AES MultiCom 500 Installation Manual & User Instructions
Text of the manual
P a g e | 1
Installation Manual & User Instructions
For
MultiCom 500
Multi resident GSM Intercom System
P a g e | 2
Contents
Introduction
…………….Pg 3
Getting Started
…………….Pg 3
SIM card
…………….Pg 3
Wiring
…………….Pg 4
Overview
…………….Pg 4
Mounting
…………….Pg 5
Inserting the SIM Card
…………….Pg 5
Powering up
…………….Pg 5
Programming
…………….Pg 5
Programming by Keypad & LCD
………�
P a g e | 3
Introduction
This GSM intercom uses the cellular networks to dial pre-programmed telephone numbers when
an apartment number is called or family name is selected from the directory.
The 500 model will dial 3 numbers for 500 apartments. These numbers can be fixed line
telephones or mobile cell phones or both.
Any phone which receives a call from t
P a g e | 4
5)
If the SIM card was purchased along with a phone, then it may be locked to that phone.
Ask your network provider to unlock the SIM so that it can be used in another device.
6)
Insert the working SIM card and connect the antenna as shown below BEFORE
connecting the power.
open
close
Wiring
Connect power to the unit as per diagram below.
Notes:
P a g e | 5
Mounting
Hinge
front door
Wall mount
Hinge front
door
Gooseneck mount
5/16 (M8)
bolts
3" hole
centres
3" hole
centres
Inserting the SIM card
Note: This unit is a dual 2G/3G system, operating on either 2G or 3G network frequencies of
850/900/1800/1900MHz.
open
close
1)
Put the SIM into a phone to activate and register it with the network.
2)
If y
