BenQ V32S Installation Manual

TV Tuner Installation Guide Package contents Check the contents in the package. If any item is missing or damaged, contact your place of purchase immediately. Installing the TV tuner 1. Turn off the LCD display. Disconnect the display from the power outlet and remove all connected audio and video signal cables. • TV tuner x1 • Installation guide x1 • Screw x1 2. Use a suitable screwdriver to remove the rear panel screw, and take the panel away from the display. 3. Remove the round plastic plate from the rear panel. 4. Insert the TV tuner all the way into the TV tuner slot. Note the direction of the TV tuner when inserting. 5. Use the screw that comes with the TV tuner package to secure the TV tuner onto the display.

1. Connect the TV antenna. 2. Reconnect all audio, video signal and power cables and turn on the display. 3. Refer to the instructions in the LCD Display Remote Control and TV Functions User's Guide to search and store TV channels. 6. Install the rear panel back on the display and tighten the rear panel screw. Connect the TV antenna cable to the TV antenna terminal on the TV tuner