Getac S400 Operation Manual

Text of the manual

3. Notes and Precautions

z You must connect the AC adapter for full I/O functionality. z DO NOT touch the connectors of the Office Dock. z DO NOT attempt to make connections if there is any object between the computer and the Office Dock. Doing so could damage the computer and the Office Dock. z DO NOT attempt to move the Office Dock when it is connected to the computer. z If the computer malfunctions while the Office Dock is connected, turn off the computer and disconnect the Office Dock. Connect the AC adapter to the computer and check to see if the computer operates normally. If the computer operates normally, the Office Dock may be malfunctioning. z DO NOT place metal objects or containers of liquid on top of the Office Dock. If paper clips, coins, or other metal objects, or water, or other liquid spills, get inside the Office Dock, fire or electric shock may result. Immediately unplug the power cable and remove the computer from the Office Dock. z Unplug the power cord and remove the computer from the Office Dock if any of the following malfunctions occur: – the Office Dock is damaged – smoke is emitted – an unusual smell is emitted – the Office Dock is unusually hot Continuing to use the Office Dock while any of the above conditions are present may result in fire or electric shock. Rugged Mobile Computing Solutions S400 OFFICE DOCK OPERATION GUIDE 5 6 1 5 8 3 3 1 0 0 0 1 R 0 0

The Office Dock makes your S400 a desktop computer. With peripheral

devices such as the keyboard, mouse, monitor, and printer all connected to the Office Dock, you have a handy work area on your desk. There are no hassles of disconnecting or connecting the various cables whenever you have to carry S400 between your desk and elsewhere. 2. Installation 1. Connect the AC adapter to the Office Dock. The power indicator on your Office Dock will light up. 2. Disconnect all cables from your S400 and turn off the power. 3. Slide and open the docking connector cover on the bottom of S400. 4. Align S400 with the alignment mark and guide pins on the Office Dock and put down S400 on the dock. 5. Connect the cables of your peripheral devices to the corresponding connectors on your Office Dock. Power Connector VGA Port LAN (RJ-45) Port Audio Output Connector Microphone Connector RS232 Serial Ports Docking Connector Guide Pin Alignment Mark Guide Pin Kensington Lock USB Ports Parallel Port PS2 Mouse Connector PS2 Keyboard Connector USB Port DVI-D Port eSATA/USB Combo Port Power Indicator DisplayPort

Other Docking Station Manuals