LD WS1000 Operation & User’s Manual

790,850 - 813,800 MHz* (838,850 - 861,800 MHz* X-Version) Telekommunikationsbehörde. n WS1000 - 2 (X) User Manual www.ld-systems.com A A B B 6 5 4 3 2 1 6 5 4 3 2 1 -5 -5 -3 -3 0 0 +3 +3 +6 +6 AF AF RF RF V V SET IR GROUP CHANNEL SCAN FREQ GROUP CHANNEL SCAN FREQ POWER -20 -20 -10 -10 ASC ASC SET WS 1000 R2 PHONES PHONES UHF PLL Diversi ty Dual Channel Wirel ess Receiver

Congratulations! Welcome to the WS-1000-2 wireless system. To users who need to build an advanced UHF radio system, WS-1000-2 provides an excellent solution. With 160 frequency bands, WS-1000 is applicable for various occasions of radio-cast such as live shows, broadcast, meetings, instrument pickups etc. Touch buttons and liquid crystal displays are equipped within all the components for fast and simple system setup. The “User Guide” and “ Quick Setting Guide including in your system will tell you all the details you need to operate the system efficiently. ” Most countries closely regulate the radio frequencies used in the transmission of wireless information. These regulations state which devises can use which frequencies, and help to limit the amount of RF (radio frequency) interference in all wireless communications. To be flexible enough to operate worldwide, W -1000 system offers a number of frequency ranges. You can choose an appreciate one according to the wireless regulation in your area.Available bands are: S -2 To facilitate system setup and protect against RF interference, each system comes with multiple predefined frequency groups and channels. When using a double WS-1000 system, the operating frequency will generally not have to be changed. In an installation with multiple receiver/transmitter systems, each system must operate on a separate channel. The group and channel system provides an optimum frequency spread when using multiple receiver/transmitter systems. Within a single frequency band, up to 8 individual receiver/transmitter systems may be used in a single installation. The Table of the Contents System Components WS-1000-R2 Receiver Features WS-1000MD(C) Handheld Transmitter WS-1000BP Body Pack Transmitter System Setup Rack-Mounting the Receivers Tips for Improving System Performance Troubleshooting Specifications CATALOGUE 1 2 3 4 5 6 7 8 9 9 10 790,850 - 813,800 MHz 838,850 - 861,800 MHz (X-Version)

UHF PLL BodyPack Transmitter WS-1000 R2 receiver 2 “AA” batteries A 1/4” RF connector Power supply 19” rack ears Two antennas User guide WS1000MD handheld transmitter or WS 1000MC (Condenser) WS-1000BP bodypack transmitter Microphone (choice of Ws100ML Lavalier or WS100MH Headset) WS-1000BP bodypack transmitter 1/4” to mini 3-pin guitar cable System Components All systems include: Vocalist system includes: Lavalier/ Headset system includes: Guitar system includes 3 4 OFF ON GROUP CHANNEL INFRARED BATT 160 CHN UHF PLL True Diversity Wireless System 790,850 - 813,800 MHz* (838,850 - 861,800 MHz* X-Version) WS1000-2 (X) 1/4inch mix output jack XLR mix output jack Channel 2 XLR output jack Channel 1 XLR output jack Channel 1 Fine adjustment of mute threshold level AC adapter jack Antenna jack A WS 1000R2 Receiver Features Front Panel Rear Panel 1 2 3 4 5 6 5 System menu upward button Please see “System Setup” on Page 8 System setup button Please see “System Setup” on Page 8 System menu downward button Please see “ System Setup” on Page 8 Sync Button Press to initiate IR connection between receiver and transmitter. Infrared (IR) Monitor earphone jack Monitor volume window On/Off switch Antenna A receiver indicator light Light glows when Antenna A is on . Antenna A RF indicator light Antenna B RF indicator light Antenna B receiver indicator light Light glows when Antenna B is on . Channel 1 audio indicator light Channel 1 LCD panel Please see “System Setup” on Page 8 Antenna jack B Data input jack Connect to computer control Data output jack Connect to computer control Channel 2 Fine adjustment of mute threshold level It is the mute enabling threshold value, which is factory default and usually no need to adjust, if there are any interference signals, this threshold value can be increased by turning the knob clockwise until RF signal lamp goes out. 11 10 7 8 9 12 13 14 6 7 9 8 POWER A A B B 6 5 4 3 2 1 6 5 4 3 2 1 -20 -10 -5 -3 0 +3 +6 AF RF RF V ASC SET IR GROUP CHANNEL SCAN FREQ -20 -10 -5 -3 0 +3 +6 AF V ASC SET WS 1000 R2 PHONES PHONES UHF PLL Diversity Dual Channel Wireless Receiver GROUP CHANNEL SCAN FREQ 1 2 3 11 10 4 5 6 7 8 9 12 13 14 ANTENNA-A ANTENNA-B 2 IN 1 MIX UNBAL OUTPUT CHANNEL1 XLR BALANCED -12dBV CHANNEL2 XLR BALANCED -12dBV 2 IN 1 MIX XLR BALANCED -12dBV AF OUTPUT MADE IN CHINA Data Input Data Output CHANNEL 2 MUTE LEVEL CHANNEL 1 MUTE LEVEL D.C.12-18V IN 500mA + + - 11 10 1 2 3 4 5 6 7 8 9 2 3 4 1 11 10 A A B B 6 5 4 3 2 1 6 5 4 3 2 1 -5 -5 -3 -3 0 0 +3 +3 +6 +6 AF AF RF RF V V SET IR GROUP CHANNEL SCAN FREQ GROUP CHANNEL SCAN FREQ POWER -20 -20 -10 -10 ASC ASC SET WS 1000 R2 PHONES PHONES UHF PLL Diversity Dual Channel Wireless Receiver A A B B 6 5 4 3 2 1 6 5 4 3 2 1 -5 -5 -3 -3 0 0 +3 +3 +6 +6 AF AF RF RF V V SET IR GROUP CHANNEL SCAN FREQ GROUP CHANNEL SCAN FREQ POWER -2 0 -2 0 -10 -10 ASC ASC SET WS 1000 R2 PHONES PHONES UHF PLL Diversity Dual Channel Wireless Receiver

Changing batteries: Expected life for Two Alkaline batteries is approximately 13 hours. When the transmitter light glows red, the batteries should be changed immediately, as shown on the left. Clip the transmitter to belt , or slide a guitar strap through the transmitter clip ,as shown For best results, slide the transmitter until the belt is pressed against the base for the clip. 1 1 2 WS-1000BP Bodypack Transmitter Antenna LCD panel Please see “System Setup” on Page 7. IR Receive IR signals to synchronize frequencies. window Select button Please see “System Setup” on Page 7 3-pin Microphone Input Jack Gain adjustment switch and mute indicator Two gain settings are available on WS-1000BP, choose the appropriate setting for your instrument Mic: microphone 0: Guitar with passive pickups -10dB: Guitar with active pickups Power/ASC indicator Glowing green: battery power low Flash green: IR transmission in process Features： Mute Indicator Red light on indicate Mute mode Power/Mute switch Push for 3 second to turn on/off 5 6 BATT 1 2 3 4 1 2 3 4 GROUP CHANNEL INFRARED GROUP CHANNEL INFRA RED BATT 5 5 6 6 Condensor mic (WS-1000MC) Dynamic mic (WS-1000MD) LCD screen Power source controlling switch Microphone input sensitivity adjustment. Left turn for output level decrease, right turn for output level increase. Please See “system setup ” on page 7. Functions: 14 hours

or to choose the appreciate frequency group, as shown on the left ; press “ SET” again , “CHANNEL” flashes,press or to choose the appreciate channel, as shown on the left shown. For best results when operating multiple systems, set all systems to a single group: then set each system to a unique channel within that group. Receiver Volume Setting: The receiver has electric volume control, as on the normal display, press or directly to control the output volume (altogether 64 steps) as shown on the left. We recommend a Set-Up between level 42 to 45. Normal Display: RF level,group no,channel no,frequenay as left . Infrared Frequency Scanning : Note:In multiple receivers system, every receiver's address must be different! Turn off the transmitter and open the battery canister (only at bodypack - handheld has the IR receiver at the bottom of the mic see page 5 point 6) turn the IR window on the receiver IR window, press “ASC” button, and turn on the transmitter again. Turn the Bodypack receiver IR port on the receiver IP window,then press “ASC” button, and then press the “ASC” button on the bodypack transmitter. The receiver keeps transmitting sync frequencies each time you press the “ASC”button, and the sign “INFRARED” flash as shown on the left. Each time turn on the transmitter and press the “ASC” button at the receiver, the reiceiver will start the IR receiving system for 25 seconds. The handheld transmitter lights up when the IR receiver system starts, the whole display within the backpack transmitter flashes (the IR indicator light also flashes at the same time) Attention: The distance of the receiver and the transmitter should be less than 0.5m as the IR connection is setting; only can turn one transmitter IR window on the receiver at each IR connection when multi-system is using. Auto-Scan Function: The WS1000 Series has a frequency Auto-Scan Function which makes it easier to find the next interference free Channel within 1 group. It may can happen that you still have to find the next interference free channel manual. Press “SET” Button 3x until “SCAN” flash. Press or to start the Auto Scan Run, which may will find the next next interference free Channel within the selected group. Battery Status: The handheld transmitter and the bodypack transmitter had six levels,as shown on the left. Group and Channel Display: After the finishing the connection of the receiver and the transmitter, the transmitters receiver keeps displaying the numbers of the group and channel for 5 seconds, as shown on the left, then back to the normal status display. Normal Display: The transmitters shows battery power and working frequency, as shown on the left. Receiver Programming 1 1 2 2 3 4 3 6 Transmitter Status Display 5 Handheld Transmitter Bodypack Transmitter Rack-Mounting the Receiver 7 8 Two TNC connecting cable (included) Two TNC connector (inlcuded) One Receiver (with 19” Rack Ears) Ten TNC connecting cable (included) Two TNC connector (included) Four receivers WS100DA Antenna Distributor (optional) (19” Rack Ears Included) A A B B 6 5 4 3 2 1 6 5 4 3 2 1 -5 -5 -3 -3 0 0 +3 +3 +6 +6 AF AF RF RF V V SET IR GROUP CHANNEL SCAN FREQ GROUP CHANNEL SCAN FREQ POWER - 20 - 20 -10 -10 ASC ASC SET WS 1000 R2 PHONES PHONES UHF PLL Diversity Dual Channel Wireless Receiver POWER UHF ANTENNA DISTRIBUTE IMPLEMENT WS100AD WS100AD ANTEN NA-B ANT-1 ANT-1 ANT-2 ANT-2 ANT-3 ANT-3 ANT-4 ANT-4 ANTEN NA-A D.C.12-18V IN 200mA + - Maintain a line of sight between transmitter and antenna. WS 1000 R2 WS 1000 R2 WS 1000 R2 WS 1000 R2

Avoid placing the receiver near metal surfaces or any digital equipment (CD players, computes, etc) Keep the receiver away from the wall and over 1m to the ground Cellular telephones and two-way radio and so on can interfering the transmitting frequencies, maintain a distance from the interfering equipments or any cause interfering. Issue Indicator Status Solution Trips for improving System Performance Troubles Shooting Transmitter LCD off Turn on transmitter Make sure the +/- indicator on battery match the transmitter terminals No sound or faint sound Receiver LCD off Make sure AC adapter is securely plugged into electrical outlet and into DC input connector on rear panel of receiver. Receiver RF indicator glows Turn the receiver up Turn up the Gain adjustment switch in the transmitter Check the power connection of the receiver and amplifier or mixer Receiver RF indicator off, transmitter LCD on Take the receiver away from the metal objects Check whether there is hamper between receiver and transmitter Move the transmitter near the receiver Check the receiver and transmitter whether use the same frequency The battery power indicator light on LCD flashes Change the batteries in transmitter Distortion or unwanted noise bursts Receiver display indicators antenna activity Remove nearby sources of RF inte rference(CD players, computers , digital effects ,in-ear monitor systems, etc.) Distortion level increases gradually Sound level different from cabled guitar or microphone, or when using different guitars Adjust transmitter again and receiver volume as necessary Transmitter power indicator light flashing on the LCD Replace transmitter batteries Specifications Frequency Range and Transmitter Output level Operating Range under Typical Condition: 80m (240 ft.) Note: actual range depends on RF signals absorption,reflection, and interference. Audio Frequency Response (+/-3 dB): 60Hz～16KHz Total Harmonic Distortion ( +/- 30 KHz deviation,1 KHz tone): <1% Dynamic Range: ＞90 dB (A –weighted) Operating Temperature Range: -10 C to +50 C Note: battery characteristics may limit the range Audio Input Level Maximum: 0 dBV maximum at mic again position +10 dBV maximum at 0 dB gain position +20 dBV maximum at –10 dB gain position Gain adjustment Range: 30 dB Input Impedance: 470 kohm Dimensions: 89mm H × 65mm W × 24mm D Weight: 85 g without batteries Power Requirement: Two “AA” size alkaline or rechargeable batteries Battery life: Up to 13 hours (Alkaline) Band Range Transmitter RF level UA 518-548 MHz 13dBm UB 630-660 MHz 13dBm UC 740-770 MHz 10dBm UD 800-822 MHz 10dBm UE 838-865 MHz 10dBm System Body pack Transmitter Dimensions (including the microphone): 243mm × 50mm Diameter Weight: 300 g Battery Requirements: 2 “AA” alkaline batteries or rechargeable batteries Battery Life: Up to 14 hours (Alkaline) Audio Output Level Maximum (ref. +/-30 KHz, 1 KHz): XLR connector (into 600 load): -12 dBV 1/4inch connector (into 3000 load): -18 dBV Output Impedance: XLRconnector 200ohms 1/4inch connector 1kohm XLR Output: Impedance balanced Pin 1: Ground Pin 2: (+) Pin 3: (-) : : 5 410 8 : 25 Power Requirements 12-18 Vdc at 1000mA, supplied by external power supply Ω Ω Sensitivity (intermediate frequency adjustment audio noise output <-93 dBm) Image Rejection ＞ 90 dB Dimensions 4 mm H × mm W × 1 0mm D Weight 00 g Receiver Handheld Transmitter 9 10

collection systems) This marking shown on the product or its literature, indicates that it should not be Disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please Seperate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal. (Waste Electrical & Electronic Equipment) Correct Disposal of This Product Recycling (Batteries or rechargeable batteries) The supplied batteries or rechargeable batteries can be recycled. Please dispose of them as special waste or return them to your specialist dealer. In order to protect the environment, only dispose exhausted batteries. Together for a good nature. EG-Konformitätserklärung Diese Geräte entsprechen den grundlegenden Anforderungen und den weiteren Vorgaben der Richtlinien 1999/5/EU, 89/336/EU und 73/23/EU. Die Erklärung steht im Internet unter zum Download zur Verfügung. CE Declaration of Conformity This equipment is in compliance with the essential requirement and other relevant provisions of Directives 1999/5/EC, 89/336/ES or 73/23/EC. The declaration is available for donwload on the internet site at www.adamhall.com. Before Putting the device into operation, please observe the respective country-specific regulations! Déclaration de conformité pour la CEE Ces appareils sont conformes aux exigencies essentielles et aux autres dispositions pertinentes de les Directives 1999/5/EC, 89/336/EC et 73/23/EC. Vous trouvez cette declaration dans la internet sous www.adamhall.com. Avant d'utiliser l'appareil, veuillez observer les dispositions légales en vigueur dans votre pays. Dichiarazione di vonformità UE I presenti apparecchi sono conformi ai requisiti fondamentali e alle ulteriori prescrizioni delle normative 1999/5/EU, 89/336/UE e 73/23/UE. Il dichiarazione disponibile sul sito Internet . Prima della messa in funzione seguite le prescrizioni vigenti nel paese nel quale viene utilizzato! Declaración de Conformidad Este equipo cumple tanto los requisitos esenciales como otras disposiciones de las Directivas 1999/5/CE, 89/336/CE y 73/23/CE. Si desea leer el declaración, visite la página www.adamhall.com. Anterior a la puesta en funcionamiento deberán observarse las correspondientes ordenanzas nacionales! EU-verklaring van overeenstemming Deze apparaten voldoen aan de fundamentele eisen en overige voorschriften van de richtlijnen 1999/5/EU, 89/336/EU en 73/23/EU. Het verklaring is op internet onder www.adamhall.com beschikbaar. Voor inbedrijfstelling dient u de afzonderlijke landspecifieke voorschriften in acht te nemen! www.adamhall.com www.adamhall.com Safety instructions No user serviceable parts inside! Never open the transmitter, otherwise you can receive an electric shock. If units are opened by customers in breach of this instruction, the warranty Becomes null and void. Use the transmitter in dry rooms only. Never expose it to water (eg: never place it in a position where it could be subjected to water splashes). Do not place any objects containing liquids on the top of the unit. Keep the transmitter away from direct sunlight, central heating radiators, electric heaters and similar sources of heat. Ensure sufficient ventilation, especially when it is mounted into a 19” rack. Use a damp cloth for cleaning the unit. Do not use any cleansing agents or solvents. 11 12