Aposonic A-E650V Operation & User’s Manual

USER'S GUIDE OSD User's GuideI V0.1 IR-1F1359V OSD User's Guide 2010/9/27 ! ! 1 ! A-E650V A-E650V

7 •WHITE BAL! 9 •BACKLIGHT! 12 •PICT ADJUST! 13 •ATR(WDR Function)! 14 •MOTION DET! 17 •PRIVACY! 19 •DAY / NIGHT! 22 •NR! 24 •CAMERA ID! 25 •LANGUAGE! 26 •CAMERA RESET! 26 •OSD TREE (FULL)! 27 •Default Register Table! 29 USER'S GUIDE V0.1 IR-1F1359V OSD User's Guide 2010/9/27 ! ! 2 ! A-E650V

A-E650V

(b) Selection Function : Select Function by using LEFT & RIGHt button (c) Adjustable Function : Functions with arrow sumbol, press ENTER button to enter branch menu (e) Next page : Press Enter to enter OSD menu page 2 (This OSD menu has total of 2 pages) (f) Exit : Leave OSD Menu (g)Save : Save all the settings (h)Default : Reset all the OSD settings back to the factory default (i) Back : Return to OSD Menu Page 1 (j) Adjustment Bar : Press LEFT or RIGHT button to adjust the values (k)Return : Return to TOP OSD menu from branch OSD menu USER'S GUIDE V0.1 2010/9/27 ! ! 4 ! IR-1F1359V OSD User's Guide A-E650V

OSD SHUTTER / AGC Shutter speed & AGC setting, it determines the image brightness under low lux or bright condition OSD WHITE BAL White balance mode setting, it determines the way the color is produced OSD BACKLIGHT Backlight setting OSD PICT ADJUST Basic image adjustment such as hue, saturation, contrast, sharpness OSD ATR Adaptive tone reproduction, software WD setting OSD MOTION DET Motion detect function, sense area, sensitivity setting OSD PRIVACY Privacy mask, color, transparency setting OSD DAY / NIGHT Color / Mono / Auto Mode setting OSD NR Noise Reduction setting OSD CAMERA ID Camera ID Setting OSD LANGUAGE OSD Language Setting, total of 8 languages available OSD CAMERA RESET Reset OSD setting OSD EXIT Leave OSD Menu USER'S GUIDE V0.1 2010/9/27 ! ! 5 ! IR-1F1359V OSD User's Guide A-E650V

1. MANUAL This function is for normal lens or vari-focal lens. 2. AUTO This function is for auto iris lens, system automatically adjusts the iris level to control the brightness. Option Content Description TYPE • VIDEO • DC VD circuit is not included in the module, it is recommended to use DC MODE • AUTO • OPEN • CLOSE AUTO : Syster automatically determines the iris level-light OPEN : Test function, iris will be opened to maximum CLOSE : Test function, iris will be closed SPEED 0-255 Speed for iris response , default is 80 0 : Slowest , 255 : Fastest SW-200_201 OSD User's Guide USER'S GUIDE V0.1 2010/9/27 ! ! 6 ! IR-1F1359V OSD User's Guide A-E650V

This function controls the shutter speed & AGC. AGC can automatic adjust the output signal level during the low lux condition. SW-200_201 OSD User's Guide USER'S GUIDE V0.1 2010/9/27 ! ! 7 ! IR-1F1359V OSD User's Guide A-E650V

• SHUT+ATUO IRIS (Note 1) • ATUO IRIS (Note 2) • Shutter Mode • Shutter + Auto Iris Mode • Auto Iris Mode BRIGHTNESS 0-255 Brightness Adjustment , default 60 0 for dark , 255 for bright Note 1: This function is appeared only when LENS : MANUAL is selected Note 2: This function is appeared only when LENS : AUTO is selected , when using Auto Iris Lens, it is recommended to set it to AUTO IRIS mode to avoid the color rolling issue. LOW LUMINANCE Option Content Description MODE • AGC • OFF Turn on AGC (so output signal amplified during low lux) Turn off AGC function BRIGHTNESS • X0.25 • X0.50 • X0.75 • X1.00 Brightness adjustment , default is x0.5 , x0.25 : Dark , x1.0 : Bright 2. MANUAL Option Content Content Description MODE SHUT+AGC SHUT+AGC Shutter + AGC SHUTTER • 1/60 • 1/100 • 1/250 • 1/500 • 1/1000 • 1/2000 • 1/4000 • 1/10000 Shutter Speed AGC • 6.00 • 12.00 • 18.00 • 24.00 • 30.00 • 36.00 • 42.00 • 44.80 AGC value SW-200_201 OSD User's Guide USER'S GUIDE V0.1 2010/9/27 ! ! 8 ! IR-1F1359V OSD User's Guide A-E650V

sources & temperature, so that objects appear white in person are rendered white on final output to TV. SW-200_201 OSD User's Guide USER'S GUIDE V0.1 2010/9/27 ! ! 9 ! IR-1F1359V OSD User's Guide

Color Rolling suppress 2. MANUAL Manually adjust the white balance Option Content Description LEVEL 19-44 Manually adjust the white balance , default is 44 , 19 for low temperature 44 for high temperature LEVEL: 32 (Left)LEVEL: 19 (Right)LEVEL: 44 3. PUSH LOCK Press OSD ENTER button to lock the current white balance, once it is locked, the white balance will not operate even when light temperature is changed. SW-200_201 OSD User's Guide USER'S GUIDE V0.1 2010/9/27 ! ! 10 ! IR-1F1359V OSD User's Guide

Option Content Description SPEED 0-255 Setting for ATW response time, default is 239, 0 for slowest delay & 255 for fastest DELAY CNT 0-255 Setting for ATW delay time ,default is 16, 0 for shortest delay & 255 for longest ATW FRAME • x1.00 • x1.50 • x2.00 • x0.50 No effect, system already set it to full frame ENVIRONMENT • INDOOR • OUTDOOR No effect, system already set it to accomplish for both indoor & outdoor 5. PUSH Similar to ATW, but system will force to track white balance continuously 6. USER1 User define white balance Option Content Description B-GAIN 0-255 Adjust B-Gain value R-GAIN 0-255 Adjust R-Gain value 7. USER2 User define white balance Option Content Description B-GAIN 0-255 Adjust B-Gain value R-GAIN 0-255 Adjust R-Gain value SW-200_201 OSD User's Guide USER'S GUIDE V0.1 2010/9/27 ! ! 11 ! IR-1F1359V OSD User's Guide

light source. (1) OFF (DEFAULT) (2) BLC : Back light compensation (3) HLC : High light compensation Turns the excessive white light into black, it is mainly used for recognization of the car plate during the night.When excessive light source is behind the object. LEFT : Normal Image RIGHT : Image with BLC ON When excessive light source is presented LEFT : Normal Image RIGHT : Image with HLC ON SW-200_201 OSD User's Guide USER'S GUIDE V0.1 2010/9/27 ! ! 12 ! IR-1F1359V OSD User's Guide

Option Content Description MIRROR • OFF • ON Flip image horizontally BRIGHTNESS 0-255 brightness (default : 0) CONTRAST 0-255 contrast ( default : 128) SHARPNESS 0-255 Sharpness (default : 128) HUE 0-255 Color Hue (default : 102 for NTSC , 108 for PAL) GAIN 0-255 Color Saturation ( Default : 128) SW-200_201 OSD User's Guide USER'S GUIDE V0.1 2010/9/27 ! ! 13 ! IR-1F1359V OSD User's Guide

This function is to softwarely achieve Wide dynamic range, when this function is ON, the brightness of the darker region will be slightly brighter, and same for the brighter region, the brightness will be slightly darker 1. OFF 2. ON Option Content Description LUMINANCE • LOW • MID • HIGH BRIGHTNESS DEFAULT : LOW CONTRAST • LOW • MID LOW • MID • MID HIGH • HIGH CONTRAST DEFAULT : LOW SW-200_201 OSD User's Guide USER'S GUIDE V0.1 2010/9/27 ! ! 14 ! IR-1F1359V OSD User's Guide

!"#$%&#'()*%+,-.'/&,%)0)1++&,213)456/".)788(&#'/&,%)9,/"6)2) :"-;<;=;<) >'%?'-5) @A/$B) @

Picture below : Image with ATR ON SW-200_201 OSD User's Guide USER'S GUIDE V0.1 2010/9/27 ! ! 16 ! IR-1F1359V OSD User's Guide

blinks when object movement is detected. GPIO 1 of the module will output alarm signal (3.3V) when movement is detected. Normally it outputs 0V. Motion Detect Frame : The frame blinks when any movement is detected within the frame. SW-200_201 OSD User's Guide USER'S GUIDE V0.1 2010/9/27 ! ! 17 ! IR-1F1359V OSD User's Guide

0 for lowest sensitivity, 255 for highest sensitivity. BLOCK DISP • OFF • ON • ENABLE* Display the motion detect grid, default OFF MONITOR AREA • ON • OFF Display the motion detect frame when movement detected , default ON Option Content Description AREA SEL • 1/4 • 2/4 • 3/4 • 4/4 Frame location setting, total of 4 frames available TOP 0-244 Frame boundary (TOP) BOTTOM 0-244 Frame boundary (BOTTOM) LEFT 0-474 Frame boundary (LEFT) RIGHT 0-474 Frame boundary (RIGHT) SW-200_201 OSD User's Guide USER'S GUIDE V0.1 2010/9/27 ! ! 18 ! IR-1F1359V OSD User's Guide

SW-200_201 OSD User's Guide USER'S GUIDE V0.1 2010/9/27 ! ! 19 ! IR-1F1359V OSD User's Guide

of 4 frames available TOP 000-244 (NTSC) 000-288 (PAL) Mask boundary (TOP) BOTTOM 000-244 (NTSC) 000-288 (PAL) Mask boundary (BOTTOM) LEFT 000- 474(NTSC) 000- 468(PAL) Mask boundary (LEFT) RIGHT 000- 474(NTSC) 000- 468(PAL) Mask boundary (RIGHT) COLOR 1 ~ 8 Mask Color Setting 1. Red 2. Green 3. Purple 4. Yellow 5. Cyan 6. Pink 7. White 8. Black SW-200_201 OSD User's Guide USER'S GUIDE V0.1 2010/9/27 ! ! 20 ! IR-1F1359V OSD User's Guide

1.0 = 0% Transparency , 0.0 = 100% Transparence MOSAIC • OFF • ON Mosaic ON/OFF Setting Transparency：1.00(Left) 0.00(Right) Transparency：0.50(Left) 0.75(Right) SW-200_201 OSD User's Guide USER'S GUIDE V0.1 2010/9/27 ! ! 21 ! IR-1F1359V OSD User's Guide

Setting for the DAY/NIGHT or COLOR/BW mode. When system switch to BW mode, GPIO 0 of the module will output a 3.3V signal. Normally it outputs 0V. 1. AUTO Option Content Description BURST • OFF • ON Burst ON/OFF during low lux mode, default : OFF DELAY CNT 0-255 Mode switch delay time , default : 1, 0 for slowest delay , 1 for fastest delay DAY→NIGHT 0-255 Color to B/W mode switch threshold , default : 3 , 0 for lowest threshold , 255 for highest threshold NIGHT→DAY 0-255 B/W to color mode switch threshold , default : 5 , 0 for lowest threshold , 255 for highest threshold SW-200_201 OSD User's Guide USER'S GUIDE V0.1 2010/9/27 ! ! 22 ! IR-1F1359V OSD User's Guide

DAY→NIGHT DAY→NIGHT NIGHT→DAY NIGHT→DAY Value Lux Value Lux 5 0.97 5 2.43 10 2.20 10 6.31 15 3.32 15 10.89 20 4.86 20 14.18 25 9.16 25 17.47 30 12.94 30 22.67 35 18.50 35 28.62 40 20.76 40 32.36 45 25.61 45 36.07 50 27.03 50 45.62 2. COLOR COLOR MODE 3. B/W B/W MODE Option Content Description BURST OFF ON Burst ON/OFF Setting SW-200_201 OSD User's Guide USER'S GUIDE V0.1 2010/9/27 ! ! 23 ! IR-1F1359V OSD User's Guide

color pixels. Option Content Description NR MODE • Y/C • OFF • Y • C noise reduction mode adjustment Y LEVEL 0-015 Luminance noise reduction , default : 4, 0 for minimum reduction, 15 for maximum reduction C LEVEL 0-015 Color noise reduction , default : 4, 0 for minimum reduction, 15 for maximum reduction SW-200_201 OSD User's Guide USER'S GUIDE V0.1 2010/9/27 ! ! 24 ! IR-1F1359V OSD User's Guide

2 rows & 26 characters are availables, characters including 26 alphabets & numbers & symbols 1. OFF 2. ON Content Description CHR1 Default characters CHR2 User define characters (maximum of 40), please contact to sales if it is required ←→↑↓ Move the location of the cursors CLR Clear the highlight character & move to next character POS Use OSD UP/DOWN/LEFT/RIGHT button to adjust the ID locations Press ENTER when it is finished SW-200_201 OSD User's Guide USER'S GUIDE V0.1 2010/9/27 ! ! 25 ! IR-1F1359V OSD User's Guide

1. Japanese 2. German 3. French 4. Russian 5. Portuguese 6. Spanish 7. Simplified Chinese 8. English CAMERA RESET Return all the OSD settings to factory default (SAVE ALL must be applied in order to keep the settings after power ON/OFF) SW-200_201 OSD User's Guide USER'S GUIDE V0.1 2010/9/27 ! ! 26 ! IR-1F1359V OSD User's Guide

SW-200_201 OSD User's Guide USER'S GUIDE V0.1 2010/9/27 ! ! 27 ! IR-1F1359V OSD User's Guide

OSD Functions OSD Functions OSD Functions OSD Functions Default NTSC Default PAL LENS MANUAL* LENS AUTO TYPE DC DC LENS AUTO MODE AUTO AUTO LENS AUTO SPEED 80 80 SHUTTER / AGC AUTO* HIGH LUMINANCE MODE SHUT SHUT SHUTTER / AGC AUTO* HIGH LUMINANCE BRIGHTNESS 60 60 SHUTTER / AGC AUTO* LOW LUMINANCE MODE AGC AGC SHUTTER / AGC AUTO* LOW LUMINANCE BRIGHTNESS X0.50 X0.50 SHUTTER / AGC MANUAL MODE SHUT+AGC SHUT+AGC SHUTTER / AGC MANUAL SHUTTER 1/60 1/60 SHUTTER / AGC MANUAL AGC 6 6 WHITE BAL ANTI CR* WHITE BAL MANUAL 44 44 WHITE BAL PUSH LOCK WHITE BAL ATW SPEED 239 239 WHITE BAL ATW DELAY CNT 16 16 WHITE BAL ATW ATW FRAME X1.00 X1.00 WHITE BAL ATW ENVIRONMENT INDOOR INDOOR WHITE BAL PUSH WHITE BAL USER1 B-GAIN 29 29 WHITE BAL USER1 R-GAIN 34 34 WHITE BAL USER2 B-GAIN 45 45 WHITE BAL USER2 R-GAIN 26 26 BACKLIGHT OFF* BACKLIGHT BLC BACKLIGHT HLC PICT ADJUST MIRROR OFF OFF PICT ADJUST BRIGHTNESS 0 0 PICT ADJUST CONTRAST 128 128 PICT ADJUST SHARPNESS 128 128 PICT ADJUST HUE 102 108 PICT ADJUST GAIN 128 128 ATR OFF* ATR ON LUMINANCE LOW LOW ATR ON CONTRAST LOW LOW MOTION DET OFF* MOTION DET ON DETECT SENSE 115 115 MOTION DET ON BLOCK DISP OFF OFF MOTION DET ON MONITOR AREA ON ON MOTION DET ON AREA SEL 1/4 1/4 MOTION DET ON TOP 1 80 100 MOTION DET ON BOTTOM 1 150 170 MOTION DET ON LEFT 1 190 190 MOTION DET ON RIGHT 1 310 290 SW-200_201 OSD User's Guide USER'S GUIDE V0.1 2010/9/27 ! ! 29 ! IR-1F1359V OSD User's Guide

AUTO* BURST OFF OFF DAY / NIGHT AUTO* DELAY CNT 1 1 DAY / NIGHT AUTO* DAY→NIGHT 3 3 DAY / NIGHT AUTO* NIGHT→DAY 5 5 DAY / NIGHT COLOR DAY / NIGHT B/W BURST OFF OFF NR NR MODE Y/C Y/C NR Y LEVEL 4 4 NR C LEVEL 4 4 * marks represent the factory default function SW-200_201 OSD User's Guide USER'S GUIDE V0.1 2010/9/27 ! ! 30 ! IR-1F1359V OSD User's Guide