Da-Lite Tensioned Conference Electrol Specifications

(H) x (W). Tensioned Conference Electrol® screen shall have three motors, one to operate door, one to operate screen and one to operate document camera arm. Door motor electrically operated 120 volt (60 Hz) not more than 1.2 amp. Shall have motor mounted inside the roller, to be three wire with ground, quick reversal type, oiled for life, with automatic ther- mal overload cutout, integral gears, capacitor and an electric brake to prevent coasting. To have pre-set but adjustable limit switches to automatically stop fabric door in the “ down“ position. The door will lift to the closed position where an internal micro-switch will cut off the electrical current to the door motor. The roller to be of rigid aluminum. Screen motor is electrically operated 120 volt (60 Hz) not more than 2.4 amp. Shall have motor mounted inside the roller, to be three wire with ground quick reversal type, oiled for life, with auto- matic thermal overload cutout, integral gears, capacitor and an electric brake to prevent coasting. To have pre-set but adjustable limit switches to automati- cally stop picture surface in the ”up“ and ”down“ positions. The roller to be of rigid metal. Camera arm motor is electrically operated 120 volt (60 Hz) not more than 2.4 amp. Shall have motor mounted inside the roller, to be two wire with ground quick reversal type, oiled for life, with automatic thermal overload cutout, integral gears, capacitor and an electric brake to prevent coasting. To have pre-set but adjustable limit switches to automatically stop the camera arm in the ”up“ and ”down“ positions. Screen fabric to be seamless, flame retar- dant and mildew resistant vinyl, with black masking borders standard. Each side of the fabric to have tab guide cable system to maintain even lateral ten- sion and hold surface flat. Custom slat bar with added weight maintains vertical tension on the screen surface. The ends of the slat to be protected by heavy duty plastic caps enclosing a preset adjustable mechanism for screen tensioning. Case shall be constructed of ¾” medium density fiberboard. Bottom of case to be self-trimming with a built-in flange around the bottom of the case. A section of the bottom of the case shall be an aluminum door equipped with hinges so that it opens and closes automatically with the lower- ing and raising of the picture surface. The balance of the bottom of the case shall be a second hinged aluminum door with manual opening to provide access. Hinges shall be mounted in a concealed way. Junction box shall be internally integrated into the housing making it possible to install the housing and wire to the building’s electrical system during construction. The junction box shall contain a quick connect connector that is mounted in the housing for easy plug-in connection to the motorized fabric and roller assembly. The motorized fabric and roller assembly to be installed in the case at the factory or at a later time at the job site. To be complete with integrated low voltage control unit and three position control switch and cover plate. SPECIFICATION DATA HDTV (16:9) Format Dimensions Viewing Area (H x W) Nominal Diagonal Maximum Drop* Overall Length of Case Weight. Approx. Ship. Wt. In. Cm In. Cm In. Cm In. Cm Lbs. Kg Lbs. Kg 45" x 80" 114 x 203 92" 234 19" 48 120" 305 ]325 147.4 569 258.1 52" x 92" 132 x 234 106" 269 12" 30 120" 305 340 154.2 584 264.9 54" x 96" 137 x 244 110" 279 251⁄2" 65 1431⁄8" 364 378 171.5 662 300.3 58" x 104" 147 x 264 119" 302 211⁄2" 55 1431⁄8" 364 383 173.7 667 302.5 65" x 116" 165 x 295 133" 338 141⁄2" 37 1431⁄8" 364 396 179.6 680 308.4 Wide (16:10) Format Dimensions Viewing Area (H x W) Nominal Diagonal Maximum Drop* Overall Length of Case Weight. Approx. Ship. Wt. In. Cm In. Cm In. Cm In. Cm Lbs. Kg Lbs. Kg 50" x 80" 127 x 203 94" 239 14" 36 120" 305 326 147.9 570 258.5 571⁄2" x 92" 146 x 234 109" 277 221⁄2" 57 1431⁄8" 364 378 171.5 662 300.3 60" x 96" 152 x 244 113" 287 191⁄2" 50 1431⁄8" 364 381 172.8 665 301.6 65" x 104" 165 x 264 123" 312 141⁄2" 37 1431⁄8" 364 384 174.2 668 303.0 69" x 110" 175 x 279 130" 330 101⁄2" 27 1431⁄8" 364 390 176.9 674 305.7 721⁄2" x 116" 184 x 295 137" 348 7" 18 1431⁄8" 364 403 182.8 687 311.6 Tensioned Conference Electrol ® Automatic Electric Projection Screen Model PRODUCT NOTES • All viewing surfaces will be seamless. • All viewing surfaces are standard with black backing. • *All screens standard with 12" (30 cm) black drop at top except the 69" x 110", which has 101⁄2" (27 cm), and the 721⁄2" x 116", which has 7" (18 cm). • Custom formats and sizes available upon request. Contact Da-Lite for feasibility. • Overall case length dimensions +/- ¼" (6 mm). • Detail dimensional drawings, wiring diagrams and installation instructions available upon request. • Specifications subject to change without notice. WHEN ORDERING, MARK APPROPRIATE SELECTIONS 1. Select size from charts below. 2. Select viewing surface (All Da-Lite surfaces are GREENGUARD GOLD Certified.): HD Progressive 0.6 High Contrast Da-Mat® HD Progressive 0.9 Pearlescent HD Progressive 1.1 Cinema Vision Da-Mat® High Contrast Cinema Vision 3. Optional accessories: Wireless Remote Control for LVC. Radio Frequency Remote Radio Frequency Range Extender available Infrared Remote Key Locking Cover Plate for LVC Switch. 220/240 Volt (50 Hz) motor. Video Projector Interface Control – built-in Plenum Enclosure – For use in environmental air space.

3100 North Detroit Street Warsaw, Indiana 46582 P: 574.267.8101 or 800.622.3737 F: 574.267.7804 or 877.325.4832 E: [email protected] www.da-lite.com DL–0193 11.13 © 2013 Milestone AV Technologies LLC. Printed in U.S.A. SUGGESTED METHODS OF INSTALLATION PRODUCT VIEWS Project Name: Architect: Phone: Contractor: Phone: Date: Revised: Side View Screen Roller Trim Flange Access Door Screen Door Door Roller Audience Side 55⁄16" 141⁄8" With Internal Hanger Bracket With External Hanger Bracket Internal Bracket Hand Holes 141/2" Note: Unit is Supplied With Internal and External Brackets But Not Threaded Rod. Self-Trimming Flange 185⁄8" 2" 3" 72" 16" 72" 183⁄16" 155⁄8" Electrical Box Outlet Front (Flange Is An Additional 1/8" Thick) 7" 81⁄4" 121⁄4" 120" or 1431⁄8" (See Size Chart) Back