AMX NMX-ENC-1100 Instruction Manual

Encoding Commands (Cont.) VIDSTRM_GOP Sets the GOP size for the video stream. GOP size determines the distance between two full image frames (I-frames) in the encoded video. Syntax: SEND_COMMAND ,"’VIDSTRM_GOP-’" Variable: gop = 15, 30, 60, 120, 240 Example: SEND_COMMAND VIDEO_INPUT_1,"’VIDSTRM_GOP-60’" ?VIDSTRM_PROFILE Requests the encoding profile for the video stream. Requests the selected encoding profile selected for streamed video output port addressed by the D:P:S. Syntax: SEND_COMMAND , "’?VIDSTRM_PROFIL ...

13 Instruction Manual - NMX-ENC H.264 Encoder PWR Power to the encoder is provided via a 2-pin 3.5mm locking Phoenix connector. Use the provided power supply with the power connector. See the procedures below if you prefer to use a different power supply. FIG. 21 displays the power connector. FIG. 21 Power connector Preparing Captive Wires You will need a wire stripper and flat-blade screwdriver to prepare and connect the captive wires. Note: Never pre-tin wires for compression-type connections. 1. Strip 0.25 inch (6.35mm) of insulation off all wires. 2. Insert e ...

Status Commands The following table lists the status commands for the encoder: Status Commands ?DISABLE_SWITCH Requests the state of LAN ports 2-4. Retrieves the current state of LAN ports 2-4. Syntax: SEND_COMMAND ,"'?DISABLE_SWITCH'" Example: SEND_COMMAND ENCODER_1,"'?DISABLE_SWITCH'" Returns ON or OFF. DISABLE_SWITCH Sets the state of LAN ports 2-4. Controls ports 2-4 of the LAN switch. Syntax: SEND_COMMAND ,"'DISABLE_SWITCH-'" Variable: option = ON or OFF Example: SEND_COMMAND ENCODER_1,"'DISABLE_SWITCH-ON'" Disabl ...