Beamz 150.568 Manual 

Thank you for purchasing our company products. Please read these instructions carefully to enjoy optimum performance and a longer service life before you start to use. CONTENTS CONTENTS ............................................................................................................................................. 2 Unpacking Inspections ............................................................................................................................ 3 Unpacking instructions ........................................................................................................................ 3 Checking the contents of the carton: ................................................................................................... 3 Safety Instructions ................................................................................................................................... 3 Product Overview .................................................................................................................................... 4 Functions Introductions ........................................................................................................................... 4 Main Functions .................................................................................................................................... 4 Operation Instructions ......................................................................................................................... 5 Power supply connecting： ............................................................................................................. 5 Control panel operation ................................................................................................................... 5 DMX Mode ........................................................................................................................................... 6 Set DMX adres ................................................................................................................................ 6 Act mode（Standalone) ...................................................................................................................... 8 IR control ............................................................................................................................................. 9 Automatic Mode ............................................................................................................................... 9 Sound Active Mode ......................................................................................................................... 9 Manual Color Control. ...................................................................................................................... 9 DMX Mode Auto Sync ....................................................................................................................... 10 For the transmitting product. .......................................................................................................... 10 For the receiving product(s). .......................................................................................................... 10 DMX Mode Manual Sync: .................................................................................................................. 10 For the transmitting product. .......................................................................................................... 10 For the receiving product(s). .......................................................................................................... 11 IR/standalone mode auto Sync ......................................................................................................... 11 For the transmitting product: .......................................................................................................... 11 For the receiving product(s). .......................................................................................................... 11 Maintenance .......................................................................................................................................... 12 Specification .......................................................................................................................................... 12 CE & R&TTE Declaration of Conformity ................................................................................................ 13

UNPACKING INSPECTIONS Unpacking instructions  Please unpack the carton and check the goods carefully when you receive it , if discover packing damage, shortage or quality problem, please notify the shipper and reject the goods.  Before using this product, please read the instructions carefully and keep it in a safe place for future reference. Checking the contents of the carton: The product, Power cord, Instruction Manual, Remoter SAFETY INSTRUCTIONS  Safety and regulatory power socket with high quality output should be used .  Always connect the product to a grounded circuit to avoid the risk of electrocution.  Never put tiny metal objects such as a screwdriver, iron wire and coins, etc. into the internal or stretch into the machine in case of short circuit .  Please make sure to connect the proper voltage and do not higher or lower than that stated on the decal or rear panel of the product .  Avoid hitting, crashing or squeezing with other objects in transportation. Never carry the product from the power cord or any moving part . Always use the hanging / mounting bracket or the handles.  The product is used in door only .  Never pull or tug on the cord and change it for another one , stop using it when it is damaged or becomes hot .  Stop using the product once there is sparks when connecting with the power plug .  Can not operate product with wet hands and never place it near the water or other liquid.  Make sure there are no flammable materials close to the fixture while operating . Always install it in a location with adequate ventilation.  Never replace the lighting source with different specification and rating when the original one is damaged.  Make sure to power off before replacing the light source or the fuse. Never do it while it is on.  The ambient temperature is no more than 40°C(104°F) .  Never clean the fixture by water, thinner or other dissolved agent .  Stop using the product in case of a serious operating problem and send it to our maintenance agent immediately. Never repair by non-professional workers .  Avoid direct eye exposure to the light source while the product is on.

PRODUCT OVERVIEW 1. Control Panel 2. Power on/off 3. Battery indicator 4. Microphone 5. Auto Search 6. Safety Eyebolt 7. Master/Slave signal output 8. DMX signal input 9. DMX signal output 10. Power input 11. Power output 12. Antenna 13. LEDs FUNCTIONS INTRODUCTIONS Main Functions  3 or 4 DMX channels  Automatic, sound active and master/slave mode  Built-in 23 actions, run speed and strobe speed can be adjusted  With static colors, strobe, dimmer, color mixing and changing effects  IR Remote control  Can receive and transmit signal wirelessly

Operation Instructions Power supply connecting： Two sockets in the product, Power In and Power Out , the product can be supplied power by the power out. Maximum output power of the socket is 480W . Control panel operation Use the four buttons《MODE》《ENTER》《UP》 and《DOWN》to operate the control panel: SYS System settings S-Ir IR control ACT Action control, stand alone programs SLAU Slave mode, set receive frequency for IR & ACT use Press 《MODE》to find an operation mode or to back out of the current menu option. Press 《UP》to scroll up the list of options or to find a higher value. Press 《DOWN》to scroll down the list of options or to find a lower value. Press 《ENTER》to activate a menu option or a selected value. Maximum connecting machines are 22 units with the same model POWER OUT POWER IN

MODE Description SYS S dAd DMX address setup（001-509） d-CH 3CH 3CH DMX mode 4CH 4CH DMX mode s-tr t.CH Manually select transmit frequency (for IR&Act use) t001-t016 tA.S Automatically select Receive frequency (for IR&Act use) dt.CH Manually select Transmit frequency (for DMX use) dt01-t16 dtA.S Automatically select Transmit frequency (for DMX use) dr.CH Manually select receive frequency (for DMX use) dr.01-dr.16 drA.S Automatically select receive frequency (for DMX use) d-SL Sensitivity low to high (SL.00-SL.32) S AAd Reset software S-Ir IR Infrared remote control SLAu rA.S r-AU Automatical select receive frequency (For IR&Act use) r-St r001-r016 Manually select receive frequency (For IR&Act use) r001-r016 ACt A000 - A023 F000-F100 Strobe speed (slow to fast ) SL.00-SL.32 Sensitivity low to high (SL.00-SL.32) P000-P100 Run speed (slow to fast ) C000-C100 Brightness adjustment (dark to bright) DMX Mode Set DMX adres When selecting a starting DMX address, always consider the number of DMX channels. If you choose a starting address that is too high, you could restrict the access to some of the product’s channels. With 3Ch & 4CH, when in 4-channel DMX mode, it defines the highest configurable address 509. Follow below to select the DMX starting address Press repeatedly until SYS,ACt,SLAv,or S-1r shows on the display. Use or to select SYS. Press Use or to select SdAd from the menu Press Use or to select the starting address. Press With 3CH and 4CH,follow below to setup Press repeatedly until SYS, ACt, SLAv, or S-1r shows on the display. Use or to select SYS Press Use or to select d-CH from the menu Press Use or to select either the 3-channel mode (3CH) or the 4-channel mode (4CH) Press

DMX Value Functions 4 CH CHANNEL VALUE FUNCTION CH 2 CH 3 CH 4 1 Static colors Flash speed 000 – 249 Sound Active 250 – 255 000 – 009 Blackout 010 – 019 Red 020 – 029 Green 030 – 039 Blue 040 – 049 Red + Green 050 – 059 Red + Blue 060 – 069 Blue + Green 070 – 079 Red + Green + Blue Color Changes Run Speed Automatic 000 – 127 Sound Active 128 – 255 Flash speed 000 – 249 Sound Active 250 – 255 080 – 089 Color change 1 090 – 099 Color change 2 100 – 109 Quadrant Effect 1 110 – 119 Quadrant Effect 2 120 – 129 Quadrant Effect 3 130 – 139 Quadrant Effect 4 140 – 149 Quadrant Effect 5 150 – 159 Quadrant Effect 6 160 – 169 Quadrant Effect 7 170 – 179 Quadrant Effect 8 180 – 189 Color change 3 190 – 199 Color change 4 200 – 209 Color change 5 210 – 219 RGB Color Mix mode Red 0-100% Green 0-100% Blue 0-100% 220 – 229 Color Mode Fade speed 0-100% 230 – 255 Auto Run (sound active only) DMX Value Functions 3 CH VALUE CH 1 CH 2 CH 3 000 – 255 RED GREEN BLUE

Act mode（Standalone) Set the product in one of the standalone modes to control without connecting a DMX controller. Note: Never connect a product that is operating in any standalone mode to a DMX string connected to a DMX controller. Follow below actions to setup standalone mode: Press repeatedly until SYS,ACt,SLAv,or S-1r shows on the display. Use or to select Act Press Use or to choose your desired program (A000-A023). Press Note: Certain programs will have additional functionality. To find these options, press after selecting an auto program. Then press or . Not every program will feature all the added functionality. Function: F000 - F100 SL.00 – SL.32 P000 – P100 C000 – C1000 Description: Flash speed (slow to fast) Sound sensitivity Run speed (slow to fast) Dimmer Please refer to below: Display Function Run Speed (P) Flash Speed (F) Color (C) A000 Black 0 – 100 A001 Red 0 – 100 A002 Green 0 – 100 A003 Blue 0 – 100 A004 Yellow 0 – 100 A005 Purple 0 – 100 A006 Cyan 0 – 100 A007 White 0 – 100 A008 Color Change Run Speed Automatic 0 – 50 Run Speed Sound 51 – 100 0 – 100 A009 Action 1 0 – 100 A010 Action 2 0 – 100 A011 Action 3 0 – 100 A012 Action 4 A013 Action 5 A014 Action 6 A015 Action 7 A016 Action 8 A017 Action 9 A018 Action 10 A019 Action 11 A020 Action 12 A021 Any Color 0 – 100 (red) 0 – 100 (green) 0 – 100 (blue) A022 Color Fade 0 – 100 A023 Auto Run 0 – 100

IR control It is fully compatible with the IRC (Infrared Remote Control),please follow below to setup. Press repeatedly until SYS, ACt, SLAv, or S-1r shows on the display. Use or to select S-1r, Press , Begin using the IRC The functions of IRC: Automatic Mode Automatic Mode will enable you to run the automatic programs on the product. Press AUTO on the IRC. Press + or - to choose different auto programs. To adjust the speed of the automatic program. Press SPEED on the IRC Press + or - to either increase or decrease the speed of the program. Sound Active Mode Sound Active Mode will enable the product to respond to music and follow below actions. Press sound button. Adjust the sound sensitivity. Press sensitivity button. Press + or - to either increase or decrease sound sensitivity. Manual Color Control. To choose a specific color with the IRC. Press MANUAL on the IRC. Press any number between 0-9 to choose your color. To manually control the RGB percentage. Press MANUAL on the IRC. Press R, G, or B to choose your color. Press the number (percentage) you desired Press the button of %. For example: [MANUAL] -> [R] -> [5] -> [0] -> [%], red changes as 50%. strobe control. Follow below actions. Press the strobe button on the IRC, Use + o - to adjust strobe speed. Fade/snap. Press the button of Fade/snap, Use + or - to adjust speed. BLACK OUT. Use the button of BLACK OUT to turn on or turn off. Press the BLACK OUT to turn off. Press Auto button to turn on and press BLACK OUT to turn on or turn off with power of the product.

DMX Mode Auto Sync It offers wireless control of two or more products with a single DMX controller. To set syncing function for DMX functionality automatically, do the following: For the transmitting product. Press repeatedly until SYS, ACt, SLAv, or S-1r shows on the display. Use or to select SYS. Press . Press or until S-tr appears on the display. Press . Press or until dtA.S appears on the display. Press . The display should show dt.AU. For the receiving product(s). Press repeatedly until SYS, ACt, SLAv or S-1r shows on the display. Use or to select SYS. Press . Press or until S-tr appears on the display. Press . Press or until dRA.S appears on the display. Press . The display should show dR.AU. Once the steps above are done, press and hold on the transmitter for about 20 seconds and the signal LED of receiver will flash to indicate sync is activated. Cancel Auto Sync. Press the Auto button of the receiving product until the signal stops flash, which means the between the receiver and transmitter is cancelled. Auto Sync for receivers and transmitters: Repeat operations, match the next group after finishing matching the first group. (Power off other fixtures when you follow the actions and multiple groups can not be matched at the same time) One transmitter to multiple receivers. Follow the instructions and set one as transmitter, the others as receivers, set the auto Sync between one receiver and one transmitter, and then power off the receiver, match another pair. Power on all the receivers after finishing, multiple receivers can be controlled by one transmitter. DMX Mode Manual Sync: It can wireless control of two or more products with a single DMX controller. To manually set up the syncing function for DMX functionality, do the following. For the transmitting product. Press repeatedly until SYS,ACt,SLAv,or S-1r shows on the display. Use or to select SYS. Press . Press or until S-tr appears on the display. Press . Press or until dt.CH appears on the display. PRESS . Use or to select the transmitting signal (dt.01-dt.16).

For the receiving product(s). Press repeatedly until SYS, ACt, SLAv, or S-1r shows on the display. Use or to select SYS. Press . Press or until S-tr appears on the display. Press . Press or until dR.CH appears on the display. Press . Use or to select the receiving signal (dr.01 - dr.16). The channel. number should match the transmitting signal you chose in the prior steps. Two products can be matched after finishing above steps. Note: one transmitter can be used with multi receivers. Follow this actions and set one as transmitter, the others as receivers, one transmitter can be used with multi receiver products. IR/standalone mode auto Sync Two or more products can be controlled with no external controllers or with the IRC. To automatically set up syncing function for IR/standalone functionality, do the following. For the transmitting product: Press repeatedly until SYS, ACt, SLAv, or S-1r shows on the display. Use or to select SYS. Press . Press or until S-tr appears on the display. Press . Press or until tA.s appears on the display. Press . The display should show t-AU. For the receiving product(s). Press repeatedly until SYS, ACt, SLAv, or S-1r shows on the display. Use or to select SLAv. Press . Press or until rA.S appears on the display. Press . The display should show r-AU. Once the steps above are done, press and hold on the transmitter for approximately 20 seconds. The signal LED of the receiver will flash to indicate sync is activated. Note： cancel IR/standalone Auto Sync Press the Auto button of the receiver until the indicator stops flash, which means Sync data is cancelled. IR/standalone Auto Sync of multiple receivers and transmitters. Repeat operations, match the next group after finishing match the first group. (Power off other fixtures when you follow the actions and multiple groups can not be matched at the same time) One transmitter to multiple receivers: Follow the instructions and set one as transmitter, the others as receivers, set the auto Sync between one receiver and one transmitter, and then power off the receiver, match another pair. Power on all the receivers after finishing, multiple receivers can be controlled by one transmitter. Note: The distance of receiver and transmitter should be between 0.6 meter and 10 meter.

MAINTENANCE The unit should be cleaned periodically to ensure the optimum performance, the smudginess can decrease the life of light and the output of light is affected by the dust which can make the machine overheating. In general, make the maintenance at least two times a month. Be sure to power off the unit before cleaning . Do not clean until the unit recovers normal temperature since high temperature for using, use the lens tissue or soft cotton cloth with alcohol to wipe gently. Cleaning frequency depends on the environment in which the fixture operates, damp, smoky or dirty surrounding can cause greater accumulation of dirt on the optics. Never rub or press strongly on the panel. SPECIFICATION Voltage ...................................... 100-240V AC 50/60Hz Input current .......................................................... 0.4A Power .................................................................... 85W Fuse ................................................................ 2A 250V Light source ............................................... 198pcs LED ..................................................................... 60 pcs red .................................................................. 69pcs green .................................................................... 69pcs blue Built-in lithium battery ................................... 12V 8.8Ah Wireless DMX frequency .......... 2.433GHz – 2.481GHz Distance: ...................... R-T signal far from 250 meters Weight .................................................................. 3.3kg Size ....................................... L187 x W187 x H148mm

CE & R&TTE DECLARATION OF CONFORMITY Importer: TRONIOS BV Bedrijvenpark Twente 415 7602 KM - ALMELO Tel : 0031546589299 Fax : 0031546589298 The Netherlands Product number: 150.568 Product Description: Beamz, Wi-Par 198 LED RGB Batt. 2.4GHz DMX Regulatory Requirement: EN 60065 EN 55013: 2001/A2:2006 EN 55020: 2007/A11:2011 EN 61000-3-2/-3-3 EN 301489-1 V1.8.1 EN 301489-9 V1.4.1 EN 300422-1 V1.3.2 EN 300422-2 V1.2.2 The product meets the requirements stated in the above mentioned Standards. This certificate does not cover the aspects that may be relevant such as performance and fitness for purpose. Almelo, 10-03-2012

www.tronios.com Copyright © 2013 by TRONIOS the Netherlands