Alpine X901D Owner's Manual

Dual Screen allows you to display the Navigation and Audio/Visual screens simultaneously. * Touch [ ], or swipe to the left to switch to the Navigation menu screen. For details of navigation operations, refer to “Navigation System OM” in the CD-ROM. You can switch the left/right positions of the Audio/Visual screen and Navigation screen. Each time you touch , the positions of Audio/Visual screen and Navigation screen switch. • When is not displayed, touch [ ]. Dual Screen Display Position Audio full Screen Touch [ ], or swipe to the left. Touch [ ], or swipe to t ...

The following example explains how an Artists search is performed. Another search mode can be used for the same operation, although the hierarchy differs. 1 Touch [Artists] in the Full Search mode screen. The Artists search screen is displayed. • To switch into Full Search mode, see in “Quick Search mode screen example” (page 59). 2 Select the desired artist. To play back the Artist directly 1 Touch [ ] of the artist’s name. All songs of the selected artist are played back. To search for the Album of the Artist 1 Touch the selected artist na ...

Function mode Source Title/Band display Displays the band of the signal currently being received. RDS indicator Info area Station Info. Mode: PTY / Frequency or PS / Artist Name / Song Name / Album Name Radio Text Mode: Frequency / Radio Text • For details on switching the display of the Radio text, see “Displaying Radio Text” (page 51). Preset mode button Touch or swipe to the right when you use the Preset mode screen. Preset mode screen example Preset button Swipe vertically in the list to change pages. PTY list button Swipe to the right when you ...

To operate devices connected to the AUX terminals of the unit, follow the procedure described below. • Set AUX to “On.” See “AUX Setup” (page 43). • Depending on the connected unit, the onscreen buttons may not work, or their operation may differ. Press the (AUDIO) button to select Auxiliary (AUX)* mode. The display shows the Auxiliary (AUX) mode screen. * The name which is given as the mode name in “Setting the Auxiliary (AUX) Name” (page 43) is displayed. • For your safety, video is not displayed and only audio can be heard whil ...

Be sure to press the RESET switch when using the unit for the first time, after changing the car battery, etc. 1 Turn off the unit power. 2 Press the RESET switch with a ballpoint pen or similar pointed object. Adjusting the Volume Adjust the volume by pressing or . Volume decreases/increases continuously by pressing and holding or . Volume: 0 - 35 Lowering Volume Quickly Audio Mute function instantly lowers the volume level to 0. 1 Press the (MUTE) button to activate the MUTE mode. The audio level will be 0. 2 Pressing the (MUTE) button again will bring the au ...

1 Press the (AUDIO) button to select radio mode. The display shows the radio mode screen. • You can select and change the source from the Menu screen (page 19) or the Favourite screen (page 22). 2 Touch [ ]. The radio band select pop up screen is displayed. • [ ] button displays the current selected band. (e.g. [FM1]) 3 Select the desired band from FM1/FM2/MW/LW. 4 Touch [ ]. The tuning mode selection popup is displayed. • [ ] button displays the current selected mode. (e.g. [DX Seek]) 5 Touch the desired tuning mode. The radio frequency up or down button ch ...