Fujitsu Eternus DX80 S2 Instal Setup

DX410 S2 and DX440 S2 Initial Setup Copyright Fujitsu Technology Solutions, Release August 2011 Initial Setup ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 0

Connect FST to DX400 S2 Initial Configuration of the FST Initial Configuration Web GUI Initial Wizard System Setup Initial Manual Setup Initial Setup ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 Copyright Fujitsu Technology Solutions, Release August 2011 Content 1

DX80 S2 and DX90 S2 systems have one MNT LAN port per CM The MNT port is shared for both the Field Engineer and customer administration tasks Connect the LAN cable of the Field Service Terminal (FST) to the port labeled "MNT" at the Controller Module • The "Master LED" of the respective CM lights in green Copyright Fujitsu Technology Solutions, Release August 2011 Initial Setup ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 MNT Port Master LED 2

DX400 S2 systems support a specific FST LAN port per CM Connect the LAN cable of the Field Service Terminal (FST) to the port labeled "FST" at the Controller Module • The "Master LED" of the respective CM lights in green Separate LAN port labeled "MNT" at each CM can be connected to the customer LAN Both ports can be used for Field Engineer as well as for customer administration tasks Copyright Fujitsu Technology Solutions, Release August 2011 Initial Setup ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 FST Port Master LED MNT Port 3

Connect the FST to the Master CM of the ETERNUS DX S2 system The default IP address of the ETERNUS Manager GUI • http://192.168.1.1/ Copyright Fujitsu Technology Solutions, Release August 2011 Initial Setup ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 Web browser Internet Explorer 7.0/8.0 or later Mozilla Firefox 3.6.x or later LAN cable Straight cable or cross-linked cable (direct connection) IP Address/Subnet mask ETERNUS DX S2 Entry: MNT ETERNUS DX S2 Midrange: FST Factory default IP Address: 192.168.1.1 Factory Subnet mask: 255.255.255.0 IP address of the FST Select it within the same subnet of IP Address that is used for the ETERNUS LAN Port (For example 192.168.1.20) Caution Do not use a proxy server or cache (Temporary Internet Files) JavaScript and Style Sheet must be enabled for the browser 4

To start the installation procedure, logon to the ETERNUS DX S2 Web GUI using the standard User Account User name: root Password: root Copyright Fujitsu Technology Solutions, Release August 2011 Initial Setup ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 5

The opening screen giving a quick overview about the system directly appears after log-in to the ETERNUS DX S2 Web GUI Copyright Fujitsu Technology Solutions, Release August 2011 Initial Setup ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 Status overview of the system Global overview about configured disk capacity Global System information 6

Orange Component is under maintenance (self test) Yellow Preventive maintenance is required for some components. Pinned data is detected. Red This status sign is displayed under the following conditions Component failure is detected Loop Down is detected Red This status sign is displayed under the following conditions Abnormal status is detected at power on Abnormal status is detected at power off, the system has not started up normally Error during restoration of the operating environment at power- on The system is abnormal Initial Configuration Web GUI (3) General status information of the ETERNUS DX S2 system Copyright Fujitsu Technology Solutions, Release August 2011 Initial Setup ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 7

Status information of each ETERNUS DX S2 component Copyright Fujitsu Technology Solutions, Release August 2011 Initial Setup ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 Indicator Colour Description Green Each component is in normal status Blue A component is installed but unused Orange Component is under maintenance (self test) Yellow Preventive maintenance is required Red Component failure is detected 8

The first Initial Setup Wizard Setup the Storage System Name, Set Date & Time, Change Root password Feature registration • Thin Provisioning, Advanced Copy and SED Authentication key Set Network Environment and log out to activate the settings Copyright Fujitsu Technology Solutions, Release August 2011 Initial Setup ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 9

The second Initial Setup Wizard session can be started after the first setup is done and it supports the setup of the notification network components SNMP • Agent Basics, Manager, Agent User, Agent Community, Agent Trap Notification • e-Mail and syslog Copyright Fujitsu Technology Solutions, Release August 2011 Initial Setup ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 10

"System" "System Settings" Time, Date and time zone Daylight Saving Time NTP server Copyright Fujitsu Technology Solutions, Release August 2011 Initial Setup ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 11

Optional settings to define system information A self-explanatory name for the ETERNUS DX system A description of the location of the ETERNUS DX installation Contact information of the administrator Copyright Fujitsu Technology Solutions, Release August 2011 Initial Setup ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 12

It is always recommended to change the default passwords (after customer's approval) It is recommended to setup an additional user account with appropriate permissions to administrate other user accounts • The user account "f.ce" has per default only the permission to change its own password • Helps in situations with forgotten passwords Copyright Fujitsu Technology Solutions, Release August 2011 Initial Setup ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 13

IP Address of the Master CM In the event of an Ethernet link error of the Master CM MNT port, the IP address is taken over automatically by the Slave CM MNT port In a DX400 S2 system it is also possible to setup the network environment for the FST port Copyright Fujitsu Technology Solutions, Release August 2011 Initial Setup ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 Allowed IP List • Default Gateway must be set • Defines all servers that are allowed to access the LAN port of the ETERNUS DX S2 system • Either Host IP Address and Netmask • Or Network Segment Address and Netmask 14

This window allows or denies different TCP/IP management services that can be used via the LAN ports "MNT is available in DX S2 systems "FST" is available in DX400 S2 systems only "RMT" is used at Fujitsu site only Copyright Fujitsu Technology Solutions, Release August 2011 Initial Setup ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 15

Setup E-Mail Notification window can be used to define Email notification services Email server settings Email retries Copyright Fujitsu Technology Solutions, Release August 2011 Initial Setup ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 16

This window can be used to define up to two syslog servers Any Unix or Linux server with a running "syslog" daemon in which the remote collection service is enabled Also any other error collection program that supports the standard syslog protocol can be used • For example Microsoft Operations Manager (MOM) Copyright Fujitsu Technology Solutions, Release August 2011 Initial Setup ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 17

Setup SNMP Interface SNMP is disabled by default SNMP must be enabled for the other SNMP settings to appear in bold under the "Action" column Copyright Fujitsu Technology Solutions, Release August 2011 Initial Setup ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 18