AMX NXA-WAP1000 Operation/reference Manual

Last Revised: 2/6/2013

1 NXA-WAP1000 Smart Wireless Access Point NXA-WAP1000 Smart Wireless Access Point Overview The NXA-WAP1000 (US operation: FG2255-51; Operation outside the US: FG2255-53), powered by Ruckus™, is a high-performance 802.11a/b/g/n smart Wi-Fi access point for homes and businesses that utilizes industry acclaimed Ruckus Wireless Technology. The NXA-WAP1000 can be deployed as a standalone access point or as part of a centrally- controlled Smart Wireless LAN when combined with the AMX NXA-WAPZD1100 Wireless LAN Zone Director. With a sleek modern design, small form factor, and Power over Ethernet (PoE), the NXA-WAP1000 can be mounted on the ceiling to maximize performance without disturbing aesthetics. The NXA-WAP1000 may be powered via PoE, or via the optional NXA-WAP1000 Power Supply (FG2255-61). FIG. 1 NXA-WAP1000 - Front FIG. 2 NXA-WAP1000 - Back OPT LED DIR LED POWER LED 2.4G LED 5G LED not used Hard Reset 10/100 Port (2) 10/100/1000 POE Port External Power

2 NXA-WAP1000 Smart Wireless Access Point Product Specifications NXA-WAP1000 (FG2255-51/53) Specifications Dimensions (HWD): 1 3/8” x 7" x 7" (36 mm x 178 mm x 178 mm) Weight: 0.88 lbs (397 g) Power: • External power supply (not included) • Input: 110-240V AC • Output: 12V DC, 1.5A • Power over Ethernet Class 0 • Consumption: 12.95W (PoE), 12W (12V DC) Ethernet Ports: • 2 auto MDX, auto-sensing 10/100 Mbps, RJ-45 ports • 1 auto MDX, auto-sensing10/100/1000 Mbps, RJ-45, POE port Antenna: Internal software-configurable antenna that provides over 300 unique patterns. Operating Frequency • IEEE 802.11n: 2.4 – 2.484 GHz and.5.15 – 5.85 GHz • IEEE 802.11a: 5.15 – 5.85 GHz • IEEE 802.11b: 2.4 – 2.484 GHz Wireless Output Power • 26 dBm for 2.4GHz • 24 dBm for 5GHz • Country-specific power settings are configurable Supported Data Rates: • 802.11n: 6.5Mbps – 130Mbps (20MHz) 6.5Mbps – 300Mbps (40MHz) • 802.11a: 54, 48, 36, 24, 18, 12, 9 and 6Mbps • 802.11b: 11, 5.5, 2 and 1 Mbps • 802.11g: 54, 48, 36, 24, 18, 12, 9 and 6 Mbps Power Source: • None: device uses Power Over Ethernet (PoE) via POE Injector or PoE Switch for necessary power. Front LED Indicators: PWR: • Off: Off. • Red: Boot up in process. • Green: On OPT: • Not active at this time. DIR: • Off: The NXA-WAP1000 is not being managed by an NXA-WAPZD1100 (standalone mode). • Green: The NXA-WAP1000 is being managed by an NXA-WAPZD1100. • Slow flashing green (one flash every two seconds): The NXA-WAP1000 is being managed by an NXA-WAPZD1100, but is currently unable to communicate with it. • Fast flashing green (two flashes every second): The NXA-WAP1000 is being managed by an NXA-WAPZD1100 and is currently receiving configuration settings (provisioning) or a firmware update. 2.4G: • Off: The WLAN service is down. • Amber: The WLAN service is up and no wireless clients are associated. • Green: The WLAN service is up and at least one wireless client is associated. • Flashing green (two flashes every second): The WLAN service is up and no wireless clients are associated.

3 NXA-WAP1000 Smart Wireless Access Point Power The AP does not have a power switch. It utilizes Power Over Ethernet (PoE), which draws power from its Ethernet connection. An optional power supply (FG2255-61) may also be used in circumstances where PoE is not available, via the External Power port (FIG. 2). Ethernet Ports The access point has two 10BASE-T/100BASE-TX RJ-45 ports and one 10/100/1000 RJ-45 port that can be attached directly to 10BASE-T/100BASE-TX LAN segments. These segments must conform to the IEEE 802.3-2005 specifications. These ports supports automatic MDI/MDI-X operation, so you can use straight-through cables for all network connections to PCs, switches, or hubs. NXA-WAP1000 (FG2255-51/53) Specifications (Cont.) Front LED Indicators (Cont.) 5G: • Off: The WLAN service is down. • Amber: The WLAN service (or mesh network) is up and at least one wireless client is associated, but RSSI is low. If mesh networking is enabled, at least one downlink MAP is connected. • Green: The wireless WLAN service (or mesh network) is up and at least one wireless client is associated. If mesh networking is enabled, at least one downlink MAP is connected. • Fast flashing green (two flashes every second): The WLAN service (or mesh network) is up, but no wireless clients or downlink MAPs are currently associated. • Slow flashing green (one flash every two seconds): The WLAN service is up, no wireless clients are currently associated, mesh networking is enabled and at least one downlink MAP is connected. Rear Components: OPT: • Not active at this time. Hard Reset: • Pressing, and then quickly releasing this internal button reboots the NXA-WAP1000. • Pressing and holding it for six seconds resets the NXA-WAP1000 to factory default settings. 10/100 Ports (2): • Two RJ-45 ports for 10/100Mbps connections. 10/100/1000 PoE Port: • One RJ-45 port for a 10/100/1000 PoE (Power over Ethernet, 802.3af) connection. External Power Port: • Connects a power supply (12 VDC/1.25A) to this port. Power may also be supplied via the 10/100/1000 PoE (802.3af) port. Operating Temperature: • Operating: 0 to 40 °C (32 to 104 °F) • Storage: -20 to 70 °C (32 to 158 °F) Operating Humidity: 15% to 95% (non-condensing) Certifications: • FCC • IC • CE • C-Tick • RoHS Included Accessories: • Category 5 (CAT5e) network cable • NXA-WAP1000 Installation Guide (93-2255-51) • Mounting Template (93-2255-55) • #4 sheet metal mounting screws (2) with molly bolts (2) for wall installation Other AMX Equipment: • NXA-WAP1000 Power Supply (FG2255-61) • NXA-ENET8-2POE PoE Switch (FG2178-63) • NXA-WAPZD1100 Wireless LAN Zone Director (FG2255-75)

3000 RESEARCH DRIVE, RICHARDSON, TX 75082 USA • 800.222.0193 • 469.624.8000 • 469-624-7153 fax • 800.932.6993 technical support • www.amx.com Increase Your Revenue through education + knowledge In the ever-changing AV industry, continual education is key to success. AMX University is dedicated to ensuring that you have the opportunity to gather the information and experience you need to deliver strong AMX solutions. Plus, AMX courses also help you earn CEDIA, NSCA, InfoComm, and AMX continuing education units (CEUs). Visit AMX University online for 24/7/365 access to: - Schedules and registration for any AMX University course - Travel and hotel information - Your individual certification requirements and progress