department. o IMPORTANT: The appliance must NOT be connected to the mains supply by means of a 10A or 15A plug and socket. o The cable can be looped if necessary, but make sure that is not kinked or trapped when the cooktop is in position. Care must be taken to avoid the cable being in contact with hot parts of the appliance. 18

If the mains supply cable is damaged, then it must be replaced by an appropriate replacement which can be obtained via the manufacturer or its service agents, in order to avoid hazard. The mains supply cable should be replaced in accordance with the following instructions: o Switch the appliance off at the socket. o Open the terminal block on the underside of the cooktop. o Unscrew the terminal screws fixing the cable. o Replace the cable with one of the same length and in accordance with the specification given on pages 17-18. o The “green-yellow” earth wire must be connected to the terminal marked . It must be about 10 mm longer than the live and neutral wires. o The “blue” neutral wire must be connected to the terminal marked with letter (N) - the live wire must be connected to the terminal marked with letter (L). 19

o The cooking zones are not functioning or will not switch on. * Check that the mains electrical supply to the appliance is correct and working. Check the mains fuse. o The residual heat indicator has not come on after I have switched a cooking zone off. * The cooking zone has only been turned on for less than 30 seconds. * IMPORTANT: If the cooking zone does appear to be hotter than 50°C or has been activated for longer than 30 seconds, and the residual heat indicator has not come on, you should call the Customer Care Department. o A humming sound is heard when a cooking zone is selected. * This is normal; the sound will disappear when the zone heats up. o The cooking zones have become discoloured. * This maybe caused by burnt on remnants of food. This will not affect the working of the appliance. However you should make sure that the cleaning instructions are being followed regularly.

operating correctly, then you should disconnect it from your mains supply and then contact Customer Care. DO NOT ATTEMPT TO REPAIR THE APPLIANCE YOURSELF. Please note that if a service technician is asked to attend whilst the product is under guarantee and finds that the problem is not the result of an appliance fault, then you may be liable for the cost of the call out charge. The appliance must be accessible for the technician to perform any necessary repair. If your appliance is installed in such a way that a technician is concerned that damage will be caused to the appliance or your kitchen, then they will not complete a repair. This includes situations where appliances have been tiled in, sealed in with sealant, have wooden obstructions placed in front of the appliance - like plinths, or any installation other than the one specified by the manufacturer has been completed. Please refer to the conditions of guarantee that appear on the warranty card that you receive with the appliance. IMPORTANT: The manufacturer operates a policy of continuous improvement and reserves the right to adjust and modify its products without prior notification. 21

Coolaroo VIC 3048 Sales Telephone 1300 132 824 Service Telephone 1800 444 357 Website www.baumatic.com.au (NZ) Applico Ltd. Private Bag 92900 Onehunga, Auckland, New Zealand 1061 Website www.baumatic.co.nz (UK) Baumatic Ltd. Baumatic Buildings, 6 Bennet Road, Reading, Berkshire RG2 0QX United Kingdom Sales Telephone (0118) 933 6900 Website: www.baumatic.co.uk 22