Abtus AV813 Operation Manual

www.abtussingapore.com ABtUS SIGAPORE PTE LTD www.abtussingapore.com Universal Projector Ceiling Mount Model: AV813 Revision 0 Patent Pending

This symbol indicates the incorrect handling. Ignoring this symbol can result in the possibility of personal injury and physical damage. This symbol indicates the incorrect handling. Ignoring this symbol can result in the possibility of personal injury or even death. IMPORTANT NOTES ● Thank you for purchasing the Universal Projector Ceiling Mount. This bracket is suitable for about 80% to 90% of projectors up to load of 20kg (44 lbs) ● To ensure correct usage, please read this instruction manual thoroughly. Keep this manual for future reference. ● BRACKETS SHOULD BE MOUNTED ONLY BY A QUALIFIED INSTALLER. ● User will be responsible for any injuries and damages tat may arise from improper installation and handing of Universal Ceiling Mounting Kit. ● Ensure all mounting screws are appropriately positioned and properly tightedned/ fastened. ● Installers are to ensure customer’s safety during installtion. ● We reserve the right to amend or undertake any necessary changes without prior notice. CAUTION WARNING This symbol indicates additional cautions (including warnings). This symbol indicates forbidden actions. This symbol indicates required actions. Causion (general) Forbidden (general) Required (general)

PACKAGE CONTENTS Assembling without the correct use bolts and screws at designated points may result in injury and damage to properties or the unit collapsing from its installed position. All bolts and screws must be used as per installation instructions. Check and ensure he ceiling where you install can support the weight or the projector and ceiling mounting. Steps should be taken to ensure the ceiling and installed unit can withstand external forces like earthquakers, vibrations, etc. All Ceiling Mounting Brackets are to fi rmly secured so the unit will not drop off its installed position. Do not install near an air conditioner or where there is excessive dust and smoke. Do not install in location where room temperature and humidity are excessively high ro prevent fi re. To prevent fi rem, avoid contact with water.

WARNING Do not place on sloping surface Strictly install on a horizontal surface only. Keep the room well ventilated to prevent room temperature rising and possibilities resulting in fi re. Ensure the Projector is mounted so that it is not possible for undue load to be put on the bracket.

Part 1 Mounting Plate........ 1 pc Part 2 Fixing Coupler........ 1 pc Part 3 Top Column........ 1 pc Part 5 Bottom Column........ 1 pc Part 7 Bottom Spacer........ 4 pcs Part 8 Square Nut........ 4 pcs Part 4 Mid Column........ 1 pc Part 6 Locking Hook........ 1 pc Part 9 Universal Head Assembly........ 1 pc

COMPONENT CHECKLIST Part 10 M5 x 10 Socket Button Cap Screw........ 4 pcs Part 11 M8 Self Locking Nylon Nut ......................... 8 pcs Part 12 Extension Bracket 75mm.......... 2 pcs 150mm........ 2 pcs Part 13 Truss Head Screw M2. 6x15 M3x15 M3x20 ....... 4 pcs each M4x15/M4x20/M4x25.............. 4 pcs each M5x15/M5x20/M5x25.............. 4 pcs each M6x15/M6x20/M6x25.............. 4 pcs each Part 14 M8 x 50 Socket Cap Screw........ 8 pcs Part 15 Washer 1mm ................... 4 pcs 2mm ................... 4 pcs 4mm ................... 4 pcs Part 16 Allen Key Ф 3 ................... 1 pc Ф 6 ................... 1 pc Part 17 Washer Ф 3 washer ................... 4 pcs each

1.2 Install Top Column with M8x50 socket Cap Screw and M8 Self-Locking Nylon Nut, fi x Mounting Plate and Fixing Coupler togather. 1.4 Install Bottom Column. First align two holes on the Mid Column at the suitable holes on the Bottom Column, and tighten them with M8x50 Socket Cap Screw and M8 Self-Locking Nylon Nut. Refer to drawing. 1.1 Install Mounting Plate and Fixing Coupler. 1.3 Install Mid Column. First align two holes on the Mid Column at the suitable holes on the Top Column, tighten them with M8x50 Socket Cap Screw and M8 Self- Locking Nylon nut. Refer to drawing.

INSTALLATION GUIDE 2. Parts Assembly - Installation of Universal Base 2.2 Lift the Projector with both middle fi nger along the depth of the Projector to search for the Cental of gravity (CG). 2.4 Locate the Projector CG position and determine screw size for mounting the Projector by placing the Universal head Assembly near to the Projector CG found in step-2.3. 2.6 Change to a shorter or longer Extension Brackets provided in the package if needed. There are 2 sizes availalble as shown. 2.1 Lift the Projector with both middle fi nger along the depth od the Projector to search for the Central of Gravity (CG). 2.3 When the CG Point (Depth of Projector) and (Width of Projector) intersection meet, that will be the assume CG of Projector 2.5 Loosen and slide the Extension Brackets on the Universal Head Assembly and align them to the Projector mounting holes. CG of Projector CG Point (Width of Projector) Extension Bracket - 75 mm Extension Bracket -150 mm CG Point (Depth of Projector)

the package to tighten the Extension Brackets to the Projector. 2.7 Assemble the selected Extension Bracket with the following items: Bottom Spacer, Spacer (if needed) & Square Nut. For Extension Bracket more than 50mm (1.97”) (Square Nut x 2 ) 2.9 Lift up the Projector to check the CG of the assembled Projector and tighten all the screws once confi rmed. The assembly is then completed. Bottom Spacer Bottom Spacer Spacer of Various Size Spacer of Various Size

INSTALLATION GUIDE 3. Installation of Ceiling Mounting Kit * Please consult our authorized service person when you meet any trouble in installation. We are not liable for any damage or injury caused by mishandling or improper operation. 3.2 Lift and insert the assembled Projector done in step-2.9 into the lower Rod of the Universal Ceiling Mounting Kit. Insert the Locking Hook into the cutting slot and tighten them with M8x50 Socket cap screw and Self-locking nut. 3.1 Install the Universal Ceiling Mounting Kit to the ceiling. Fix Suspension Rod by M10 expansion bolt (not included) on the ceiling. Refer to drawing. 3.3 Installtion completed. INSERT

www.abtussingapore.com SPECIFICATION Gross Weight : 4.3kg (9.2 lbs) Gross Dimension : 430 x 150 x 100 mm | 17” x 6” x 4” inch Extendable Length with Optional Rod : (700) mm Ø 35mm & Ø 40mm Load Capacity : 20kg (44 lbs) ** For details and updated Command and Program Software, please visit and download from www.abtussingapore.com *Specifi cations are subject to changes without notice.