Acorp 4S845A Operation & User’s Manual

made carefully for reliability; however, no responsibility is assumed for inaccuracies. Specifications are subject to change without notice. IBM, PC/AT, and PC/XT are trademarks of Interna- tional Business Machines Corporation. Socket478 is a trademark of Intel Corporation AWARD is a registered trademark of Phoenix Software Inc. MS-DOS and WINDOWS NT are registered trade- marks of Microsoft Corporation. Trademarks and/or registered trademarks are the properties of their respective owners. User's Manual Version 1.0 4S845A i

Intrnctctinn Intrnctctinn Intrnctctinn Intrnctctinn Intrnctctinn 1. Mnthdranarc Ddrcriotinn 1. Mnthdranarc Ddrcriotinn 1. Mnthdranarc Ddrcriotinn 1. Mnthdranarc Ddrcriotinn 1. Mnthdranarc Ddrcriotinn 1.1 Fdattrdr 1.1.1 Harcward 1-1 1.1.1 Snetward 1-4 1.1.3 Attachmdntr 1-4 1.1 Mnthdranarc Inrtallatinn 1.1.1 Mnthdranarc Mao 1-5 1.1.1 Mnthdranarc Layntt 1-6 1.3 Mnthdranarc Cnnndctnrr 1.3.1 Frnnt Pandl Cnnndctnr(PANEL( 1-8 1.3.1 Flnooy Dirk Cnnndctnr(FDC( 1-9 1.3.3 Harc Dirk Cnnndctnrr(IDE1.IDE1( 1-9 1.3.4 ATX 4-oin.1/-oin Pnwdr Cnnndctnr(ATX.J8( 1-1/ 1.3.5 Inerardc Cnnndctnr 1-11 1.4 Back Pandl Cnnndctnrr 1.4.1 PS.1 Mntrd.Kdyanarc CNNN. 1-11 1.4.1 USB Cnnndctnrr 1-11 1.5 Sdrial anc Paralldl Intdreacd onrtr 1-13 1.6 CPU Inrtallatinn 1.6.1 CPU Inrtallatinn Prncdctrd(Snckdt 468( 1-15 1.6.1 CPU Clnck Frdqtdncy Sdtting(JP4( 1-16 1.6 Jtmodr Sdtting 1.6.1 CPU Fan Cnnndctnrr(FAN1.1.3.4.5.6( 1-16 1.6.1 Wakd-Nn-LAN Hdacdr(WNL( 1-18 1.6.3 AC'96 Cncdc Sdldctinn(J1( 1-19 1.6.4 AGP Vnltagd Acjtrt(JP8( 1-19 1.6.5 CMNS Ftnctinn Sdtting(JP6( 1-19 1.8 DRAM Inrtallatinn 1.8.1 DIMM 1-1/ 1.8.1 Hnw tn inrtall a DIMM Mnctld 1-1/ 1.9 Atcin Staryrtdm 1.9.1 CD-Atcin-IN Cnnndctnr(CDIN1.CDIN1( 1-11 ii

1.9.1 Tdldohnnd in Cnnndctnr(TAD((notinn( (notinn( (notinn( (notinn( (notinn( 1-11 1.1/ Smart Pandl Nnanarc Cnnndctnr 1.1/.1 Pnrt 8/ Ddatg Ftnctinn(SP-J6( 1-13 1.1/.1 Sdcnnc BINS Cnnndctnr(SP-J1( 1-13 1.1/.3 AUX LINE Cnnndctnr(SP-J5( 1-13 1.1/.4 Frnnt CNM1 Hdacdr Cnnndctnr(SP-J6( 1-14 1.1/.5 Frnnt USB3,4 Hdacdr Cnnndctnr(SP-J8( 1-14 1. BINS Sdtto 1. BINS Sdtto 1. BINS Sdtto 1. BINS Sdtto 1. BINS Sdtto 1.1 Main Mdnt 1-4 1.1 Stancarc CMNS Fdattrdr 1-6 1.3 Acuancdc BINS Fdattrdr 1-1/ 1.4 Acuancdc Chiordt Fdattrdr 1-14 1.5 Intdgratdc Pdriohdralr 1-16 1.6 Pnwdr Managdmdnt Sdtto 1-13 1.6 PnP.PCI Cnneigtratinnr 1-16 1.8 PC Hdalth Stattr 1-31 1.9 Frdqtdncy.Vnltagd Cnntrnl 1-33 1.1/ Lnac Fail-Saed Ddeatltr 1-34 1.11 Lnac Notimizdc Ddeatltr 1-35 1.11 Sdt Stodruirnr.trdr Parrwnrc 1-36 1.13 Saud & Exit Sdtto 1-38 1.14 Exit Withntt Sauing 1-39 3. Driudr Inrtallatinn 3. Driudr Inrtallatinn 3. Driudr Inrtallatinn 3. Driudr Inrtallatinn 3. Driudr Inrtallatinn 3.1 Attn-rtn Mdnt 3-1 3.1 Inrtalling Intdline Driudr 3-1 3.3 Inrtalling Ultra ATA Driudr 3-3 3.4 Inrtalling Harcward Mnnitnring Utility 3-4 3.5 Inrtalling Sdctrity Driudr 3-6 3.6 Inrtalling Sntnc Driudr 3-6 a. Aoodncix a. Aoodncix a. Aoodncix a. Aoodncix a. Aoodncix iii

Chaosdr 1 Mnshdranarc Cdrbrhoshnn Chaosdr 1 Mnshdranarc Cdrbrhoshnn Chaosdr 1 Mnshdranarc Cdrbrhoshnn Chaosdr 1 Mnshdranarc Cdrbrhoshnn Introduction System Overview This manual was written to help you start using this product as quickly and smoothly as possbile. Inside, you will find the answers to solve most problems. In order for this reference material to be of greatest use, refer to the “expanded table of contents” to find relevant topics. This board provides a total PC solution by incorporating the System , I/O , and PCI IDE. The mainboard support single Intel P4 processors base PC ATX system, PCI Local Bus, CNR Bus, and AGP Bus to upgrades your system performance. It is ideal for multi-tasking and fully supports MS-DOS, Windows, Windows NT , Windows ME, Windows 2000, Novell, OS/2, Windows95/98, Windows 98SE, Windows XP, UNIX, SCO UNIX etc. This manual also explains how to install the mainboard for operation, and how to setup your CMOS configuration with the BIOS setup program.

Chaosdr 1 Mnshdranarc Cdrbrhoshnn Chaosdr 1 Mnshdranarc Cdrbrhoshnn Chaosdr 1 Mnshdranarc Cdrbrhoshnn Chaosdr 1 Mnshdranarc Cdrbrhoshnn 1.Motherboard Description 1.1 Features 1.1.1 Hardware CPU -400MHz System Interface speed. -Single Socket 478 for Intel P4TM up to 1.8GHz or higher(Northwood Processor). -Support Intel NetburstTM Micro-architecture. Speed -Supports 33MHz PCI Bus speed. -Supports 2X/4X AGP Bus. -Only support AGP 66 MHz/1.5V for 2X/4X device. DRAM Memory -Supports 8/16/32/64....MB DIMM module socket. -Supports Synchronous DRAM(3.3V) -Supports a maximum memory size of 3GB with SDRAM. -Main support for PC-133 Module W/SPD EEPROM, but not ensure support for PC-100 RAM Module . Shadow RAM -A memory controller provide shadow RAM and supports 8-bit ROM BIOS. Bus Slots -Provide one CNR slot and AGP slot. -Five 32-bit PCI bus. BIOS -The mainboard BIOS provides “Plug & Play” BIOS whichdetects the peripheral devices and expansion cards of the board automatically. -The mainboard provides a Desktop Management Interface (DMI) function which records your mainboard specifications. -BIOS support CD-ROM, SCSI, LAN BOOT, Temperature sensor, LAN, Alarm Bus CLK setup with BIOS. 3.3V 3.3V 3.3V 3.3V 3.3V AGP AGP AGP AGP AGP

Chaosdr 1 Mnshdranarc Cdrbrhoshnn Chaosdr 1 Mnshdranarc Cdrbrhoshnn Chaosdr 1 Mnshdranarc Cdrbrhoshnn Chaosdr 1 Mnshdranarc Cdrbrhoshnn Universal Serial Bus -Supports two back Universal Serial Bus(USB)Ports and two front Universal serial Bus(USB)Ports. Hardware Monitor Function -CPU Fan Speed Monitor. -CPU Temperature Monitor. -System Voltage Monitor. Flash Memory -Support 2MB flash memory. -Support ESCD Function. IDE Bulit-in On Board -Supports four IDE devices. -Supports PIO Mode 5, Master Mode, high performance hard disk drives. -Support Ultra DMA 33/66/100 Bus Master Mode. -Supports IDE interface with CD-ROM. -Supports high capacity hard disk drives. -Support LBA mode. PCI-Based AC 97 Digital Audio Processor -AC 97 2.1 interface. -16 channels of high-quality sample rate conversion. -16x8 channel digital mixer. -Stereo 10 band graphic equalizer. -Sound Blaster and Sound Blaster Pro emulation. WOL (Wake On LAN) Supports system power up from LAN ring up . Smart Panel Supports BIOS Port 80H POST Code output to debug LED.

Chaosdr 1 Mnshdranarc Cdrbrhoshnn Chaosdr 1 Mnshdranarc Cdrbrhoshnn Chaosdr 1 Mnshdranarc Cdrbrhoshnn Chaosdr 1 Mnshdranarc Cdrbrhoshnn I/O Bulit-in On Board -Supports one multi-mode Parallel Port. (1)Standard & Bidirection Parallel Port (2)Enhanced Parallel Port (EPP) (3)Extended Capabilities Port -Supports two serial ports, 16550 UART. -Supports one Infrared transmission (IR). -Supports PS/2 mouse and PS/2 Keyboard. -Supports ATX 4 pin power connector +12V in. -Supports 360KB, 720KB, 1.2MB, 1.44MB, and 2.88MB floppy disk drivers. 1.1.2 Software BIOS -AWARD legal BIOS. -Supports APM 1.2. -Supports USB Function. -Supports ACPI Operation System -Supporting the highest performance for MS-DOS,Windows, Windows NT, Windows 2000, Windows ME, Novell, OS/2, Windows 95/98, Windows 98 SE, Windows XP, UNIX, SCO UNIX etc. 1.1.3 Attachments -HDD UDMA66/100 Cable. -FDD Cable. -Flash Memory Written for BIOS Update. -USB2 Cable (Option). -Fully Setup CD Driver built in Utility(Ghost, Anitivirus, Adobe Acrobat). -This Manual.

Chaosdr 1 Mnshdranarc Cdrbrhoshnn Chaosdr 1 Mnshdranarc Cdrbrhoshnn Chaosdr 1 Mnshdranarc Cdrbrhoshnn Chaosdr 1 Mnshdranarc Cdrbrhoshnn 1.2 Motherboard Installation 1.2.1 Motherboard Map

Chaosdr 1 Mnshdranarc Cdrbrhoshnn Chaosdr 1 Mnshdranarc Cdrbrhoshnn Chaosdr 1 Mnshdranarc Cdrbrhoshnn Chaosdr 1 Mnshdranarc Cdrbrhoshnn 1.2.2 Motherboard Layout USB1 COM1 COM2 Printer FAN5 Speak out Line in MIC in GAME1 Intel Intel PANEL FAN3 CNR SLOT AGP SLOT 1 DIMM2 DIMM1 DIMM3 J9 JP7 SP-J6 PCI1 PCI2 PCI3 PCI4 PCI5 FAN1 FAN2 I/O CHIP BIOS FAN4 1 J1 JP3 J2 JP6 JP4 (Only 2X/4X/1.5V Card) S1 FAN6 478 SP-J1

Chaosdr 1 Mnshdranarc Cdrbrhoshnn Chaosdr 1 Mnshdranarc Cdrbrhoshnn Chaosdr 1 Mnshdranarc Cdrbrhoshnn Chaosdr 1 Mnshdranarc Cdrbrhoshnn USB1 COM1 COM2 Printer FAN5 Speak out Line in MIC in GAME1 Intel Intel PANEL FAN3 CNR SLOT AGP SLOT 1 DIMM2 DIMM1 DIMM3 J9 JP7 SP-J6 PCI1 PCI2 PCI3 PCI4 PCI5 FAN1 FAN2 I/O CHIP BIOS FAN4 1 J1 JP3 J2 JP6 JP4 (Only 2X/4X/1.5V Card) S1 FAN6 478 SP-J1 1.3 Motherboard Connectors 7 14 17 13 1.Babk Pandk I.O Cnnndbsnrr 1.Babk Pandk I.O Cnnndbsnrr 1.Babk Pandk I.O Cnnndbsnrr 1.Babk Pandk I.O Cnnndbsnrr 1.Babk Pandk I.O Cnnndbsnrr 1.CC Atchn-In Cnnndbsnr 1.CC Atchn-In Cnnndbsnr 1.CC Atchn-In Cnnndbsnr 1.CC Atchn-In Cnnndbsnr 1.CC Atchn-In Cnnndbsnr 3.IR Cnnndbsnr 3.IR Cnnndbsnr 3.IR Cnnndbsnr 3.IR Cnnndbsnr 3.IR Cnnndbsnr 4.Frnns COM1 Cnnndbsnr 4.Frnns COM1 Cnnndbsnr 4.Frnns COM1 Cnnndbsnr 4.Frnns COM1 Cnnndbsnr 4.Frnns COM1 Cnnndbsnr 5.Wakd-On-LAN Cnnndbsnr 5.Wakd-On-LAN Cnnndbsnr 5.Wakd-On-LAN Cnnndbsnr 5.Wakd-On-LAN Cnnndbsnr 5.Wakd-On-LAN Cnnndbsnr 6.Frnns USB1 Cnnndbsnr 6.Frnns USB1 Cnnndbsnr 6.Frnns USB1 Cnnndbsnr 6.Frnns USB1 Cnnndbsnr 6.Frnns USB1 Cnnndbsnr 7.Frnns Pandk Cnnndbsnr 7.Frnns Pandk Cnnndbsnr 7.Frnns Pandk Cnnndbsnr 7.Frnns Pandk Cnnndbsnr 7.Frnns Pandk Cnnndbsnr 8.Fan Cnnndbsnrr 8.Fan Cnnndbsnrr 8.Fan Cnnndbsnrr 8.Fan Cnnndbsnrr 8.Fan Cnnndbsnrr(Fan1.1.3.4.5.6( (Fan1.1.3.4.5.6( (Fan1.1.3.4.5.6( (Fan1.1.3.4.5.6( (Fan1.1.3.4.5.6( 9.ICD Cnnndbsnrr 9.ICD Cnnndbsnrr 9.ICD Cnnndbsnrr 9.ICD Cnnndbsnrr 9.ICD Cnnndbsnrr 10.Fknooy Cnnndbsnr 10.Fknooy Cnnndbsnr 10.Fknooy Cnnndbsnr 10.Fknooy Cnnndbsnr 10.Fknooy Cnnndbsnr 11.ATX Pnwdr Cnnndbsnr(ATX.J8( 11.ATX Pnwdr Cnnndbsnr(ATX.J8( 11.ATX Pnwdr Cnnndbsnr(ATX.J8( 11.ATX Pnwdr Cnnndbsnr(ATX.J8( 11.ATX Pnwdr Cnnndbsnr(ATX.J8( 11. 11. 11. 11. 11.AC AC AC AC AC’97 97 97 97 97 COCDC Sdkdbshnn(J1( COCDC Sdkdbshnn(J1( COCDC Sdkdbshnn(J1( COCDC Sdkdbshnn(J1( COCDC Sdkdbshnn(J1( 13.CPU Cknbk Frdq. Sdsshng(JP4( 13.CPU Cknbk Frdq. Sdsshng(JP4( 13.CPU Cknbk Frdq. Sdsshng(JP4( 13.CPU Cknbk Frdq. Sdsshng(JP4( 13.CPU Cknbk Frdq. Sdsshng(JP4( 14.AGP Vnksagd Acjtrs(JP8( 14.AGP Vnksagd Acjtrs(JP8( 14.AGP Vnksagd Acjtrs(JP8( 14.AGP Vnksagd Acjtrs(JP8( 14.AGP Vnksagd Acjtrs(JP8( 15.CMOS Ftnbshnn Sdkdbshnn(JP7( 15.CMOS Ftnbshnn Sdkdbshnn(JP7( 15.CMOS Ftnbshnn Sdkdbshnn(JP7( 15.CMOS Ftnbshnn Sdkdbshnn(JP7( 15.CMOS Ftnbshnn Sdkdbshnn(JP7( 16.Tdkdohnnd hn Cnnndbsnr(TAC((noshnn( 16.Tdkdohnnd hn Cnnndbsnr(TAC((noshnn( 16.Tdkdohnnd hn Cnnndbsnr(TAC((noshnn( 16.Tdkdohnnd hn Cnnndbsnr(TAC((noshnn( 16.Tdkdohnnd hn Cnnndbsnr(TAC((noshnn( 17.Slars Pandk Ftnbshnn(SP-J1.SP-J6.SP-J5((noshnn( 17.Slars Pandk Ftnbshnn(SP-J1.SP-J6.SP-J5((noshnn( 17.Slars Pandk Ftnbshnn(SP-J1.SP-J6.SP-J5((noshnn( 17.Slars Pandk Ftnbshnn(SP-J1.SP-J6.SP-J5((noshnn( 17.Slars Pandk Ftnbshnn(SP-J1.SP-J6.SP-J5((noshnn( 1 8 9 4 3 17 11 17 6 11 5 15 10 2 12 16

Chaosdr 1 Mnshdranarc Cdrbrhoshnn Chaosdr 1 Mnshdranarc Cdrbrhoshnn Chaosdr 1 Mnshdranarc Cdrbrhoshnn Chaosdr 1 Mnshdranarc Cdrbrhoshnn 1.3.1 Front Panel Connector (PANEL) PANEL Connector Speaker Connector (SPEAKER) An offboard speaker can be installed onto the motherboard as a manufacturing option. An offboard speaker can be connected to the motherboard at the front pannel connector. The speaker (onboard or offboard) provides error beep code information during the Power Self-Test when the computer cannot use the video interface. The speaker is not connected to the audio subsystem and does not receive output from the audio subsystem. Hard Drive LED Connector (HD_LED) This connector supplies power to the cabinet IDE activity LED. Read and write activity by devices connected to the Primary or Secondary IDE connectors will cause the LED to light up. SMI Suspend Switch Lead (EXTSMI) (Disabled) This allows the user to manually place the system into a suspend mode of Green mode. System activity will be instantly decreased to save electricity and expand the life of certain components when the system is not in use. This 2-pin connector (see the figure) connects to the case-mounted suspend switch. If you do not have a switch for the connector, you may use the "Turbo Switch” instead since it does not have a function. SMI is activated when it detects a short. It may require one or two pushes depending on the position of the switch. Wake-up can be controlled by settings in the BIOS but the keyboard will always allow wake-up (the SMI Suspend Switch Lead cannot wake-up the system). If you want to use this connector, the "Suspend Switch" in the Power Management Setup of the BIOS SOFT- WARE section should be on the default setting of Enable. SPEAKER PW_BN 1 2 RESET EXTSMI HD_LED PW_LED + + + KBLOCK + + + 19 20

Chaosdr 1 Mnshdranarc Cdrbrhoshnn Chaosdr 1 Mnshdranarc Cdrbrhoshnn Chaosdr 1 Mnshdranarc Cdrbrhoshnn Chaosdr 1 Mnshdranarc Cdrbrhoshnn ATX Power Switch (PW_BN) The system power is controlled by a momentary switch connected to this lead. Pushing the button once will switch the system ON. The system power LED lights when the system's power is on . Power LED Lead (PW_LED) The system power LED lights when the system power is on. Keyboard Lock (KBLOCK) The header is for setting keyboard locked. Reset Switch Lead (RESET) The connector can be connected to a momentary SPST type switch that is normally open. When the switch is closed, the motherboard resets and runs the POST. 1.3.2 Floppy Disk Connector (FDC) This connector supports the provided floppy drive ribbon cable. After connecting the single end to the board, connect the two plugs on the other end to the floppy drives. 1.3.3 Hard Disk Connectors (IDE1/IDE2) These connectors support the provided IDE hard disk ribbon cable. After connecting the single end to the board, connect the two plugs at the other end to your hard disk. If you install two hard disks, you must configure the second drive to Slave mode by setting its jumper settings. BIOS now supports SCSI device or IDE CD-ROM boot up (see "HDD Sequence SCSI/IDE First" & "Boot Sequence" in the BIOS Features Setup of the BIOS SOFTWARE) (Pin 20 is removed to prevent inserting in the wrong orientation when using ribbon cables with pin 20 plugged) .

Chaosdr 1 Mnshdranarc Cdrbrhoshnn Chaosdr 1 Mnshdranarc Cdrbrhoshnn Chaosdr 1 Mnshdranarc Cdrbrhoshnn Chaosdr 1 Mnshdranarc Cdrbrhoshnn 1.3.4 ATX 4-pin/20-pin Power Connector (J8/ATX) -This connector supports the power button on-board. Using the ATX power supply, functions such as Modem Ring Wake- Up and Soft Power Off are supported on this motherboard . This power connector supports instant power-on functionality, which means that the system will boot up instantly when the power connector is inserted on the board. -ATX 4-pin power connector only support +12V voltage. Pin Signal Pin Signal 1 3.3V 11 3.3V 2 3.3V 12 -12V 3 GND 13 GND 4 5V 14 PS-ON 5 GND 15 GND 6 5V 16 GND 7 GND 17 GND 8 PW-OK 18 -5V 9 5V_SB 19 5V 10 12V 20 5V Pin J8 Signal Pin J8 Signal 1 GND 2 GND 3 +12V 4 +12V NOTE: If there isn’t ATX 4 pin power connector, you can move L7 to L8, but you must use 350W or higher power supply.

Chaosdr 1 Mnshdranarc Cdrbrhoshnn Chaosdr 1 Mnshdranarc Cdrbrhoshnn Chaosdr 1 Mnshdranarc Cdrbrhoshnn Chaosdr 1 Mnshdranarc Cdrbrhoshnn 1.4 Back Panel Connectors 1.4.1 PS/2 Mouse /Keyboard CONN. The motherboard provides a standard PS/2 mouse / Keyboard mini DIN connector for attaching a PS/2 mouse. You can plug a PS/2 mouse / Keyboard directly into this connector. 1.4.2 USB Connectors: USB1 & USB2 The motherboard provides a OHCI(Open Host Controller Interface)Universal Serial Bus Roots for attaching USB devices such as a keyboard, mouse and other USB devices. You can plug the USB devices directly into this connector. Pin Signal 1 +5V_SB 2 USBP0-(USBP1-) 3 USBP0+(USBP1+) 4 GND PS/2 Keyboard (6-pin Female) Serial Port(9-pin Male) COM1 COM2 SPEAKER MIC LINE IN PS/2 Mouse USB1 Parallel (Printer) Port (25-pin Female) MIDI/(GAME) Port (15-pin Female) USB1 1.3.5 Infrared Connector (IR) After the IrDA interface is configured, files can be transferred from or to portable devices such as laptops, PDAs, and printers using application software.

Chaosdr 1 Mnshdranarc Cdrbrhoshnn Chaosdr 1 Mnshdranarc Cdrbrhoshnn Chaosdr 1 Mnshdranarc Cdrbrhoshnn Chaosdr 1 Mnshdranarc Cdrbrhoshnn USB1 COM1 COM2 Printer FAN5 Speak out Line in MIC in GAME1 Intel Intel PANEL FAN3 CNR SLOT AGP SLOT 1 DIMM2 DIMM1 DIMM3 J9 JP7 SP-J6 PCI1 PCI2 PCI3 PCI4 PCI5 FAN1 FAN2 I/O CHIP BIOS FAN4 1 J1 JP3 J2 JP6 JP4 (Only 2X/4X/1.5V Card) S1 FAN6 478 SP-J1 Front Two USB Connectors: USB2 USB2 1 3 5 7 9 VCC P2- P2+ GND GND 2 4 6 8 10 GND GND P3+ P3- VCC

Chaosdr 1 Mnshdranarc Cdrbrhoshnn Chaosdr 1 Mnshdranarc Cdrbrhoshnn Chaosdr 1 Mnshdranarc Cdrbrhoshnn Chaosdr 1 Mnshdranarc Cdrbrhoshnn 1.5 Serial and Parallel Interface Ports This system comes equipped with two serial ports and one parallel port. Both types of interface ports will be explained in this chapter. The Serial Interfaces: COM1/COM2 The serial interface port is sometimes refered to as an RS- 232 port or an asynchronous communication port. Mice, printers, modems and other peripheral devices can be connected to a serial port. The serial port can also be used to connect your computer system. If you wish to transfer the contents of your hard disk to another system it can be accomplished by using each machine’s serial port. The serial port on this system has one 9-pin connector. Some older computer systems and peripherals used to be equipped with only a 25-pin connector. Should you need to connect your 9-pin serial port to an older 25-pin serial port, you can purchase a 9-to-25 pin adapter. Signal DB9 Pin DB25 Pin DCD 1 8 RX 2 3 TX 3 2 DTR 4 20 GND 5 7 DSR 6 6 RTS 7 4 CTS 8 5 RI 9 22 COM1/COM2 1 COM2

Chaosdr 1 Mnshdranarc Cdrbrhoshnn Chaosdr 1 Mnshdranarc Cdrbrhoshnn Chaosdr 1 Mnshdranarc Cdrbrhoshnn Chaosdr 1 Mnshdranarc Cdrbrhoshnn USB1 COM1 COM2 Printer FAN5 Speak out Line in MIC in GAME1 Intel Intel PANEL FAN3 CNR SLOT AGP SLOT 1 DIMM2 DIMM1 DIMM3 J9 JP7 SP-J6 PCI1 PCI2 PCI3 PCI4 PCI5 FAN1 FAN2 I/O CHIP BIOS FAN4 1 J1 JP3 J2 JP6 JP4 (Only 2X/4X/1.5V Card) S1 FAN6 478 SP-J1 Parallel Interface Port Unlike serial ports, parallel interface ports have been standardized and should not present any difficulty interfacing peripherals to your system. Sometimes called a Centronics port, the parallel port is almost exclusively used with printers. The parallel port on your system has a 25-pin, DB 25 connector(see the picture below). COM2 PS/2 Keyboard (6-pin Female) Serial Port(9-pin Male) COM1 COM2 SPEAKER MIC LINE IN PS/2 Mouse USB1 Parallel (Printer) Port (25-pin Female) MIDI/(GAME) Port (15-pin Female)

Chaosdr 1 Mnshdranarc Cdrbrhoshnn Chaosdr 1 Mnshdranarc Cdrbrhoshnn Chaosdr 1 Mnshdranarc Cdrbrhoshnn Chaosdr 1 Mnshdranarc Cdrbrhoshnn USB1 COM1 COM2 Printer FAN5 Speak out Line in MIC in GAME1 Intel Intel PANEL FAN3 CNR SLOT AGP SLOT 1 DIMM2 DIMM1 DIMM3 J9 JP7 SP-J6 PCI1 PCI2 PCI3 PCI4 PCI5 FAN1 FAN2 I/O CHIP BIOS FAN4 1 J1 JP3 J2 JP6 JP4 (Only 2X/4X/1.5V Card) S1 FAN6 478 SP-J1 1.6 CPU Installation 1.6.1 CPU Installation Procedure: Socket 478 1. Pull the lever sideways away from the socket then raise the lever to a 90-degree angle. 2. Locate Pin 1 in the socket and look for the white dot or cut edge in the CPU. Match Pin 1 with the white dot/cut edge then insert the CPU. 3. Press the lever down to complete the installation. 4. Make sure the spec of the heatsink is good enough. Socket 478 Notch

Chaosdr 1 Mnshdranarc Cdrbrhoshnn Chaosdr 1 Mnshdranarc Cdrbrhoshnn Chaosdr 1 Mnshdranarc Cdrbrhoshnn Chaosdr 1 Mnshdranarc Cdrbrhoshnn USB1 COM1 COM2 Printer FAN5 Speak out Line in MIC in GAME1 Intel Intel PANEL FAN3 CNR SLOT AGP SLOT 1 DIMM2 DIMM1 DIMM3 J9 JP7 SP-J6 PCI1 PCI2 PCI3 PCI4 PCI5 FAN1 FAN2 I/O CHIP BIOS FAN4 1 J1 JP3 J2 JP6 JP4 (Only 2X/4X/1.5V Card) S1 FAN6 478 SP-J1 1.6.2 CPU Clock Frequency Setting: JP4 Overclocking is operating a CPU/Processor beyond its specified frequency. JP4 jumper is used for the CPU Front Side Bus Frequencies from 100MHz to 133MHz. O F F O F F O F F O F F O F F O N O N O N O N O N 1-2 3-4 5-6 7-8 9-10 CPU(MHz) PCI(MHz) ON ON ON ON OFF 100 33.3 OFF ON ON ON OFF Auto Auto

Chaosdr 1 Mnshdranarc Cdrbrhoshnn Chaosdr 1 Mnshdranarc Cdrbrhoshnn Chaosdr 1 Mnshdranarc Cdrbrhoshnn Chaosdr 1 Mnshdranarc Cdrbrhoshnn USB1 COM1 COM2 Printer FAN5 Speak out Line in MIC in GAME1 Intel Intel PANEL FAN3 CNR SLOT AGP SLOT 1 DIMM2 DIMM1 DIMM3 J9 JP7 SP-J6 PCI1 PCI2 PCI3 PCI4 PCI5 FAN1 FAN2 I/O CHIP BIOS FAN4 1 J1 JP3 J2 JP6 JP4 (Only 2X/4X/1.5V Card) S1 FAN6 478 SP-J1 1.7 Jumper Setting A jumper has two or more pins that can be covered by a plastic jumper cap, allowing you to select different system options. 1.7.1 CPU/System Fan Connector: Fan1 Pin Assignment 1 Ground 2 +12VDC 3 FAN1 FAN 3 Connector WOL JP7 1 3 2 FAN 5 Connector FAN4 Connector J2 JP8 FAN 6 Connector FAN 1/2 Connector

Chaosdr 1 Mnshdranarc Cdrbrhoshnn Chaosdr 1 Mnshdranarc Cdrbrhoshnn Chaosdr 1 Mnshdranarc Cdrbrhoshnn Chaosdr 1 Mnshdranarc Cdrbrhoshnn 1.7.1 CPU/System Fan Connector: Fan2 Pin Assignment 1 Ground 2 +12VDC 3 NC 1 3 2 1.7.1 CPU/System Fan Connector: Fan3 Pin Assignment 1 Ground 2 +12VDC 3 FAN2 1 3 2 1.7.1 CPU/System Fan Connector: Fan4/5 Pin Assignment 1 Ground 2 +12VDC 3 NC 1 3 2 1.7.1 CPU/System Fan Connector: Fan6 Pin Assignment 1 Ground 2 +12VDC 3 FAN3 1 3 2 1.7.2 Wake-On LAN Header: WOL Pin Assignment 1 5V_SB 2 Ground 3 Signal 3 1

Chaosdr 1 Mnshdranarc Cdrbrhoshnn Chaosdr 1 Mnshdranarc Cdrbrhoshnn Chaosdr 1 Mnshdranarc Cdrbrhoshnn Chaosdr 1 Mnshdranarc Cdrbrhoshnn 1.7.3 AC’97 CODEC Selection: J2 Pin Assignment 1-2 On board CODEC is used (Default) 2-3 CNR Slot is used 1.7.5 CMOS Function Selection: JP7 Pin Assignment 1-2 Normal (Default) 2-3 Clear CMOS 1.7.4 AGP Voltage Adjust: JP8 O F F O F F O F F O F F O F F O N O N O N O N O N NOTE: (Please follow the procedure below to clear CMOS data.) (1)Remove the AC power line. (2)JP7(2-3)Closed. (3)Wait five seconds. (4)JP7(1-2) Closed. (5)AC Power on. (6)Reset your desired password or clear CMOS data. AGP Voltage Jumper 1-2 3-4 1.5V OFF OFF 1.6V ON OFF 1.65V OFF ON

Chaosdr 1 Mnshdranarc Cdrbrhoshnn Chaosdr 1 Mnshdranarc Cdrbrhoshnn Chaosdr 1 Mnshdranarc Cdrbrhoshnn Chaosdr 1 Mnshdranarc Cdrbrhoshnn 1.8 DRAM Installation 1.8.1 DIMM DRAM Access Time: 3.3V Unbuffered SDRAM PC133 Type required. DRAM Type: 8MB, 16MB, 32MB, 64MB, 128MB, 256MB, 512MB, 1GB DIMM Module.(168 pin) Bank Memory module DIMM 1 32MB, 64MB, 128MB, 256MB, 512MB, 1GB ( Bank 0-1 ) 168 pin, 3.3v SDRAM DIMM 2 32MB, 64MB, 128MB, 256MB, 512MB, 1GB ( Bank 2-3 ) 168 pin, 3.3vSDRAM DIMM 3 32MB, 64MB, 128MB, 256MB, 512MB, 1GB ( Bank 4-5 ) 168 pin, 3.3v SDRAM Total System Memory(Max 3GB) 1.8.2 How to install a DIMM Module 1. The DIMM socket has a “Plastic Safety Tab” and the DIMM memory module has an asymmetrical notch”, so the DIMM memory module can only fit into the slot in one direction. 2. Push the tabs out. Insert the DIMM memory modules into the socket at a 90-degree angle then push down vertically so that it will fit into place. 3. The Mounting Holes and plastic tabs should fit over the edge and hold the DIMM memory modules in place. 168Phn CIMM Snbkds 168Phn CIMM Snbkds 168Phn CIMM Snbkds 168Phn CIMM Snbkds 168Phn CIMM Snbkds 88 pins 60 pins 20 pins

Chaosdr 1 Mnshdranarc Cdrbrhoshnn Chaosdr 1 Mnshdranarc Cdrbrhoshnn Chaosdr 1 Mnshdranarc Cdrbrhoshnn Chaosdr 1 Mnshdranarc Cdrbrhoshnn USB1 COM1 COM2 Printer FAN5 Speak out Line in MIC in GAME1 Intel Intel PANEL FAN3 CNR SLOT AGP SLOT 1 DIMM2 DIMM1 DIMM3 J9 JP7 SP-J6 PCI1 PCI2 PCI3 PCI4 PCI5 FAN1 FAN2 I/O CHIP BIOS FAN4 1 J1 JP3 J2 JP6 JP4 (Only 2X/4X/1.5V Card) S1 FAN6 478 SP-J1 CDIN1 CDIN2 1.9 Audio Subsystem 1.9.1 CD Audio-in Connectors: CDIN1/CDIN2 TAD Pin CDIN2 Assignment 1 CD-L 2 GND 3 GND 4 CD-R Pin CDIN1 Assignment 1 CD-L 2 GND 3 GND 4 CD-R

Chaosdr 1 Mnshdranarc Cdrbrhoshnn Chaosdr 1 Mnshdranarc Cdrbrhoshnn Chaosdr 1 Mnshdranarc Cdrbrhoshnn Chaosdr 1 Mnshdranarc Cdrbrhoshnn USB1 COM1 COM2 Printer FAN5 Speak out Line in MIC in GAME1 Intel Intel PANEL FAN3 CNR SLOT AGP SLOT 1 DIMM2 DIMM1 DIMM3 J9 JP7 SP-J6 PCI1 PCI2 PCI3 PCI4 PCI5 FAN1 FAN2 I/O CHIP BIOS FAN4 1 J1 JP3 J2 JP6 JP4 (Only 2X/4X/1.5V Card) S1 FAN6 478 SP-J1 1.10 Smart Panel Onboard Connector SP-J1 SP-J5 Note: The motherboard provides the pin leads for Smart Panel. If you want POST Error Code or Smart Panel function, please refer to Smart Panel (SPS845A) manual. SP-J6 1.9.2 Telephone in Connector: TAD (option) Pin TAD Assignment 1 PHONE 2 GND 3 GND 4 MONO_OUT COM2

Chaosdr 1 Mnshdranarc Cdrbrhoshnn Chaosdr 1 Mnshdranarc Cdrbrhoshnn Chaosdr 1 Mnshdranarc Cdrbrhoshnn Chaosdr 1 Mnshdranarc Cdrbrhoshnn 1.10.1 Port 80 Debug Function: SP-J6(ERR1) For Smart Panel connector(SP-J6) to M/B (SP-J6). 1.10.2 Second BIOS Connector: SP-J1(JP5) For Smart Panel connector(SP-J1) to M/B (SP-J1). Pin SP-J6 Assignment Pin SP-J6 Assignment 1 ERD4 2 ERD0 3 ERD5 4 ERD1 5 ERD6 6 ERD2 7 ERD7 8 ERD3 9 GND 10 NC Pin SP-J1 Assignment Pin SP-J1 Assignment 1 VCC3 2 +5V 3 PCI_RST# 4 33MHz 5 CLAD0 6 P66DET 7 CLAD1 8 S66DET 9 GND 10 GND 11 CLAD2 12 HINT 13 CLAD3 14 FWH_IDD1 15 CLAD4 16 VCC3 1.10.3 AUX Line Connector: SP-J5(JP2) For Smart Panel connector(SP-J5) to M/B (SP-J5). Pin SP-J5 Assignment Pin SP-J5 Assignment 1 LINE_OUT_L 2 LINE_OUT_R 3 LINE_IN_L 4 LINE_IN_R 5 MIC_IN_L 6 MIC_IN_R

Chaosdr 1 Mnshdranarc Cdrbrhoshnn Chaosdr 1 Mnshdranarc Cdrbrhoshnn Chaosdr 1 Mnshdranarc Cdrbrhoshnn Chaosdr 1 Mnshdranarc Cdrbrhoshnn 1.10.4 Front COM2 Header Conn.: SP-J7(COM2) For Smart Panel connector(SP-J7) to M/B (SP-J7). Pin SP-J7 Assignment Pin SP-J7 Assignment 1 DCD 2 RX 3 TX 4 DTR 5 GND 6 DSR 7 RTS 8 CTS 9 RI 1.10.5 Front USB3,4 Header Conn.: SP-J8(USB2) For Smart Panel connector(SP-J8) to M/B (USB2). Pin SP-J8 Assignment Pin SP-J8 Assignment 1 VCC 2 GND 3 P2- 4 GND 5 P2+ 6 P3+ 7 GND 8 P3- 9 GND 10 VCC

Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp 2. BIOS Setup Introduction This chapter discusses the Award Setup program built into the ROM BIOS. The Setup program allows the user to modify the basic system configuration. This special information is then stored in battery-backed RAM so that it retains the setup information when the power is turned off. The Award BIOS installed in your computer system’s ROM (Read Only Memory)is a custom version of an industry standard BIOS. This means that it supports Intel P4 Processor. The BIOS provides critical low-level support for standard devices such as disk drives and serial and parallel ports. The rest of this manual is intended to guide you through the process of configuring your system using Setup. Plug and Play Support This AWARD BIOS supports the Plug and Play Version 1.0A specification. ESCD(Extended System Configuration Data)write is supported. EPA Green PC Support This AWARD BIOS supports Version 1.03 of the EPA Green PC specification. PCI Bus Support This AWARD BIOS also supports Version 2.1 of the Intel PCI (Peripheral Component Interconnect)local bus specification.

Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp APM Support This AWARD BIOS supports Version 1.1&1.2 of the Advanced Power Management(APM) specification.Power management features are implemented via the System Management Interrupt(SMI). Sleep and Suspend power management modes are supported. Power to the hard disk drives and video monitors can be managed by this AWARD BIOS. DRAM Support SDRAM (Synchronous DRAM) are supported. Support CPU This AWARD BIOS supports the Intel P4 Processor. Using Setup In general, you use the arrow keys to highlight items, press to select, use the and keys to change entries, pressfor help and press to quit. The following table provides more detail about how to navigate in the Setup program by using the keyboard. Note: (BIOS version 1.0 is for reference only. If there is a change in BIOS version, please use the actual version on the BIOS.)

Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Keystroke Function Up arrow Move to previous item Down arrow Move to next item Left arrow Move to the item on the left(menu bar) Right arrow Move to the item on the right(menu bar) Esc Main Menu: Quit without saving changes Submenus: Exit Current page to the next higher level menu Move Enter Move to item you desired PgUp key Increase the numeric value or make changes PgDn key Decrease the numeric value or make changes +Key Increase the numeric value or make changes -Key Decrease the numeric value or make changes Esc Key Main menu-Quit and not save changes into CMOS Status Page Setup Menu and option Page Setup Menu-Exit Current page and return to Main Menu F1 Key General help on Setup navigation keys. F5 Key Load previous values from CMOS F6 Key Load the fail-safe defaults from BIOS default table F7 Key Load the optimized defaults F10 Key Save all the CMOS changes and exit

Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp 2.1 Main Menu Once you enter AWARD BIOS CMOS Set up Utility, the Main Menu will appear on the screen. The Main Menu allows you to select from several setup function. Use the arrow keys to select among the items and press to accept and enter the sub-menu. Standard CMOS Features This setup page includes all the items in standard compatible BIOS. “WARNING” The information about BIOS defaults on manual (Figure 1,2,3,4,5,6,7,8,9,10,11,12,13,14)is just for reference, please refer to the BIOS installed on the board for updated information. ◎ ◎ ◎ ◎ ◎Figure 1. Main Menu CMOS Setup Utility-Copyright (C) 1984-2001 Award Software Standard CMOS Features Frequency/Voltage Control Advanced BIOS Features Load Fail-Safe Defaults Advanced Chipset Features Load Optimized Defaults Integrated Peripherals Set Supervisor Password Power Management Setup Set User Password PNP/PCI Configurations Save & Exit Setup PC Health Status Exit Without Saving Esc : Quit F9 : Menu in BIOS ←→↑↓: Select Item F10 : Save & Exit Setup Time , Date , Hard Disk Type ...

Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Advanced BIOS Features This setup page includes all the items of the BIOS special enchanced features. Advanced Chipset Features This setup page includes all the items of the Chipset special enchanced features. Integrated Peripherals This selection page includes all the items of the IDE hard drive and Programmed Input/Output features. Power Management Setup This setup page includes all the items of the power manage ment features. PnP/PCI Configurations This setup page includes the user defined or default IRQ Setting. PC Health Status This page shows the hardware Monitor information of the system. Frequency / Voltage Control This setup page controls the CPU's clock and frequency ratio. Load Fail-Safe Defaults Use this menu to load the BIOS default values for the minimal/stable performance for your system to operate.

Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Load Optimized Defaults These settings are more likely to configure a workable computer when something is wrong. If you cannot boot the computer successfully, select the BIOS Setup options and try to diagnose the problem after the computer boots. These settings do not provide optional performance. Set Supervisor Password Change, set, or, disable password. It allows you to limit accessto the system and Setup, or just to Setup. Set User Password You can specify both a User and a Supervisor password. When you select either password option, you are prompted for a 1-6 character password. Enter the password and then retype the password when prompted. Save & Exit Setup Save CMOS value changes to CMOS and exit setup. Exit Without Saving Abandon all CMOS value changes and exit setup.

Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp 2.2 Standard CMOS Features This item in the Standard CMOS Setup Menu is divided into 10 categories. Each category includes no, one or more than one setup items. Use the arrow keys to highlight the item and then use the or keys to select the value you want in each item. ◎ ◎ ◎ ◎ ◎Figure 2. Standard CMOS Features CMOS Setup Utility-Copyright (C) 1984-2001 Award Software Standard CMOS Features Date(mm:dd:yy) Tue,Jun 6 2000 Item Help Time (hh:mm:ss) 11:26:10 Menu Level IDE Primary Master None IDE Primary Slave Change the day, IDE Secondary Master month,year IDE Secondary Master None and century. Drive A 1.44M,3.5 in Drive B None Video EGA/VGA Halt On All,But Keyboard Base Memory 640K Extended Memory 65472K Total 1024K ←→↑↓: Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults

Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Main Menu Selections This table shows the selections that you can make on the Main Menu. Item Options Description Date Month DD YYYY Set the system,date. Note that the ‘Day’ automatically changes when you set the data. IDE Primary Options are in its sub Press to enter the sub menu Master menu. of detailed. IDE Primary Options are in its sub Press to enter the sub menu Slave menu. of detailed. IDE Secondary Options are in its sub Press to enter the sub menu Master menu. of detailed. IDE Secondary Options are in its sub Press to enter the sub menu Slave menu. of detailed. Drive A None Select the type of floppy disk drive Drive B 360K,5.25in installed in your system. 1.2M,5.25in 720K,3.5in 1.44M,3.5in 2.88M,3.5in Video EGA/VGA Select the default video device. CGA 40 CGA 80 MONO

Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Item Options Description Halt On All Errors Select the situation in which you No Errors want the BIOS to stop the POST All, but Keyboard process and notify. All, but Diskette All, but Disk/Key Base Memory N/A Displays the amount of conventional memory detected during boot up. Extended N/A Displays the amount of conventional Memory memory detected during boot up. Total N/A Displays the total memory Memory available in the system. CMOS Setup Utility-Copyright (C) 1984-2001Award Software IDE Primary Master IDE HDD Auto-Detection Press Enter Item Help IDE Primary Master Auto Access Mode Auto Menu Level Capacity 13022MB Cylinder 25232 Head 16 Precomp 0 Landing Zone 25231 Sector 61 ←→↑↓: Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults

Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp 2.3 Advanced BIOS Features ◎ ◎ ◎ ◎ ◎Figure 3. Advanced BIOS Features CMOS Setup Utility-Copyright (C) 1984-2001 Award Software Advanced BIOS Features Virus Warning This option allows you to choose the VIRUS Warning feature for IDE Hard Disk boot sector protection. If this function is enabled and someone attempts to write data into this area, BIOS will show a warning message on screen and alarm beep. The Choices: Disabled(default), Enabled. Virus Warning Disabled Item Help CPU L1 & L2 Cache Enabled Quick Power On Self Test Enabled Menu Level First Boot Device Floopy Second Boot Device HDD-0 Allows you to Third Boot Device LS120 choose the Boot Other Device Enabled VIRUS warning Swap Floppy Drive Disabled feature for IDE Boot Up Floppy Seek Enabled Hard Disk boot Boot Up NumLock Status On sector protection. Gate A20 Option Fast If this function Typematic Rate Setting Disabled is enabled and Typematic Rate (Chars/Sec) 6 someone attempts Typematic Delay (Msec) 250 to write data into Security Option Setup this area,BIOS APIC Mode Enabled will show a MPS Version Control For OS 1.4 warning message OS Select For DRAM >64MB Non-OS2 on screen and Report No FDD For WIN 95 No alarm beep Small Logo(EPA) Show Enabled ←→↑↓: Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults

Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp CPU L1 & L2 Cache This fields allow you to Enable or Disable the CPU’s “Level 1 & Level 2” cache. Caching allows better performance. Enabled (default) Enabled cache. Disabled Disabled cache. Quick Power On Self Test This category speeds up Power on self-Test(POST) after you power up the computer. If it is set to Enable, BIOS will shorten or skip some check items during POST. Enabled (default) Enabled quick POST. Disabled Normal POST. First/Secondary/Third Boot Device This BIOS attempts to load the operating system from the devices in the sequence selected in these items. The Choices: Floppy, LS120, HDD-0, SCSI, CDROM, HDD-1, HDD-2, HDD-3, ZIP100, USB-FDD, USB-ZIP, USB-CDROM, USB-HDD, LAN, Disabled. Boot Other Device The Choices: Enabled(default), Disabled. Swap Floppy Drive If the system has two floppy drives, you can swap the logical drive name assignments. The Choices: Disabled(default), Enabled. Boot Up Floppy Seek Seek disk drives during boot up. Disabled speeds boot-up. The Choices: Enabled(default), Disabled.

Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Boot Up NumLock Status Select power on state for Numlock. On (default) Numpad is number keys. Off Numpad is arrow keys. Gate A20 Option Select if chipset or keyboard controller should control Gate A20. Normal A pin in the keyboard controller controls Gate A20. Fast (default) Lets chipset control Gate A20. Typematic Rate Setting Enabled Enabled this option to adjust the keystroke repeat rate. Disabled (default) Disabled. Typematic Rate (Char/Sec) Range between 6(default) and 30 characters per second. This option controls the speed of repeating keystrokes. Typematic Delay (Msec) This option sets the time interval for displaying the first and the second characters. The Choices: 250(default), 500, 750, 1000. Security Option This category allows you to limit access to the system and Setup,or just to Setup. System The system will not boot and access to Setup will be denied if the correct password is not entered in prompt.

Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Setup (default) The system will boot, but access to Setup will be denied if the correct password is not entered in prompt. APIC Mode The Choices: Enabled(default), Disabled. MPS Version Control For OS The Choices: 1.4(default), 1.1. OS Select For DRAM >64MB Select the operating system that is running with greater than 64MB of RAM on the system. The Choices: Non-OS2(default), OS2 Report No FDD For Window 95 No (default) Assign IRQ6 For FDD. Yes FDD Detect IRQ6 Automatically. Small Logo(EPA) Show The Choices: Enabled(default), Disabled.

Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp ◎ ◎ ◎ ◎ ◎Figure 4. Advanced Chipset Features CMOS Setup Utility-Copyright(C) 1984-2001 Award Software Advanced Chipset Features 2.4 Advanced Chipset Features This section allows you to configure the system based on the specific features of the installed chipset. This chipset manages bus speeds and access to system memory resources, such as DRAM and external cache. It also coordinates communications of the PCI bus. It must be stated that these items should never need to be altered. The default settings have been chosen because they provide the best operating conditions for your system. The only time you might consider making any changes would be if you discovered that data was lost while using your system. DRAM Timing Selectable By SPD Item Help DRAM Latency Time 1.5 Active to Precharge Delay 7 Menu Level DRAM RAS# to CAS# Delay 3 DRAM RAS# Precharge 3 DRAM Data Integrity Mode Non-ECC Memory Frequency For Auto DRAM Read Thermal Mgnt Enabled System BIOS Cacheable Disabled Video BIOS Cacheable Disabled Video RAM Cacheable Disabled Memory Hole At 15M-16M Disabled Delayed Transaction Enabled AGP Aperture Size (MB) 64 Delay Prior to Thermal 16 Min ←→↑↓: Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults DRAM Timing Selectable The DRAM timing is controlled by the DRAM Timing Registers. The Timings programmed into this register are dependent on the system design. The Choices: By SPD(default), Manual.

Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp DRAM Latency Time 1.5 (default) Set DRAM latency Time to 1.5. 2 Set DRAM latency Time to 2. 3 Set DRAM latency Time to 3. Active to Precharge Delay 7 (default) Set DRAM Precharge Delay in 7. 6 Set DRAM Precharge Delay in 6. 5 Set DRAM Precharge Delay in 5. DRAM RAS# to CAS# Delay 3 (default) Set DRAM RAS# to CAS# delay 3 SCLKs. 2 Set DRAM RAS# to CAS# delay 2 SCLKs. DRAM RAS# Precharge 3 (default) Set DRAM RAS# Precharge Time to 3. 2 Set DRAM RAS# Precharge Time to 2. DRAM Data Integrity Mode The Choices: Non-ECC(default), ECC. Memory Frequency For This option is supprot momory frequency auto detect. The Choices: Auto(default), Diabled. DRAM Read Thermal Mgnt This option is supprot momory read thermal management. The Choices: Enabled(default), Disabled.

Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp System BIOS Cacheable When enabled, the access to the system BIOS ROM address at F0000H-FFFFFFH is cached. The Choices: Disabled(default), Enabled. Video BIOS Cacheable Enabled Enabled Video BIOS Cacheable. Disabled (default) Disabled Video BIOS Cacheable. Video RAM Cacheable Enabled Enabled Video RAM Cacheable. Disabled (default) Disabled Video RAM Cacheable. Memory Hole At 15-16M In order to improve performace, certain space in memory can be reserved for ISA cards. This memory must be mapped into the memory's space below 16MB. The Choices: Disabled(default), Enabled. Delayed Transaction Enabled (default) Slow speed ISA device in system. Disabled Disabled. AGP Aperture Size (MB) 64 (default) AGP Graphics Aperture Size is 64 MB. 32 AGP Graphics Aperture Size is 32 MB. Delay Prior to Thermal The Choices: 16 min(default), 4min, 8min, 32min.

Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp 2.5 Integrated Peripherals ◎ ◎ ◎ ◎ ◎Figure 5. Integrated Peripherals CMOS Setup Utility-Copyright (C) 1984-2001 Award Software Integrated Peripherals On-Chip Primary PCI IDE Enabled Item Help IDE Primary Master PIO Auto IDE Primary Slave PIO Auto Menu Level IDE Primary Master UDMA Auto IDE Primary Slave UDMA Auto On-Chip Secondary PCI IDE Enabled IDE Secondary Master PIO Auto IDE Secondary Slave PIO Auto IDE Secondary Master UDMA Auto IDE Secondary Slave UDMA Auto USB Controller Enabled USB Keyboard Support Disabled USB Mouse Support Disabled AC97 Audio Auto AC97 Modem Auto Init Display First AGP IDE HDD Block Mode Enabled Power On Function Button Only KB Power On Password Enter Hot Key Power On Ctrl-F1 Onboard FDC Controller Enabled Onboard Serial Port 1 3F8/IRQ4 Onboard Serial Port 2 2F8/IRQ3 UART Mode Select Normal RxD,TxD Active Hi,Lo IR Transmission Delay Enabled UR2 Duplex Mode Half Use IR Pins IR/Rx2Tx2 Onboard Parallel Port 378/IRQ7 Parallel Port Mode SPP EPP Mode Type EPP1.7 ECP Mode Use DMA 3 PWRON After PWR-Fail Off Game Port Address 201 Midi Port Adress 330 Midi Port IRQ 10 ←→↑↓: Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults On-Chip Primary PCI IDE Enabled (default) Enabled onboard 1st channel IDE port. Disabled Disabled onboard 1st channel IDE port.

Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp IDE Primary Master PIO(for onboard IDE 1st channel) Auto (default) BIOS will automatically detect the IDE HDD Accessing mode. Mode 0~5 Manually set the IDE Accessing mode. IDE Primary Slave PIO(for onboard IDE 2nd channel) Auto (default) BIOS will automatically detect the IDE HDD Accessing mode. Mode 0~5 Manually set the IDE Accessing mode. IDE Primary Master UDMA Auto (default) BIOS will automatically detect the IDE HDD Accessing mode. Disabled Disabled. IDE Primary Slave UDMA Auto (default) BIOS will automatically detect the IDE HDD Accessing mode. Disabled Disabled. On-Chip Secondary PCI IDE Enabled (default) Enabled onboard 2nd channel IDE port. Disabled Disabled onboard 2nd channel IDE port. IDE Secondary Master PIO(for onboard IDE 1st channel) Auto (default) BIOS will automatically detect the IDE HDD Accessing mode. Mode 0~5 Manually set the IDE Accessing mode. IDE Secondary Slave PIO(for onboard IDE 2nd channel) Auto (default) BIOS will automatically detect the IDE HDD Accessing mode. Mode 0~5 Manually set the IDE Accessing mode.

Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp IDE Secondary Master UDMA Auto (default) BIOS will automatically detect the IDE HDD Accessing mode. Disabled Disabled. IDE Secondary Slave UDMA Auto (default) BIOS will automatically detect the IDE HDD Accessing mode. Disabled Disabled. USB Controller Enabled (default) Enabled USB Controller. Disabled Disabled USB Controller. USB Keyboard Support Enabled Enabled USB Keyboard Support. Disabled (default) Disabled USB Keyboard Support. USB Mouse Support Enabled Enabled USB Mouse Support. Disabled (default) Disabled USB Mouse Support. AC 97 Audio Auto(default) BIOS will automatically detect onboard Audio. Disabled Disabled. AC 97 Modem Auto(default) BIOS will automatically detect onboard Modem. Disabled Disabled.

Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Init Display First PCI Slot Set Init Display First to PCI Slot. AGP (default) Set Init Display First to onboard AGP. IDE HDD Block Mode Enabled (default) Enabled IDE HDD Block Mode. Disabled Disabled IDE HDD Block Mode. Power On Function Password Enter from 1 to 7 characters to set the Keyboard Power On Password. Hot Key Hot Key. Mouse Left Mouse Left. Mouse Right Mouse Right. Any Key Any Key. Button Only (default) Button Only. Keyboard 98 If your keyboard has an Owner key button, you can press the key to power on your system. KB Power On Password Enter Enter from 1 to 7 characters to set the keyboard Power On Password. Hot Key Power On First you must choose the Ctrl-F1 (default) Power On by Hot Key function Ctrl-F2 then Enter from 1 to 8 Ctrl-F3 characters to set the Hot Key Ctrl-F4 Power On your system. Ctrl-F5 Ctrl-F6 Ctrl-F7 Ctrl-F8

Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Onboard FDC Controller Enabled (default) Enabled onboard FDC Controller. Disabled Disabled onboard FDC Controller. Onboard Serial Port1 Select an address and corresponding interrupt for the first and second serial ports. The Choices: 3F8/IRQ4(default), Auto, (2F8/IRQ3), (3E8/IRQ4), (2E8/IRQ3), Disabled. Onboard Serial Port 2 Auto BIOS will automatically setup the Serial Port 2 address. 3F8/IRQ4 Enabled onboard Serial Port 2 and address is 3F8. 2F8/IRQ3 (default) Enabled onboard Serial Port 2 and address is 2F8. 3E8/IRQ4 Enabled onboard Serial Port 2 and address is 3E8. 2E8/IRQ3 Enabled onboard Serial Port 2 and address is 2E8. Disabled Disabled. UART Mode Select This item allows you to select which Infra Red(IR) function of the onboard I/O chip you wish to use. The Choices: Normal(default), IrDA, SCR, ASKIR. UR2 Duplex Mode This item allows you to select which Infra Red(IR) function of the onboard I/O chip you wish to use. The Choices: Half (default), Full. ECP Mode Use DMA The Choices: 3(default), 1.

Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Onboard Parallel Port This item allows you to select the I/O address with which to access the onboard parallel port controller. Disabled. 378/IRQ7. (default) 278/IRQ5. 3BC/IRQ7. Parallel Port Mode SPP (default) Using Parallel port as Standard Parallel Port. EPP Using Parallel port as Ex- hanced Parallel Port. ECP Using Parallel port as Ex- tended Capabilites Port. ECP/EPP Using Parallel port as ECP/EPP mode. PWRON After PWR-Fail This option will determine how the system will power on after a power failure. The Choices: Off(default), On, Former-Str. Game Port Address) 201 (default) Set onboard game port to 201. 209 Set onboard game port to 209. Disabled Disabled. Midi Port Address 290 Set Midi Port address to 290. 300 Set Midi Port address to 300. 330 (default) Set Midi Port address to 330. Disabled Disabled. Midi Port IRQ 10 (default) Set Midi Port IRQ to 10. 5 Set Midi Port IRQ to 5.

Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp 2.6 Power Management Setup The Power Management Setup allows you to configure your system to most effectively save energy while operating in a manner consistent with your own style of computer use. ◎ ◎ ◎ ◎ ◎Figure 6. Power Management Setup CMOS Setup Utility-Copyright (C) 1984-2001 Award Software Power Management Setup ACPI Function Enabled Item Help ACPI Suspend Type S1(POS) Power Management User Define Menu Level Video Off Method DPMS Video Off In Suspend Yes Suspend Type Stop Grant Modem Use IRQ 3 Suspend Mode Disabled HDD Power Down Disabled Soft-Off by PWR-BTTN Instant-Off CPU THER-Throttling 50.0% Wake Up On LAN/PCI Disabled Power On by Ring Disabled Wake Up On RI# Disabled USB KB Wake-up From S3 Disabled Resume by Alarm Disabled Data (of Month) Alarm 0 Time (of hh:mm:ss) Alarm 0 0 0 **Reload Global Timer Events ** Primary IDE 0 Disabled Primary IDE 1 Disabled Secondary IDE 0 Disabled Secondary IDE 1 Disabled FDD,COM,LPT Port Disabled PCI PIRQ[A-D]# Disabled ←→↑↓: Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults ACPI Function This item display status of the Advanced Configuration and Power Management (ACPI). ACPI Suspend Type The item allows you to select the suspend type under ACPI operating system. S1(POS) (default) Power on Suspend. S3(STR) Suspend to RAM.

Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Power Management This option allows you to set each mode individually. When not disabled, each of the ranges are from 1 min. to 1 hr. except for HDD Power Down which ranges from 1 min. to 15 min. and disable. The Choices: User Define (default), Min Saving, Max Saving. Video Off Method This determines the manner in which the monitor is blanked. V/H SYNC+Blank This selection will cause the system to turn off the vertical and horizontal synchronization ports and write blanks to the video buffer. Blank Screen This option only writes blanks to the video buffer. DPMS Support Initial display power (default) management signaling. Video Off In Suspend This field determines when to activate the video off feature for monitor power management. The Choices: Yes(default), No. Suspend Type Stop Grant (default) Set Susped type is stop grant. PwrOn Suspend Set Suspend type is Power on Suspend. Modem Use IRQ This determines the IRQ, which can be applied in Modem use. 3 (default) 4/5/7/9/10/11/NA.

Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Suspend Mode Disabled (default) Disabled. 1 min - 1 Hour Set the timer to enter Suspend Mode. HDD Power Down By default, this is “Disabled”, meaning that no matter the mode of the rest of system, the hard drive will remain ready. Otherwise, you have a range of choices from 1 to 15 minutes or Suspend. This means that you can select to have your hard disk drive be turned off after a selected number of minutes or when the rest or the system goes into a suspend mode. Disabled (default) Disabled. 1 - 15 mins Enabled. Soft-Off by PWR-BTTN Pressing the power button for more than 4 seconds forces the system to enter the Soft-Off state when the system has “hung”. The Choices: Instant-Off(default), Delay 4 Sec. Wake Up On PCI/LAN Enabled Enabled. Disabled (default) Disabled. Power On By Ring Enabled Enabled. Disabled (default) Disabled. Wake Up On RI# Enabled Enabled. Disabled (default) Disabled.

Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp USB KB Wake-Up From S3 Disabled (default) Disabled. Enabled Enabled. CPU THRM-Throttling 50.0% (default) Monitor CPU Temp. will cause system to slow down CPU Duty Cycle to 12.5% / 25.0% / 37.5% / 62.5% / 70.5% / 87.5% Resume by Alarm Disabled (default) Disabled. Enabled Enabled. Primary IDE 0/1 Disabled (default) Disabled. Enabled Enabled monitor Primary IDE 0/1 for Green event. Secondary IDE 0/1 Disabled (default) Disabled. Enabled Enabled monitor Secondary IDE 0/1 for Green event. FDD, COM, LPT Port Disabled (default) Disabled. Enabled Enabled monitor FDD, COM, LPT Port. PCI PIRQ[A-D]# Disabled (default) Ignore PCI PIRQ[A-D]# Active. Enabled Monitor PCI PIRQ[A-D]# Active.

Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp 2.7 PnP/PCI Configurations This section describes configuring the PCI bus system. PCI or Personal Computer Interconnect,is a system which allows I/O devices to operate at speeds nearing the speed of the CPU itself when communicating with its own special components. This section covers some very technical items and it is strongly recommended that only experienced uses make any changes to the default settings. ◎ ◎ ◎ ◎ ◎Figure 7. PnP/PCI Configurations CMOS Setup Utility-Copyright (C) 1984-2001 Award Software PnP/PCI Configurations Reset Configuration Data Disabled Item Help Resources Controlled By Auto(ESCD) IRQ Resources Press Enter Menu Level PCI/VGA Palette Snoop Disabled When resources Assign IRQ For USB Enabled are controlled manually, assign each system interrupt a type, depending on the type of device using the interrupt ←→↑↓: Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults

Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Reset Configuration Data The system BIOS supports the PnP feature so the system needs to record which resource is assigned and proceeds resources from conflict. Every peripheral device has a node, which is called ESCD. This node records which resources are assigned to it. The system needs to record and update ESCD to the memory locations. These locations (4K) are reserved at the system BIOS. If Disabled (Default) is chosen, the system’s ESCD will update only when the new configuration varies from the last one. If Enabled is chosen, the system is forced to update ESCDs and then is automatically set to the “Disabled” mode. IRQ3 assigned to:PCI/ISA PnP IRQ4 assigned to:PCI/ISA PnP IRQ5 assigned to:PCI/ISA PnP IRQ6 assigned to:PCI/ISA PnP IRQ7 assigned to:PCI/ISA PnP IRQ8 assigned to:PCI/ISA PnP IRQ9 assigned to:PCI/ISA PnP IRQ10 assigned to:PCI/ISA PnP IRQ11 assigned to:PCI/ISA PnP IRQ12 assigned to:PCI/ISA PnP IRQ13 assigned to:PCI/ISA PnP IRQ14 assigned to:PCI/ISA PnP IRQ15 assigned to:PCI/ISA PnP DMA-0 assigned to:PCI/ISA PnP DMA-1 assigned to:PCI/ISA PnP DMA-2 assigned to:PCI/ISA PnP DMA-3 assigned to:PCI/ISA PnP DMA-4 assigned to:PCI/ISA PnP DMA-5 assigned to:PCI/ISA PnP DMA-6 assigned to:PCI/ISA PnP DMA-7 assigned to:PCI/ISA PnP

Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp The above settings will be shown on the screen only if “Manual” is chosen for the resources controlled by function. Legacy is the term, which signifies that a resource is assigned to the ISA Bus and provides for non-PnP ISA add-on cards. PCI/ISA PnP signifies that a resource is assigned to the PCI Bus or provides for ISA PnP add-on cards and peripherals. Resources Controlled By By Choosing “Auto” (default), the system BIOS will detect the system resources and automatically assign the relative IRQ and DMA channel for each peripheral. By Choosing “Manual”, the user will need to assign IRQ & DMA for add-on cards. Be sure that there are no IRQ/DMA and I/O port conflicts. IRQ Resources When resources are controlled manually, assign each system interrupt a type, depending on the type of device using the interrupt.

Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp PCI / VGA Palette Snoop Choose Disabled or Enabled. Some graphic controllers which are not VGA compatible take the output from a VGA controller and map it to their display as a way to provide boot information and VGA compatibility. However, the color information coming from the VGA controller is drawn from the palette table inside the VGA controller to generate the proper colors, and the graphic controller needs to know what is in the palette of the VGA controller. To do this, the non-VGA graphic controller watches for the write access to the VGA palette and registers the snoop data. In PCI based systems, the Write Access to the palette will not show up on the ISA bus if the PCI VGA controller responds to the Write. In this case, the PCI VGA controller should not respond to the Write, it should only snoop the data and permit the access to be forwarded to the ISA bus. The non-VGA ISA graphic controller can then snoop the data on the ISA bus. Unless you have the above situation, you should disable this option. Disabled (default) Function Disabled. Enabled Function Enabled. Assign IRQ For USB Lets the user choose which IRQ to assign for the USB.

Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp 2.8 PC Health Status ◎ ◎ ◎ ◎ ◎Figure 8. PC Health Status CMOS Setup Utility-Copyright (C) 1984-2001 Award Software PC Health Status CPU Warning Temperature Disabled Item Help Current System Temp. Current CPU1 Temperature Current CPU2 Temperature Current SystemFan Speed Current CPUFan Speed Current ChssisFan Speed Vcore VCC3 +5V +12V -12V -5V VBAT(V) 5VSB(V) Shut down Temperature Disabled ←→↑↓: Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults Current Voltage(V) Vcore /VCC3/+-12V/+-5V/5VSB/VBAT Detect system’s voltage status automatically. Current CPU1/CPU2/System Temperature(((((℃ ℃ ℃ ℃ ℃/////℉ ℉ ℉ ℉ ℉((((( This field displays the current CPU temperature,if your computer contains a monitoring system. Current ChssisFan/CPUFan / SystemFan Speed These field displays the current speed of up to System Fans,if your computer contains a monitoring system.

Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp CPU Warning Temperature(℃ ℃ ℃ ℃ ℃) Disabled (default) Disabled. 50℃ ℃ ℃ ℃ ℃/////122℉ ℉ ℉ ℉ ℉ Monitor CPU Temp.at 50℃/ 122℉. 53℃ ℃ ℃ ℃ ℃/////127℉ ℉ ℉ ℉ ℉ Monitor CPU Temp.at 53℃/ 127℉. 56℃ ℃ ℃ ℃ ℃///// 133℉ ℉ ℉ ℉ ℉ Monitor CPU Temp.at 56℃/ 133℉ 63℃ ℃ ℃ ℃ ℃///// 145℉ ℉ ℉ ℉ ℉ Monitor CPU Temp.at 63℃/ 145℉ 66℃ ℃ ℃ ℃ ℃///// 151℉ ℉ ℉ ℉ ℉ Monitor CPU Temp.at 66℃/ 151℉ 70℃ ℃ ℃ ℃ ℃///// 158℉ ℉ ℉ ℉ ℉ Monitor CPU Temp.at 70℃/ 158℉ Shutdown Temperature(℃ ℃ ℃ ℃ ℃/////℉ ℉ ℉ ℉ ℉) Disabled (default) Disabled. 60℃ ℃ ℃ ℃ ℃///// 140℉ ℉ ℉ ℉ ℉ Monitor CPU Temp.at 60℃/ 140℉, if Temp.>60℃/140℉ system will automatically power off. 65℃ ℃ ℃ ℃ ℃///// 149℉ ℉ ℉ ℉ ℉ Monitor CPU Temp.at 65℃/ 149℉, if Temp.>65℃/149℉ system will automatically power off. 70℃ ℃ ℃ ℃ ℃///// 158℉ ℉ ℉ ℉ ℉ Monitor CPU Temp.at 70℃/ 158℉, if Temp.>70℃/158℉ system will automatically power off. 75℃ ℃ ℃ ℃ ℃///// 167℉ ℉ ℉ ℉ ℉ Monitor CPU Temp.at 75℃/ 167℉, if Temp.>75℃/167℉ system will automatically power off.

Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp 2.9 Frequency / Voltage Control ◎ ◎ ◎ ◎ ◎Figure 9. Frequency / Voltage Control CMOS Setup Utility-Copyright (C) 1984-2001 Award Software Frequency / Voltage Control CPU Vcore Select Default Item Help CPU Clock Ratio X23 Auto Detect PCI CLK Enabled Menu Level Spread Spectrum Disabled CPU Host / 3V66 / PCI Clock Default ←→↑↓: Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults CPU Vcore Select This option is support CPU vcore select. The Choices: +0.025V~+0.275V, -0.025V~-0.100V CPU Clock Ratio This option will not be shown if you are using a CPU with the locked ratio. X8~X24. Auto Detect PCI CLK This item allows you to enable/disable auto detect DIMM / PCI CLOCK. The Choices: Enabled(default), Disabled. Spread Spectrum This function is designed for the EMI test only. The Choices: Disabled(default), Enabled. CPU Host / 3V66 / PCI Clock This item allows you to select the CPU Host Clock (CPU/ PCI). The Choices: 100/66/33MHz, 103/69/34MHz, 105/70/ 35MHz, 107/71/36MHz, 109/73/36MHz, 111/74/37MHz, 114/76/38MHz, 117/78/39MHz, 120/80/40MHz, 127/85/42MHz, 130/87/43MHz.

Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp 2.10 Load Fail-Safe Defaults When you press on this item, you get a confirmation dialog box with a message similar to: ◎ ◎ ◎ ◎ ◎Figure 10. Load Fail-Safe Defaults CMOS Setup Utility-Copyright (C) 1984-2001 Award Software Standard CMOS Features Frequency/Voltage Control Advanced BIOS Features Load Fail-Safe Defaults Advanced Chipset Features Load Optimized Defaults Integrated Peripherals Set Supervisor Password Power Management Setup Set User Password PNP/PCI Configuration Save & Exit Setup PC Health Status Exit Without Saving Esc : Quit F9 : Menu in BIOS ←→↑↓: Select Item F10 : Save & Exit Setup Time , Date , Hard Disk Type ... Load Fail-Safe Default (Y/N)? N Pressing ‘Y’ loads the default values that are factory settings for optimal performance of system operations.

Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp 2.11 Load Optimized Defaults When you press on this item, you get a confirmation dialog box with a message similar to: ◎ ◎ ◎ ◎ ◎Figure 11. Load Optimized Defaults CMOS Setup Utility-Copyright (C) 1984-2001 Award Software Standard CMOS Features Frequency/Voltage Control Advanced BIOS Features Load Fail-Safe Defaults Advanced Chipset Features Load Optimized Defaults Integrated Peripherals Set Supervisor Password Power Management Setup Set User Password PNP/PCI Configuration Save & Exit Setup PC Health Status Exit Without Saving Esc : Quit F9 : Menu in BIOS ←→↑↓: Select Item F10 : Save & Exit Setup Time , Date , Hard Disk Type ... Load Optimized Default (Y/N)? N Pressing ‘Y’ loads the default values that are factory settings for optimal performance of system operations.

Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp 2.12 Set Supervisor / User Password ◎ ◎ ◎ ◎ ◎Figure 12. Set Supervisor / User Password CMOS Setup Utility-Copyright (C) 1984-2001 Award Software Standard CMOS Features Frequency/Voltage Control Advanced BIOS Features Load Fail-Safe Defaults Advanced Chipset Features Load Optimized Defaults Integrated Peripherals Set Supervisor Password Power Management Setup Set User Password PNP/PCI Configuration Save & Exit Setup PC Health Status Exit Without Saving Esc : Quit F9 : Menu in BIOS ←→↑↓: Select Item F10 : Save & Exit Setup Time , Date , Hard Disk Type ... Enter Password: When you select this function, the following message will appear at the center of the screen to assist you in creating a password. Enter Password Type a password, up to eight characters, and press . The password you type now will clear any previously entered password from CMOS memory. You will be asked to confirm the password. Type the password again and press . You may also press to abort the selection and not enter a password. To disable the password, just press when you are prompted to enter a password. A message will confirm that you wish to disable the password. Once the password is disabled, the system will boot and you can enter setup freely.

Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Password Disabled If you select “System” at the Security Option of BIOS Features Setup Menu, you will be prompted for the password every time when the system is rebooted, or any time when you try to enter Setup. If you select “Setup” at the Security Option of BIOS Features Setup Menu, you will be prompted only when you try to enter Setup.

Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp 2.13 Save & Exit Setup ◎ ◎ ◎ ◎ ◎Figure 13. Save & Exit Setup CMOS Setup Utility-Copyright (C) 1984-2001 Award Software Standard CMOS Features Frequency/Voltage Control Advanced BIOS Features Load Fail-Safe Defaults Advanced Chipset Features Load Optimized Defaults Integrated Peripherals Set Supervisor Password Power Management Setup Set User Password PNP/PCI Configuration Save & Exit Setup PC Health Status Exit Without Saving Esc : Quit F9 : Menu in BIOS ←→↑↓: Select Item F10 : Save & Exit Setup Time , Date , Hard Disk Type ... Save & Exit Setup (Y/N)? Y Typing “Y” will quit the Setup Utility and save the user setup value to RTC CMOS RAM. Typing “N” will return to the Setup Utility.

Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp Bhapter 1 BIOS Settp 2.14 Exit Without Saving ◎ ◎ ◎ ◎ ◎Figure 14. Exit Without Saving CMOS Setup Utility-Copyright (C) 1984-2001 Award Software Standard CMOS Features Frequency/Voltage Control Advanced BIOS Features Load Fail-Safe Defaults Advanced Chipset Features Load Optimized Defaults Integrated Peripherals Set Supervisor Password Power Management Setup Set User Password PNP/PCI Configuration Save & Exit Setup PC Health Status Exit Without Saving Esc : Quit F9 : Menu in BIOS ←→↑↓: Select Item F10 : Save & Exit Setup Time , Date , Hard Disk Type ... Exit Without Saving (Y/N)? Y Typing “Y” will quit the Setup Utility without saving to RTC CMOS RAM. Typing “N” will return to the Setup Utility.

Chaoser 3 Crhver Inrsallashnn Chaoser 3 Crhver Inrsallashnn Chaoser 3 Crhver Inrsallashnn Chaoser 3 Crhver Inrsallashnn 3. Driver Installation Introduction There are motherboard drivers and utilities included in ACORP Bonus CD disc. You don't need to install all of them in order to boot your system. But after you finish the hardware installation, you have to install your operation system first (such as windows 98) before you can install any drivers or utilities. Please refer to your operation system installation guide. 3.1 Auto-run Menu You can use the auto-run menu of Bonus CD disc. Choose the utility or driver and select model name. Note:Please follow recommended procedure to install Windows ME and Windows 98.

Chaoser 3 Crhver Inrsallashnn Chaoser 3 Crhver Inrsallashnn Chaoser 3 Crhver Inrsallashnn Chaoser 3 Crhver Inrsallashnn 3.2 Installing Intelinf Driver You can install the Intel inf driver (IDE Bus master (For Windows NT use), Intel ATAPI Vendor Support Driver, Intel AGP, IRQ Routing Driver (For Windows 98 use), Intel Registry (INF) Driver) from the Bonus Pack CD disc auto-run menu. (1) Click "Driver" Item. (2) Click "Intelinf" Item. (For Windows NT no Support) (3) Click "infinst_autol".

Chaoser 3 Crhver Inrsallashnn Chaoser 3 Crhver Inrsallashnn Chaoser 3 Crhver Inrsallashnn Chaoser 3 Crhver Inrsallashnn Note: Installing this Bus Master IDE driver may cause Suspend to Hard Drive failure. 3.3 Installing Ultra ATA Driver It is necessary to install Bus Master IDE drive to support ATA hard disk. You can find the Ultra ATA driver from the Bonus Pack CD disc auto-run menu. (1) Click "Driver" Item. (2) Click "Uatadrv" Item. (3) Click "iatacd".

Chaoser 3 Crhver Inrsallashnn Chaoser 3 Crhver Inrsallashnn Chaoser 3 Crhver Inrsallashnn Chaoser 3 Crhver Inrsallashnn 3.4 Installing Hardware Monitoring Utility You can install Hardware Monitoring Utility to monitor CPU temperature, fans and system voltage. The hardware monitoring function is automatically implemented by the BIOS and utility software. No hardware installation is needed. (1) Click "Driver" Item. (2) Click "Hwm" Item. (3) Click "Setup" Item.

Chaoser 3 Crhver Inrsallashnn Chaoser 3 Crhver Inrsallashnn Chaoser 3 Crhver Inrsallashnn Chaoser 3 Crhver Inrsallashnn (5) Click "OK". (4) Click "Setup". Note: Only support for WinME & Win 98SE system.

Chaoser 3 Crhver Inrsallashnn Chaoser 3 Crhver Inrsallashnn Chaoser 3 Crhver Inrsallashnn Chaoser 3 Crhver Inrsallashnn 3.5 Installing Security Driver The Intel(R) Security Driver installs to the target system the Windows* driver files for the Intel(R) 82802 Firmware Hub component. It provides access to the Hardware Random Number Generator located in the Firmware Hub device. (1) Click "Driver" Item. (2) Click "Security" Item. (3) Click "Setup". Note: This function refers to systems containing the following Intel chipsets: Intel(R) 810 /810e/815/815e/820/ 820e/840 Chipset .

Chaoser 3 Crhver Inrsallashnn Chaoser 3 Crhver Inrsallashnn Chaoser 3 Crhver Inrsallashnn Chaoser 3 Crhver Inrsallashnn 3.6 Installing Sound Driver This motherboard comes with an AC97 CODEC and the sound controller is in Intel South Bridge chipset. You can find the sound driver from the Bonus Pack CD disc auto- run menu. (1) Click "Driver" Item. (2) Click "Sound" Item. Note: Before installing the onboard sound driver, please refer to the above picture and check which CODEC number was on the board. 1.If the CODEC number is Ad1881 then choose Ad1881 item. 2.If the CODEC number is Ad1881a then choose Ad1881a item. 3.If the CODEC number is Alc100 then choose Alc100 item. Note: For support by Windows 98 SE, Windows ME, Windows 2000, Windows NT system. (3) Select your system item.