Artec A100TS Operation & User’s Manual

EQUALIZER INV ACOUSTIC TONE MODELLER ACOUSTIC TONE MODELLER STEREO LINE SWITCH Ch A / B Separate DSP EFFECT UNIT MERGED LINE OUT (BEFORE FX) FX FOOT SW DI DRIVER DI DRIVER SEPARATED LINE OUT (AFTER FX) PIEZO LO-Z HI-Z PIEZO PHANTOM PROGRAM LEVEL CH. A CH. B

DSP EFFECT Ch. separate ON DSP LEVEL : MAX 1 Guitar, 1 Pickup, DSP Stereo Setting Ch. A GUITAR SOUND with DSP EFFECT Ch. separate OFF 1 Guitar, 1 Pickup, POWER Setting GUITAR SOUND with DSP EFFECT Monaural guitar sound with Stereo DSP effect Deep stereo effect Ch. A Ch. A GUITAR SOUND with DSP EFFECT 2 Guitars Setting Ch. B GUITAR SOUND with DSP EFFECT Monaural guitar sound with Stereo DSP effect Ch. B XLR GUITAR SOUND with DSP EFFECT Ch. separate OFF Natural Guitars Setting GUITAR SOUND with DSP EFFECT Natural guitar sound with Stereo DSP effect Ch. B Notice: Feedback and howling Ch. separate ON Ch. A CH. A PIEZO SOUND with DSP EFFECT 1 Guitar, 2 Pickup, Stereo Setting Ch. B CH. B SOUNDHOLE PICKUP SOUND with DSP EFFECT Ch. A 1 Guitar, 2 Pickup, Stereo Setting with stereo plug STEREO PLUG CH. A PIEZO SOUND with DSP EFFECT CH. B SOUNDHOLE PICKUP SOUND with DSP EFFECT piezo Soundhole When plug to Ch.B, Speaker assign will be reversed True stereo sound True stereo sound XLR Ch. A GUITAR SOUND with DSP EFFECT Small Concert Setting Ch. B VOCAL SOUND with DSP EFFECT Stereo DSP effect Ch. B Notice: Feedback and howling Ch. A VOCAL Ch. A GUITAR SOUND with BGM Ch. separate OFF BGM Concert Setting Ch. B GUITAR SOUND with BGM Stereo DSP effect Ch. B Notice: Feedback and howling Ch. A BACKGROUND MUSIC Ch. separate ON Ch. separate ON Ch. separate ON

SPEAKER : 4 x 5 inch Acoustic Speaker OUTPUT : 100 watts music power AC POWER : 200W @ 230V FREQUENCY RANGE : 50Hz ~ 12kHz DIMENSION (H x W x D) 390 x 305 x 460 Ch. B TWO 5 inch Acoustic Speaker Ch. A TWO 5 inch Acoustic Speaker Sound Reflex Slot True-Stereo Wedge Angle Design CH.A 1/4” INPUT HI-Z : 5Mohm LO-Z MODE : 3kohm Max input level : +10dBV Max gain : 60dB EQ 150Hz (-10dB ~ +10dB) 800Hz (-10dB ~ +10dB) 3.5kHz (-10dB ~ +10dB) 9kHz (-10dB ~ +10dB) CH.B 1/4” INPUT HI-Z : 5Mohm LO-Z MODE : 3kohm XLR INPUT LO-Z : 4kohm (48V phantom) Max input level : +10dBV Max gain : 60dB EQ BASS 150Hz (-10dB ~ +10dB) TREBLE 4kHz (-10dB ~ +10dB) DSP EFFECTS 1 Hall 2 Cathedral 3 Room 1 4 Room 2 5 Room 3 6 Chamber 12 Delay/Reverb STEREO REVERB MODE CHANNEL SEPARATED MODE 7 Rotary 8 Chorus 1 9 Chorus 2 10 Flanger 11 Vib When use one channel at separate mode, STEREO FX makes effect sound to the other channel. It can makes deep stereo effect. When use these separated fx, SEPARATE switch ‘OFF’ is recommended to use both output channel. FX LEVEL CH1 CH2 CH1 INPUT CH2 CH1 OUTPUT CH2 STEREO REVERB FOOT SW CH SEPARATED FX FX LEVEL CH1 CH2 CH1 INPUT CH2 CH1 OUTPUT CH2 FOOT SW

POWER INDICATOR when another jack is unplugged STEREO CROSS-JACK TM for stereo acoustic guitar ex: piezo and magnetic soundhole pickup INPUT CLIP INDICATOR PIEZO MODE (HI-Z) INDICATOR & SWITCH 2 BAND EQUALIZER Ch.A Phase Reverse Switch for Anti feedback Ch. A and Ch.B Separate Switch and indicator DSP EFFECTS PROGRAM SELECTOR 1~6 : Reverbs 7~12 : Chorus, Flanger, Delay LEVEL CONTROL of DSP EFFECTS MASTER VOLUME PHANTOM POWER Switch & indicator (only XLR) Ch.B XLR balanced input GAIN CONTROL GAIN CONTROL CONTROL PANEL (TOP)

BALANCED LINE-OUT (AFTER DSP EFFECTS) UNBALANCED LINE-OUT (TWO CH. MERGED, BEFORE EFFECTS) EFFECTS ON/OF FOOT SWITCH POWER SWITCH FUSE AC CABLE CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN IMPORTANT SAFETY INSTRUCTIONS - DO NOT OPERATE NEAR ANY HEAT SOURCE AND DO NOT BLOCK ANY VENTILATION OPENINGS ON THIS APPARATUS. - ONLY CONNECT POWER CORD TO A POLARIZED, SAFETY GROUNDED OUTLET WIRED TO CURRENT ELECTRICAL CODES AND COMPATIBLE WITH VOLTAGE, POWER, AND FREQUENCY REQUIREMENTS STATED ON THE REAR PANEL OF THE APPARATUS. - ONLY USE ATTACHMENTS, ACCESSORIES, STANDS, OR BRACKETS SPECIFIED BY THE MANUFACTURER FOR SAFE OPERATION AND TO AVOID INJURY. - WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK OR FIRE, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. - SERVICE MUST BE PERFORMED BY QUALIFIED PERSONNEL. - OUR AMPLIFIERS ARE CAPABLE OF PRODUCING HIGH SOUND PRESSURE LEVELS. CONTINUED EXPOSURE TO HIGH SOUND PRESSURE LEVELS CAN CAUSE PERMANENT HEARING IMPAIRMENT OR LOSS. USER CAUTION IS ADVISED AND EAR PROTECTION IS RECOMMENDED IF UNIT IS OPERATED AT HIGH VOLUME. A PRODUCT OF ARTECSOUND CO., LTD. KOREA MADE IN CHINA