Ampire ACTIVE10-SL Owner's Manual
Text of the manual
German Engineering. Out of the ordinary.
Owner’s Manual
English
Before attempting to connect or operate this product, please read the instructions completely.
ACTIVE10-SL
• Pay utmost attention if you install the active subwoofer into the driver’s compartment.
• Use only in cars with a 12 Volt negative ground.
• Before wiring, disconnect the cable from the negative battery terminal to avoid short
circuits or electrical shocks. Make the correct connections.
• Do not connect the positive and ne
Remote Level Connector
Connect the remote controller to this terminal to adjust the subwoofer level from your driver seat.
o
2.
Phase switch
Controlls the subwofer polarity between 0° and 180°.
3.
Low-Pass Controller
Controlls the low pass frequency between 30Hz and 150Hz.
4.
Gain Controller
Controlls the subwoofers output level.
5.
RCA Inpu
Power supply voltage
: 10,5 - 15,0 VDC
Idling current
: 0,57 A
Idling current when off
: <0,1 mA
Fuse
: 20 A x 1
Amplifier Stage
Output power (Watt) @ 14,4 V Ω
: 250 Watt
Output power (max.) @ 14,4 V Ω
: 400 Watt
Phase Control
: 0° – 180°
Distortion (THD)
: >0,4 %
S / N Ratio
: >104 dB
Input sensivity
: 100 mV - 6,0 V
Filters
Space for Sketches
5
Electronics – Subject to correction and technical modifications
ampire
2016
EN
