Hilti PRA 30 Operating Instructions Manual

75 mm (3 in) Marking notches On both sides Automatic power-off When no beam is detected: 15 min Dimensions 160 mm (6.5") X 67 mm (2.6") X 27 mm (0.9") Weight (including batteries) 0.25 kg (0.6 lbs) Power source 2 AA‑size batteries Battery life (alkaline-manganese) Temperature +20°C (+68 °F): 50 h Operating temperature range -20…+50°C (-4°F to 122°F) Storage temperature -25…+60°C (-13 °F to 140 °F) Protection class IP 56 in accordance with IEC 529 4 Safety instructions 4.1 Basic information concerning safety In addition to the information ...

W 3603 | 0313 | 00-Pos. 1 | 1 Printed in Germany © 2013 Right of technical and programme changes reserved S. E. & O. 368229 / A2 Printed: 07.07.2013 | Doc-Nr: PUB / 5140546 / 000 / 00 ...

7.1 Cleaning and drying 1. Blow dust off the surfaces. 2. Do not touch the display areas or the receiving window with the fingers. 3. Use only a clean, soft cloth for cleaning. If necessary, moisten the cloth slightly with pure alcohol or a little water. NOTE Do not use any other liquids as these may damage the plastic components. 4. Observe the temperature limits when storing your equipment. This is particularly important in winter / summer if the equipment is kept inside a motor vehicle (25°C to +60°C / -22°F to +140°F). 7.2 Storage Remove the tool from its case if ...

Designation: Remote control / laser receiver Type: PRA 30 / PRA 31 Generation: 01 Year of design: 2008/2009 We declare, on our sole responsibility, that this product complies with the following directives and standards: 2011/65/EU, 2006/95/EC, 2004/108/EC. Hilti Corporation, Feldkircherstrasse 100, FL‑9494 Schaan Paolo Luccini Matthias Gillner Head of BA Quality and Process Man- agement Executive Vice President Business Area Electric Tools & Ac- cessories Business Area Electric Tools & Accessories 01/2012 01/2012 Technical documentation filed at: Hi ...