Allnet ALL7960 Operation & User’s Manual

1. Getting Started ...........................................................................................................................................5 1.1 Package contents................................................................................................................................5 1.2 Phone Specification ...........................................................................................................................6 1.3 Phone Description..............................................................................................................................7 1.4 Key Pad define & Text entry .............................................................................................................8 2. Connecting IP Phone .................................................................................................................................9 3. Setting up...................................................................................................................................................9 3.1 IP Phone Setup Map ..........................................................................................................................9 3.2 Display Name ..................................................................................................................................12 3.3 ADSL Dialup ...................................................................................................................................12 3.3.1 Enable ADSL Dialup ..............................................................................................................12 3.3.2 Setup ADSL ID.......................................................................................................................12 3.3.3 Setup ADSL Password............................................................................................................12 3.3.4 Disable ADSL Dialup .............................................................................................................13 3.4 DHCP (Dynamic Host Configuration Protocol)..............................................................................13 3.4.1 Enable DHCP..........................................................................................................................13 3.4.2 Disable DHCP ........................................................................................................................13 3.5 DNS Server IP .................................................................................................................................14 3.6 SNTP Server IP................................................................................................................................14 3.7 Do Not Disturb ................................................................................................................................14 3.8 CF (call forward) Unconditional .....................................................................................................15 3.9 CF (call forward) User Busy............................................................................................................15 3.10 CF (call forward) No Answer ........................................................................................................15 3.11 Anonymous Call ............................................................................................................................15 3.12 Anoy Call Rej. (Anonymous Call Rejection) ................................................................................16 3.13 Ringing Type..................................................................................................................................16 3.14 MAC Address ................................................................................................................................16 3.15 Version ...........................................................................................................................................16 3.16 Language Selection........................................................................................................................17 3.17 Time Format...................................................................................................................................17 3.18 Volume Adjustment........................................................................................................................17 3.18.1 Ringer Volume ......................................................................................................................17 3.18.2 Speaker Volume ....................................................................................................................17 3.18.3 Handset Volume....................................................................................................................17 4. Operating the phone.................................................................................................................................17 4.1 Dialing IP Address...........................................................................................................................17 4.2 Dialing SIP Number.........................................................................................................................18

4.4 Answering a Phone Call...................................................................................................................18 4.5 Switching to another Line................................................................................................................19 4.6 Mute.................................................................................................................................................19 4.7 Call Transfer ....................................................................................................................................19 4.8 Redial...............................................................................................................................................19 4.8.1 Last Dialed Number................................................................................................................19 4.8.2 Through Call History..............................................................................................................19 4.9 On Hold ...........................................................................................................................................20 4.10 Call Forward ..................................................................................................................................20 4.11 Three Way Conference...................................................................................................................20 5. Using the phone book ..............................................................................................................................20 5.1 Dialing from the Phonebook............................................................................................................20 5.2 Storing a Number.............................................................................................................................21 5.3 Editing a Number.............................................................................................................................21 5.4 Deleting a Number...........................................................................................................................22 6 Using the web configuration.....................................................................................................................23 6.1 Accessing Configuration Menu .......................................................................................................23 6.2 Web Login Setting ...........................................................................................................................23 6.3 Management Setting –Factory Setting.............................................................................................24 6.4 Network Setting – DHCP ................................................................................................................24 6.5 Network Setting – PPPoE................................................................................................................24 6.6 Network Setting – Static IP .............................................................................................................25 6.7 Protocol Setting ...............................................................................................................................25 6.8 SIP Setting – SIP Phone Setting, Registrar and Outbound Proxy Server........................................26 6.9 SIP Account Settings .......................................................................................................................28 6.10 IAX Settings ..................................................................................................................................29 6.11 STUN&UPnP Settings...................................................................................................................29 6.12 STUN&UPnP Settings – Manual Config External IP/Port ...........................................................30 6.13 STUN&UPnP Settings – UPnP Setting .........................................................................................30 6.14 STUN&UPnP Settings – NAT Keep Alive Time Settings.............................................................31 6.15 Audio Setting & QoS.....................................................................................................................31 6.16 Phone Settings ...............................................................................................................................32 6.17 Phone Settings – Auto Dial............................................................................................................32 6.18 Phone Settings – Timer..................................................................................................................33 6.19 System Log....................................................................................................................................33 6.20 Phone Book....................................................................................................................................34 6.21 One Touch Dial..............................................................................................................................35 6.22 Dialing Plan ...................................................................................................................................35 6.23 Factory Settings .............................................................................................................................36 6.24 Restart System ...............................................................................................................................36

8. CE Declaration.........................................................................................................................................39 9. GPL_Licensed Declaration......................................................................................................................40

is a quick user guide for the ALL7960 SIP Phone. It is intended to help you configure the telephone and have it ready to run within a few minutes. Please follow the user guide carefully as troubleshooting the telephone can be very difficult and time consuming. Safety Declaration 1. FCC Part 15 Class B 2. CE Class B 3. VCCI Class B 4. EN60950 1. Getting Started 1.1 Package contents The following materials are included in the package. Please check the package to ensure that all the materials are listed below. Contact your supplier immediately if any item is missing. Power Adaptor (5V DC) Ethernet Cable (1.5 meter) IP Phone (Model: All7960) User Manual

Protocol λ IETF SIP (RFC3261)* Network Interface λ RJ45 x 2, 10/100BaseT LCD Display λ 2 x 16 characters Key Pad λ 25 keys Call Features λ Call Hold λ Call Mute λ Call Retrieve λ Call Transfer λ Call Waiting λ Call Forward (Busy / No Answer / Unconditional) λ Caller ID Display λ Anonymous Call λ Anonymous Call Blocking λ In band DTMF / Out-of-band DTMF (RFC 2833) / SIP INFO λ Message Waiting Indicator λ 3-way Conference λ Redial Codec λ G.711µ-law λ G.711a-law λ G.729a/b Phone Functions λ Multi-user (4 SIP accounts) λ Speakerphone communication λ Pre-dial before sending λ Handset / Speakerphone Volume adjustment λ Speed dial (10 records) λ Phone book (200 records) λ Call history (Incoming calls / Outgoing calls / Missed calls) Security λ HTTP 1.1 basic/digest authentication for Web setup λ MD5 for SIP authentication (RFC 2069/ RFC 2617) Dial Methods λ Direct IP call without SIP registration λ Dial registered number via SIP server λ Dial URI from phone book / speed dial Voice Quality λ VAD (Voice Activity Detection) λ CNG (Comfort Noise Generation) λ AEC (Acoustic Echo Cancellation) λ G.168 λ Jitter buffer QoS λ ToS field Tone λ DTMF λ Ring Tones, 8 selectable λ Ring Back Tone (local and remote) λ Dial Tone λ Busy Tone IP Assignment λ Static IP λ DHCP λ PPPoE NAT Traversal λ UPnP λ STUN TCP/IP λ IP/TCP/UDP/DHCP/RTP/RTCP/ ICMP/HTTP/NTP/TFTP/DNS Configuration λ Key & LCD configuration λ Web browser configuration Firmware Upgrade λ TFTP Power λ Input AC 100-120V / 220-240V λ Output DC 5V Environmental λ Operating temperature: 0
40
λ Storage temperature: -20
60
λ Operating humidity: 20%
80% Physical Dimensions λ Size: 196(L) x 198(W) mm λ Weight: 760g λ Color: Black Certification Compliance λ FCC Part 15 Class B λ CE Class B λ VCCI Class B λ EN60950

No. Key Function (1) 2 x 16 Characters LCD Display Displays menu, time, clock, name, phone number, call status (2) LED Indicator Indicates that phone is currently in use or ringing (3) Up Cycle through the phone menu, adjust volume (4) 3-Way Conference Enable 3-way conference (5) OK / Right Confirm setting change, exit menu, dial, save changes (6) Menu Access the phone menu (7) Mute/Function Disable user’s microphone so that the person on the other line can not hear anything, access the language selection, access the time format (8) Transfer Transfer the person you are currently having a conversation to another line (9) Redial/Call History Redial last dialed number, access redial menu (10) Hold Place the person on the other line on hold, answer call waiting (11) Speaker Phone Enable user to use the phone without using the handset (12) Voice Message Check voice message (13) Down Cycle through the phone menu, adjust volume (14) Cancel / Left Deny changes, cancel phone calls, ignore phone calls, backspace (15) Phone Book Access the phonebook (16) Numeric Keypad Input IP/phone number/alphabet character (1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) (13) (14) (15) (16)

You use alphanumeric characters to enter details into the Phone Book, to create text and e-mail messages. The table below shows the characters that you can enter in the different text modes. Text Mode Text Mode Key Normal (ABC) Numeric (0-9) Key Normal (ABC) Numeric (0-9) 1 pqrsPQRS 7 abcABC 2 tuvTUV 8 defDEF 3 wxyzWXYZ 9 ghiGHI 4 @


⁄



( ) 0 jklJKL 5 . * mnoMNO 6 # In Normal and Numeric modes, each time you press in quick succession the next character available on that key in displayed. When you did not press key for more then 1 sec the current character will be selected and cursor will move right for next selection. For example, to enter “c” you need to press four times in quick succession. To enter the displayed character, release the key or press another key.

Connect the IP Phone as the following diagram: 3. Setting up 3.1 IP Phone Setup Map Wide Area Network / Internet Cable/xDSL Modem Router/HUB Ethernet Cable Ethernet Cable Power Adapter

Display Name: Allnet_45 ADSL DIALUP: ENABLE/DISABLE ADSL DIALUP: ENABLE ADSL DIALUP: DISABLE ADSL ID: 02…[email protected] ADSL Password: ******** DHCP: ENABLE/DISABLE IP Address: AUTO IP Address: 192.168.001.151 Subnet Mask: AUTO Router IP: AUTO Subnet Mask: 255.255.255.000 Router IP: 192.168.1.1 DNS Server IP: AUTO ENABLE/DISABLE – select enable or disable AUTO – IP address given by the router or ISP SNTP Server IP: 192.53.103.103 DNS Server IP: 192.76.144.66 Disable Enable

ENABLE/DISABLE CF Unconditional: ENABLE/DISABLE CF User Busy: ENABLE/DISABLE CF No Answer: ENABLE/DISABLE Anonymous Call: ENABLE/DISABLE Anony Call Rej: ENABLE/DISABLE Ringing Type: Ringing1/2/3…8 MAC Address: 000FC9022B04 Version: V: 01.03.03 Press the MENU key UPDATE CHANGES? OR Ringing1/2/3…8 - select ringing1, 2, 3… 8

MENU + CANCEL to quit without saving. The phone will automatically exit from the menu screen if there are no inputs from the user. NOTE 2: Use or to select ENABLE or DISABLE. NOTE 3: Left arrow key can be used as Backspace key. 3.2 Display Name
Press
Enter the display name 3.3 ADSL Dialup Some Internet Service Provider (mostly ADSL) uses PPPoE which requires that the user enter an ID and a password to access the Internet. In this case, enable ADSL DIALUP and enter the PPPoE ID and PPPoE password. 3.3.1 Enable ADSL Dialup
Press
Use to select “Enable” 3.3.2 Setup ADSL ID
Press
Enter ADSL ID 3.3.3 Setup ADSL Password
Press
Enter ADSL Password Display Name: Your name ADSL DIALUP: ENABLE ADSL ID: provider_ID ADSL Password: *******

Press
Use to select “Disable” 3.4 DHCP (Dynamic Host Configuration Protocol) DHCP allows the network administrator to distribute IP addresses when a computer is plugged into a different place in the network. If your ISP provides static IP address, you must disable DHCP and enter the IP address provided. 3.4.1 Enable DHCP
Press
Use or to set DHCP “Enable”
Press
IP address automatically acquired
Press
Subnet mask automatically acquired
Press
Router IP automatically acquired 3.4.2 Disable DHCP
Press
Use or to set DHCP “Disable”
Press ADSL DIALUP: DISABLE DHCP: ENABLE IP Address: 192.168.1.161 Subnet Mask: 255.255.255. 0 Router IP: 192.168.1.1 DHCP: DISABLE

Press
Enter the subnet mask
Press
Enter the router IP address 3.5 DNS Server IP The domain name system (DNS) is the way that Internet domain names are located and translated into Internet Protocol addresses. There is probably a DNS server within close geographic proximity to your ISP that maps the domain names in your Internet requests or forwards them to other servers in the Internet.
Press 3.6 SNTP Server IP Simple Network Time Protocol (SNTP) is a protocol used to help match your system clock with an accurate time source. If you do not know your SNTP Server IP, please ignore this section. SNTP Server IP address can be either URL or IP.
Press
Enter SNTP server IP or URL 3.7 Do Not Disturb This setting allows the user to reject all incoming phone calls.
Press
Use or to select “Enable” or “Disable” IP Address: 192.168.1.161 Subnet Mask: 255.255.255.0 Router IP: 192.168.1.1 DNS Server IP: 192. 76.144. 66 SNTP Server IP: 216.133.140.78 Do Not Disturb: ENABLE /DISABLE

Enable CF Unconditional to forward all the incoming calls to another number. Otherwise set to disable. You will need to use a web-browser to input the forwarded phone number. Refer to section 7.0 for more information on call forwarding.
Press
Use or to select “Enable” or “Disable” 3.9 CF (call forward) User Busy Forward all the incoming calls to another number when user is busy on the phone.
Press
Use or to select “Enable” or “Disable” 3.10 CF (call forward) No Answer Forward all incoming calls to another phone number after a certain number of rings.
Press
Use or to select “Enable” or “Disable” 3.11 Anonymous Call Enables the caller (user) to hide the name and phone number from the receiver.
Press
Use or to select “Enable” or “Disable” CF Unconditional: ENABLE / DISABLE CF User Busy: ENABLE / DISABLE CF No Answer: ENABLE / DISABLE Anonymous Call: ENABLE / DISABLE

Reject any anonymous incoming calls.
Press
Use or to select “Enable” or “Disable” 3.13 Ringing Type Select the ring tone. There are eight ring tones in total.
Press
Use or to select the ring type NOTE: At this point, you may save the settings and exit. The next two sections explain how to obtain the MAC address and firmware version.
Press to exit menu
When asked to save or cancel, press to save 3.14 MAC Address This menu displays the MAC address. User cannot modify MAC address.
Press
MAC address is displayed on the screen 3.15 Version Version menu displays the firmware version. You cannot modify the version number.
Press
Firmware version is displayed on screen Anony Call Rej: ENABLE / DISABLE Ring Type: Ringing 1/2/3/4/5/6/7/8 MAC Address: 000FC9017D4A LAN MAC Address: 000FC9017D4B Version: V: 01.03.03

The VoIP Phone (model no. Allnet 7960) supports 4 languages: English, German, Italian and Spanish.
Press followed by
Use or to select the preferred language 3.17 Time Format You may select the 12hr or 24hr time format.
Press followed by
Use or to select the time format
Press when done 3.18 Volume Adjustment 3.18.1 Ringer Volume While the handset is in place,
Press to increase the ringer volume and to decrease the ringer volume 3.18.2 Speaker Volume While the handset is in place,
Press
Press to increase the speaker volume and to decrease the speaker volume 3.18.3 Handset Volume
Pick up the handset and press to increase the volume or press to decrease the volume 4. Operating the phone 4.1 Dialing IP Address
Lift handset or press SPEAKER button Language: English Time Format: 24Hours

For example: dialing 192.168.0.1
Press OK or wait until the timer expires to dial. 4.2 Dialing SIP Number
Lift handset or press SPEAKER button
Dial SIP Number For example: dialing 1866
Press OK or wait until the timer expires. 4.3 Speed Dialing
Lift handset or press SPEAKER button
Dial Speed Dial number. For example: dialing speed dial number 08, 4.4 Answering a Phone Call Note: The CANCEL key may be used to reject a call. When phone rings:
Lift handset or press SPEAKER button to begin conversation.

While having a conversation:
Press Hold to switch to another line. 4.6 Mute Note: While mute is activated, sound from the caller can be heard from your speaker but your sound can’t be heard by the caller. While having a conversation:
Press Mute You may press Mute key again to resume conversation. 4.7 Call Transfer While having a conversation:
Press Hold to put the person on the other line on hold.
Dial the IP address or the extension number where you like the call to be transferred.
Press Transfer to transfer the call. 4.8 Redial Note: To return to idle mode, press CANCEL key 4.8.1 Last Dialed Number
Lift handset or press SPEAKER button
Press Redial to dial the last dialed number. 4.8.2 Through Call History
Press Redial . Does not lift the handset when you press Redial.
Press Redial again to cycle through the dialed, missed and received calls.
Press DOWN key to scroll down the dialed, missed or received lists until the number is displayed on the screen.

or press OK 4.9 On Hold Note: To transfer a call while on hold, press the TRANS key. Dial the extension/phone number and press the TRANS key again to transfer the call. While having a conversation:
Press HOLD (Press HOLD again to resume conversation) 4.10 Call Forward Please refer to IP Phone Setup and Web Browser Configuration section to setup call forwarding. 4.11 Three Way Conference
Pick up the handset and call Person A.
After Person A pick up the phone, press Hold key to place Person A on hold.
Dial the extension or phone number of Person B and wait until Person B picks up the phone.
Press Conference key to begin 3-way conference. 5. Using the phone book 5.1 Dialing from the Phonebook
Press the PHONE BOOK key to access the phone book.
Press to scroll down the list until the name is displayed on the screen. You Person A Person A You Person B

to dial. 5.2 Storing a Number
Press and hold the PHONE BOOK key until “Name:” is displayed on the screen.
Enter a name then press OK
Enter the number that corresponds to the name and press OK
Press OK again to save the phonebook.
Repeat Step 1 to 4 to store another phone number. 5.3 Editing a Number
Press the PHONE BOOK key to access the phonebook.
Press until the name is displayed on the screen.
Press the PHONE BOOK key again.
Select “Edit” and press OK to edit.
Enter a new name and press OK
Enter the new phone number and press OK
Press OK to save and override the previous name and phone number.

Press the PHONE BOOK key to access the phonebook.
Press until the name you want to delete is selected.
Press the PHONE BOOK key again.
Select “Delete” and press OK to delete.
Press OK again to save the new list on the phonebook.

The configuration web can be accessed using a web browser. 6.1 Accessing Configuration Menu 1. Open the web browser (ie. Internet Explorer, Netscape…) 2. Type in the IP Address of the phone followed by :9999 IP address is provided by your Internet Service Provider (ISP). If your ISP supports DHCP, you may obtain the IP address from you phone. Press “ Func.+ 9 ” to get IP address. Also can login from LAN port by http://192.168.15.1:9999 . Enter User Name and Password (leave User Name and Password blank if you are installing the phone for the first time) Click OK 6.2 Web Login Setting User Name Configuration menu login name. Password Configuration menu login password. NTP Server IP Network Time Protocol (NTP) is a protocol used to help match your system clock with an accurate time source (eg atomic clock, time server). It is good practice to have all your networked computers synchronized with one server.

6.3 Management Setting –Factory Setting Click on “Management”, Select “Factory Setting” and the above screen will display on the screen. Factory Setting Restores all the settings back to factory default settings. 6.4 Network Setting – DHCP DHCP Server Dynamic Host Configuration Protocol (DHCP) Server address. This IP address information is obtained automatically from your ISP. DNS Server DNS address provided by your ISP. 6.5 Network Setting – PPPoE Choose PPPoE if your ISP uses PPPoE. (Most DSL users use PPPoE). PPPoE ID PPPoE ID/username provided by your ISP. PPPoE Password PPPoE password. DNS Server DNS address provided by your ISP.

Choose Static IP network setting if all Wide Area Network IP is provided to you by your ISP. IP Address IP address assigned to you by your ISP. Router IP Router IP address. Subnet Mask Subnet mask address. DNS Server DNS server address provided by your ISP. NOTE: RESTART the system for new settings to take effect after you modify the IP address. 6.7 Protocol Setting Protocol Enable Enable SIP, IAX or both. Phone Display Number Display SIP or IAX phone number. SIP Dial Prefix Dial *0 (Default) to dial SIP number. IAX Dial Prefix Dial *1 (Default) to dial IAX number. Note: Phone rebooting is necessary when any of the above settings is changed

Session Initiation Protocol (SIP) is the most popular Voice over IP standard. It enables two or more people to make phone calls, share multimedia and make multimedia conference over the internet. Please have an administrator setup these settings for you or obtain this information from your SIP service provider. SIP Phone Port Number SIP phone port number. SIP Server Domain Name/IP Address Registrar server domain name or IP address. SIP Server Port Number Registrar server port number. Authentication Time Out The time that the phone waits to connect to the SIP server after the user dialed a number. If still not connected, the phone will disconnect and redial.

Enable/Disable no registration call. Outgoing Proxy Domain Name/IP Address Outbound proxy domain name or IP address. Outgoing Proxy Port Number Outbound proxy port number. Message Server Domain Name/ IP Address Message server domain name or IP address. Message Account Message server port number. Session Timer The time interval in which the phone periodically refresh SIP sessions by sending repeated INVITE requests. These INVITE requests allow the user agent or proxies to determine the status of the SIP session. Media Port Real-time Transport Protocol port number. Provides end-to-end transfer of data with real-time audio. Prack Prack ensures that media information is exchanged and that network checks before connecting the call. Select Enable for a more reliable connection. Session Refresher Select None to disable SIP session timer support. Select UAC to initiate SIP request. Select UAS to receive SIP request and then return a response. Session Timer Method Select SIP request method. Default method is Invite. Signal UDP/TCP Select SIP signal transmission method. Default method is UDP.

You may have up to 4 accounts. i.e., the IP phone can receive up to four different phone numbers. Default Account When you dial a number, the default account is used to dial. User Name of default account is displayed on the receiver’s IP phone. Account Active Enable or disable this account. Display Name Name displayed on the callee’s LCD.. SIP User Name The number in the URI displayed on the LCD for the caller. Authentication User Name User name to log into the SIP server. Authentication Password Password to log into the SIP server. Register Status Displays if the current phone is registered or unregistered with SIP server.

IAX Server The Asterisk server’s IP address IAX Server Port The port number for the Asterisk server. Default is 4569 IAX Local Port All7960 supports IAX2 protocol. Normally IAX2 uses Port 4569. IAX Number / IAX Name / IAX Username / IAX Password Number, name or password to log into the IAX server. IAX Refresh Interval (seconds) The time interval in which the phone periodically refresh IAX sessions by sending repeated INVITE or Update request. Register Status Shows register status. Note: Phone rebooting is necessary when any of the above settings is changed 6.11 STUN&UPnP Settings NAT traversal is a challenge that all Service Providers looking to deliver public IP-based voice service must solve. The challenge is to provide secure connection to subscribers behind NAT (Network Address Translation) devices and Firewalls. Overcoming this traversal problem will lead to widespread deployment of profitable voice over IP service to any subscriber with a broadband connection. Therefore, this IP Phone implements NAT traversal function for solving the Firewall and NAT traversal problems.

Translators is a protocol that allows applications to determine the types of NATs and firewalls are in between them and the internet. STUN also provides the ability for applications to determine the public IP addresses allocated to them by the NAT. STUN Server: Port number Enter STUN domain name or IP address if STUN is enabled. 6.12 STUN&UPnP Settings – Manual Config External IP/Port User Defined External IP/Port Enable or disable the settings for configuring the user defined external IP address and port number. External IP Address Setup the external IP address manually. Use Stun server to get external IP address. Use UPnP to get external IP address. External SIP Port External SIP port External Media Port External media port NOTE: It has to be complied with the settings of virtual server of the NAT devices if IP Phone enables the configuration manually. 6.13 STUN&UPnP Settings – UPnP Setting UPnP Enable or disable universal plug and play. Some NAT supports UPnP so STUN is not required and must be disabled.

Always send keepalive packet Enable or disable to send keepalive packet always. KeepAlive Time The time interval that the IP phone always sends the keepalive packet in order to ensure NAT works properly. 6.15 Audio Setting & QoS Codec Voice Compression Algorithm priority settings. Select from the most used codec to the least used codec. RTP Packet Size Real-Time Transfer Protocol (RTP) packet length. VAD Enable or disable VAD. DTMF Transmission Select the tone method for IP phone. Audio Priority TOS Sets the type of service (Layer 3) for this Internet datagram.

Tone Setting Select the tone for particular country Ringer Type Select the type of ring (1 to 8). Hold Tone Select melody or tone when HOLD key is pressed. Do Not Disturb Reject all incoming calls. Call Waiting Enable or disable call waiting. Anonymous Call 1. If DISABLE is selected, full URI and name are sent to the receiver’s phone when the user makes a phone call. The URI and name of the caller are displayed on the receiver’s phone. 2. When Full URI is selected, only user name is displayed on the receiver’s phone when the user makes a phone call. 3. When Display Name is selected, only name is displayed on the receiver’s phone when the user makes a phone call. Anonymous Call Reject Select Enable to reject anonymous calls. Call Forward 1. Click No Answer to enable call forward to another number when no one answers the phone after 180s (default). The timer can be changed from 0-600s. Refer to section 7.14 to change the timer. 2. Click Busy to enable call forward to another number when user is busy on the phone. 3. Click Unconditional to transfer all incoming calls to another number. Enter the call forward number on the text box. 6.17 Phone Settings – Auto Dial

Phone Number The phone number of auto dial. 6.18 Phone Settings – Timer NTP Recycle Timer NTP recycle time. Inter Digit Timer The time interval that the IP phone waits to detect the end of DTMF digits. No more digits are accepted after this period and the phone begins to dial. Originating Not Accept Timer The time interval that the caller’s phone waits to establish a call. If the receiver fails to answer the phone during this time interval, the caller’s phone will automatically disconnect. Incoming No Answer Timer The time interval that the receiver’s phone will ring. If the receiver fails to answer the phone during this time interval, the phone will automatically disconnect. Hold Recall Timer The time interval that the caller is put on hold before the phone automatically disconnect. Auto Speaker Off Timer The time interval that the speaker phone is on before turning off automatically (due to inactivity). 6.19 System Log Call Tracing Log keeps a record of all the phone activities. This log is used by our engineers to troubleshoot hardware problems.

Phonebook menu allows the user to add, modify and delete phone numbers. To add, type in the name and number then click NEW to add. To modify/delete, select the name from the list and click modify/delete. Name Name that you would like to add. Phone Number Phone number that corresponds to the name.

One Touch dial numbers can be accessed from the IP phone. Number 0x Speed dials phone number. 0x is the speed dial number. 6.22 Dialing Plan Click on Dialing Plan and the above screen will be displayed. Prefix Numbers defined in this field will be inserted at the beginning of the dialing pattern. Maximum input length is 6 digits. Min. Minimum digits user can key in. Max. Maximum digits user can key in. Del. Number of digit defined in this field will be removed from the dialing pattern. For example, if we dialed 81352109378 and the delete digit is 2, then the actual dialed number is 352109378. First 2 digits are removed. Maximum delete digit is 3 digits.

For example, if 001 is in this field, the number dialed is 001+the rest of the numbers. The input length is limited to 6 digits. IP Remote side gateway IP addresses. When the prefix number is matched, this call will go to the gateway with this IP address Protocol Choose the dialing plan for SIP or IAX. [Insert] Insert a record where the current record is located (Current record is marked as different color). [Append] Add a new record to the bottom of the list. [Delete] Delete a record. [Update] Modify the value of the selected record in the LATT. 6.23 Factory Settings Click on Factory Settings and the above screen will be displayed. Factory Settings Restores all the phone-settings back to factory default settings. You will also loose all entries in the phonebook! 6.24 Restart System Click Restart to update all the modifications and reboot the system.

The following troubleshooting information can be used to help solve most common problems. QUESTION RECOMMENDED ACTION There is no DIAL tone 1. Check if there are any loose connections. Nothing is displayed on the LCD screen 1. Check if power cord is connected properly. 2. Check if there is proper AC power coming from the power outlet. Why can’t I dial my friend’s SIP number? 1. Check Registrar Server Domain Name/IP address and Outbound Proxy Domain Name/IP Address (under SIP Settings in Configuration Menu). Make sure you have the right Name or IP Address. 2. Check the LCD display on your phone to see if there is a name or number displayed on the screen. If the name or number is not displayed, use a web browser and access the configuration menu. Make sure that the Registrar Server Domain Name/IP Address is correct. 3. Check the register status under SIP Account Settings in the configuration menu (from web browser). If your status is unregistered, it means you do not have a SIP account. Contact your SIP service provider to get an account. I accidentally set DSL to enable and now the phone does not boot up 1. Unplug the power cord from the IP phone. Wait 2 seconds and plug the power cord back in the IP phone. Press and hold MENU key. The system should bypass boot up and go straight into phone setup menu. Modify the phone setting and make sure you save it before you exit. TFTP firmware update method 1. Make sure you have a TFTP application installed on your PC. 2. Run Command Line and go to the directory which you have placed the firmware file. 3. Type in “tftp –i [IP of All7960] put [firmware file name]”. For example, tftp –i 193.169.80.125 put act_sip.gz 4. Firmware upgrading starts and it might take up to 5 minutes. 5. Firmware upgrading finishes after the automatic reboot.

EC – Declaration of conformity for ALL7960 This equipment conforms with the requirements of the Council Directive 89/336/EEC on the approximation of the laws of the member states relating to Radio and Telecommunication Terminal Equipment and the mutual recognition of their conformity. The safety advice in the documentation accompanying the products shall be obeyed. The conformity to the above directive is indicated by the CE sign on the device. The ALLNET ALL7960 conforms to the European Council Directives 89/336/EEC. This equipment meets the following conformance standards: EN 55022: 1998/A1: 2000/A2: 2003 Class B EN 61000-3-2: 2000/A1: 2001, EN 61000-3-3: 1995/A1: 2001 and EN 55024: 1998/A1: 2001/A2: 2003 (IEC 61000-4-2: 1995/A2: 2000, IEC 61000-4-3: 2002, IEC 61000-4-4: 1995/A2:2001, IEC 61000-4-5: 1995/A1: 2000 , IEC61000-4-6: 1996/A1: 2000, IEC61000-4-8: 1993/A1: 2000, IEC 61000-4-11: 1994/A1:2000 This equipment is intended to be operated in all countries. This declaration is made by ALLNET Computersysteme GmbH Maistr. 2 82110 Germering and can be downloaded from http://www.allnet.de/ce-certificates/ .

DISCLAIMER FOR ALLNET-PRODUCTS WHICH CONTAIN GPL-LICENSED SOFTWARE The Allnet-product you have bought is using Linux software and parts of the netfilter/iptables-project. (www.netfilter.org) , which both are licensed using the GPL (General Public License, available for download at www.gnu.org/home.de.html ). You can download the complete source-code of this product at www.allnet.de in the download-area for this model. ALLNET GmbH Maistraße 2 82110 Germering Tel.: +49 89 / 894 222 22 Fax: +49 89 / 894 222 33 [email protected] www.allnet.de Attention: Please be aware that any modifications of the firmware for this device will void the warranty. All modifications will be on your own risk and, in case of any damage to the device, Allnet can not repair or replace the device free of charge.