Altera PCA Operation & User’s Manual

This chapter provides information about architecture and block diagram of the PCA board. 5 2.1 2.1 Layout and Components Layout and Components The picture of the PCA card is shown in Figure 2-1 and Figure 2-2. It depicts the layout of the board and indicates the locations of the connectors and key components. Figure 2-1 The PCA Card PCB and component diagram (top view) ...

Pin 4 SEL0_B Pin 5 SEL1_B Pin 6 SEL2_B @1.25GHz @2.5GHz 0 0 0 0.5dB 1.2 dB 0 0 1 0.6dB 1.5 dB 0 1 0 1.0 dB 2.6 dB 0 1 1 1.9 dB 4.3 dB 1 0 0 2.8 dB 5.8 dB 1 0 1 3.6 dB 7.1 dB 1 1 0 5.0 dB 9.0 dB 1 1 1 7.7 dB(Default Setting) 12.3 dB(Default Setting) Receiver Detect Enable input for CH_A(Pin 7)&B(Pin 8) with 100kohm pull up resistors. RXD_A&B High indicates that the Receiver Detect Function Enable Table 3-6 SW2 Settings(Receiver Detect Function Enable for CH_A & CH_B) Pin 7 RXD_A Pin 8 RXD_B Receiver Detect Function En ...

PCIe cable connector is used to connect the PCIe X4 Cable and PCA cable connector, Connect the PCA by using a PCIe X4 Cable, as show Figure 3-3. Figure 3-3 PCIe X4 Cable and PCA To pur ...

1.1 Features ......................................................................................................................................................2 1.2 About the KIT.............................................................................................................................................3 1.3 Getting Help ................................................................................................................................. ...

register address is 0x04 based on PCIE_BAR1. A C++ class PCIE is designed to encapsulate the DLL dynamic loading for TERASIC_PCIE.DLL. A PCIE instance is created with the name m_hPCIE. To enumerate all PCIe cards in system, call the function where wVendorID and wDeviceID are zeros. The return value dwDeviceNum represents the number of PCIe cards found in the system. The m_szPcieInfo array contains detailed information for each PCIe card. To connect the selected PCIe card, the functions are called: where n ...