Russound BGD1 Instruction Manual
Text of the manual
For your safety, please read and follow these precau-
tions before installing or using this product:
➤Read instructions. Read and understand all the
applicable instructions before installing or operat-
ing the product.
➤Retain documents. Keep this manual in a con-
venient place for reference.
➤Heed warnings. Be aware of all warnings on the
product an
CONNECTOR WELL – Accepts most
iPod models with supplied adapters
SOURCE/FUNCTION SELECTOR – 8-
position switch for selecting source
input or function
OS UPDATE PORT – 4-pole
connector for updating device
firmware with programming cable,
Russound part number 2500-
521065
RNET A/V PORT – RJ-45 connector
for RNET A/V Decoder
POWER JACK – C
Multi-Zone Controller CAS44
Power Supply
Connection to RNET system
Connection for IR control
Note: The BGD1 iBridge Dock requires the use of
an RAVD1 RNET A/V Decoder at the audio system,
regardless of which system is used.
1. Locate devices. Place the iBridge Dock where
the iPod will be located. Place the RNET A/V
Decoder with the audio system controller.
2. Run cable. Install CAT-5 or CAT-5e cable
between the Dock and Decoder locatio
