Datalogic Gryphon DX30 Quick Reference Manual

959 Terry Street Eugene, Oregon 97402 Telephone: (541) 683-5700 Fax: (541) 345-7140 An Unpublished Work - All rights reserved. No part of the contents of this documentation or the procedures described therein may be reproduced or transmitted in any form or by any means without prior written per-mission of Datalogic Scanning, Inc. or its subsidiaries or affiliates ("Datalogic" or “Datalogic Scanning”). Owners of Datalogic products are hereby granted a non-exclusive, revocable license to reproduce and transmit this documentation for the purchaser's own internal business purposes. Purchaser shall not remove or alter any proprietary notices, including copyright notices, contained in this documentation and shall ensure that all notices appear on any reproductions of the documentation. Should future revisions of this manual be published, you can acquire printed versions by contacting your Datalogic representative. Electronic versions may either be downloadable from the Datalogic website (www.scanning.datalogic.com) or provided on appropriate media. If you visit our website and would like to make comments or suggestions about this or other Datalogic publications, please let us know via the "Contact Datalogic" page. DISCLAIMER Datalogic has taken reasonable measures to provide information in this manual that is complete and accurate, however, Datalogic reserves the right to change any specification at any time without prior notice. Datalogic is a registered trademark of Datalogic S.p.A. in many countries and the Datalogic logo is a trademark of Datalogic S.p.A. all licensed to Datalogic Scanning, Inc. All other trademarks and trade names referred to herein are property of their respective owners. SERVICES AND SUPPORT Datalogic provides several services as well as technical support through its website. Log on to www.scanning.datalogic.com and click on the links indicated for further information including: • PRODUCTS Search through the links to arrive at your product page where you can download specific Manuals and Software & Utilities including: - Datalogic Aladdin™ a multi-platform utility program, which allows device configuration using a PC. It provides RS232/USB-COM interface configuration as well as configuration barcode printing. • SERVICES & SUPPORT - Datalogic Services - Warranty Extensions and Maintenance Agreements - Authorised Repair Centres • CONTACT US E-mail form and listing of Datalogic Subsidiaries WARRANTY Datalogic warranties this product against defects in workmanship and materials, for a period of 5 years from the date of shipment, provided that the product is operated under normal and proper conditions. Datalogic has the faculty to repair or replace the product; these provisions do not prolong the original warranty term. The warranty does not apply to any product that has been subject to misuse, accidental damage, unauthorized repair or tampering. Datalogic Scanning, Inc. 959 Terry Street Eugene, OR 97402 07 dichiara che declares that the déclare que le bescheinigt, daß das Gerät declare que el Gryphon D1XX Gryphon D2XX e tutti i suoi modelli and all its models et tous ses modèles und seine Modelle y todos sus modelos sono conformi alle Direttive del Consiglio Europeo sottoelencate: are in conformity with the requirements of the European Council Directives listed below: sont conformes aux spécifications des Directives de l'Union Européenne ci-dessous: den nachstehenden angeführten Direktiven des Europäischen Rats: cumple con los requisitos de las Directivas del Consejo Europeo, según la lista siguiente: 89/336/EEC EMC Directive e 92/31/EEC, 93/68/EEC emendamenti successivi and further amendments et ses successifs amendements und späteren Abänderungen y succesivas enmiendas Basate sulle legislazioni degli Stati membri in relazione alla compatibilità elettromagnetica ed alla sicurezza dei prodotti. On the approximation of the laws of Member States relating to electromagnetic compatibility and product safety. Basée sur la législation des Etats membres relative à la compatibilité électromagnétique et à la sécurité des produits. Über die Annäherung der Gesetze der Mitgliedsstaaten in bezug auf elektromagnetische Verträglichkeit und Produktsicherheit entsprechen. Basado en la aproximación de las leyes de los Países Miembros respecto a la compatibilidad electromagnética y las Medidas de seguridad relativas al producto. Questa dichiarazione è basata sulla conformità dei prodotti alle norme seguenti: This declaration is based upon compliance of the products to the following standards: Cette déclaration repose sur la conformité des produits aux normes suivantes: Diese Erklärung basiert darauf, daß das Produkt den folgenden Normen entspricht: Esta declaración se basa en el cumplimiento de los productos con las siguientes normas: EN 55022 (CLASS A ITE), August 1994: AMENDMENT A1 (CLASS A ITE), October 2000: LIMITS AND METHODS OF MEASUREMENTS OF RADIO DISTURBANCE CHARACTERISTICS OF INFORMATION TECHNOLOGY EQUIPMENT EN 61000-6-2, October 2001: ELECTROMAGNETIC COMPATIBILITY (EMC). PART 6-2: GENERIC STANDARDS - IMMUNITY FOR INDUSTRIAL ENVIRONMENTS. March 1st, 2007 Gryphon™ Dx30 Readers QUICK REFERENCE GUIDE 820001613eng (Rev. D) 9/07 UPDATES AND LANGUAGE AVAILABILITY UK/US The latest drivers and documentation updates for this product are available on Internet. Log on to: www.scanning.datalogic.com I Su Internet sono disponibili le versioni aggiornate di driver e documentazione di questo prodotto. Questo manuale è disponibile anche nella versione italiana. Collegarsi a: www.scanning.datalogic.com F Les versions mises à jour de drivers et documentation de ce produit sont disponibles sur Internet. Ce manuel est aussi disponible en version française. Cliquez sur : www.scanning.datalogic.com D Im Internet finden Sie die aktuellsten Versionen der Treiber und Dokumentation von diesem Produkt. Die deutschsprachige Version dieses Handbuches ist auch verfügbar. Adresse : www.scanning.datalogic.com E En Internet están disponibles las versiones actualizadas de los drivers y documentación de este producto. También está disponible la versión en español de este manual. Dirección Internet : www.scanning.datalogic.com CONNECTIONS WEDGE RS232 PEN USB COMPLIANCE LED CLASS Class 1 LED product. This product conforms to EN60825-1:2001. FCC COMPLIANCE Modifications or changes to this equipment without the expressed written approval of Datalogic could void the authority to use the equipment. This device complies with PART 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference which may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. POWER SUPPLY This device is intended to be connected to a UL Listed/CSA Certified computer which supplies power directly to the reader or else be supplied by a UL Listed/CSA Certified Power Unit marked “Class 2” or LPS power source rated 5 V, minimum 270 mA, which supplies power directly to the reader via the power connector of the cable. WEEE COMPLIANCE DISCONNECTING THE CABLE PATENTS This product is licensed under the following U.S. patent: 6,158,661 This product is covered by one or more of the following patents: U.S. patents 5,992,740; 6,305,606 B1; 6,517,003 B2; 6,631,846 B2; 6,712,271 B2; 6,808,114 B1; 6,817,525 B2; and 6,834,806 B2 European patents 851,378 B1; 895,175 B1; 962,880 B1; 997,760 B1; 1,128,315 B1; and 1,164,536 B1 Additional patents pending.

USA keyboard, FIFO enabled, inter-character and inter-code delays disabled, USB keyboard speed normal. DATA FORMAT: code identifier disabled, no field adjustment, code length not transmitted, no header, terminator = ENTER, character replacement disabled. RS232 Standard DEFAULT SETTINGS 9600 baud, no parity, 8 data bits, 1 stop bit, no handshaking, delay disabled, rx timeout 5 sec., ack/nack disabled, FIFO enabled, serial trigger lock disabled. DATA FORMAT: code identifier disabled, no field adjustment, code length not transmitted, no header, terminator = CR-LF, character replacement disabled. WEDGE DEFAULT SETTINGS USA keyboard, caps lock off, caps lock auto-recognition enabled, num lock unchanged, inter-character and inter-code delays disabled. DATA FORMAT: code identifier disabled, no field adjustment, code length not transmitted, no header, terminator = ENTER, character replacement disable. PEN DEFAULT SETTINGS interpret mode, conversion to code 39 disabled, output level normal, idle level normal, minimum output pulse 600 μs, overflow medium, inter-block delay disabled. CODE SELECTION Enabled codes • EAN 8/EAN 13 / UPC A/UPC E without ADD ON check digit transmitted, no conversions • Interleaved 2/5 check digit control and transmission, variable length code; 4-99 characters • Standard Code 39 no check digit control, variable length code; 1-99 characters • Code 128 variable length code; 1-99 characters Disabled codes EAN 128, ISBT128, Code 93, Codabar, pharmaceutical codes, MSI, Plessey, Telepen, Delta IBM, Code 11, Code 16K, Code 49, RSS Codes TECHNICAL FEATURES Gryphon™ Dx30 Electrical Features Power Supply 5 Vdc ± 5% Consumption: Gryphon D130 Gryphon D230 Maximum Operating Sleep mode/USB Suspend 270 mA@ 5 Vdc 165 mA@ 5 Vdc <500 µA@ 5 Vdc 270 mA@ 5 Vdc 210 mA@ 5 Vdc 4 mA@ 5 Vdc Max. Scan Rate 270 scans/sec Reading Indicators LED, Good Read Spot, Beeper Optical Features Sensor CCD solid state (3648 pixels) Illuminator LED array Wavelength 630 ~ 670 nm Max. LED Output Power 0.33 mW LED Safety Class Class 1 EN 60825-1 Gryphon D130-Std 2 ~ 37 cm (20 mils) Gryphon D130-LR 1 ~ 55 cm (20 mils) 2 ~ 25 cm (20 mils) Reading Field Gryphon D230 3 ~ 14 cm (15 mils) for PDF417 code Max. Resolution Gryphon Dx30-Std Gryphon D130-LR 0.076 mm (3 mils) 0.11 mm (4.3 mils) PCS (Datalogic Test Chart) min. 15% Environmental Features Working Temperature 0 °C to + 55 °C / 32° to +131 °F Storage Temperature -20 °C to + 70 °C / -4° to +158 °F Humidity 90% non condensing Drop Resistance IEC 68-2-32 Test ED 1.8 m (5 ft 11 in) Protection Class IP30 Mechanical Features Weight (without cable) about 210 g (7.4 oz) Cable Length 2 m (6 ft 6 in) RESTORE DEFAULT RESTORE DEFAULT Ì$+$*oÎ To change the defaults refer to the “Gryphon™ Dx30/Mx30 Reference Manual”, part number 90ACC1930, or to the Datalogic Aladdin™ Configuration program, both downloadable from the website. INTERFACE SELECTION Select one of the interface codes according to your application. USB INTERFACE SELECTION USB-KBD Ì$+UA03$-:Î USB-KBD - ALT-mode Ì$+UA04$-@Î USB-COM * Ì$+UA02$-4Î USB-IBM-Hand Held Ì$+UA01$-.Î * When configuring USB-COM, the relevant files and drivers must be installed from the USB Device Installation software, which can be downloaded from the web site http://www.scanning.datalogic.com. PEN EMULATION INTERFACE SELECTION PEN Ì$+CP6$-BÎ RS232 INTERFACE SELECTION RS232 Standard Ì$+CP0$-$Î Nixdorf Mode A Ì$+CM2EC0$->Î Fujitsu Ì$+CM1$-ÈÎ ICL Mode Ì$+CM0$-ÃÎ WEDGE INTERFACE SELECTION Wedge IBM AT or PS/2 PCs Ì$+CP500$-aÎ PC Notebook Ì$+CP505$-ÈÎ PC Notebook - ALT mode Ì$+CP508$-2Î IBM AT - ALT mode Ì$+CP507$-+Î Many other interfaces are supported and can be selected from the “Gryphon™ Dx30/Mx30 Reference Manual” available online at www.scanning.datalogic.com. Other supported interfaces: USB: USB-IBM-Table Top; USB-KBD-APPLE WEDGE: IBM XT; IBM SURE1; IBM Terminal 3153; IBM Terminals 31xx, 32xx, 34xx, 37xx; Wyse Terminals ANSI – PC –ASCII – VT220 style Keyboards; Digital Terminal VT2xx/VT3xx/VT4xx; APPLE ADB Bus KEYBOARD NATIONALITY USB-KBD and Wedge users should select one of the following wedge keyboard nationality codes according to your keyboard. Belge Ì$+FJ7$-8Î Deutsch Ì$+FJ3$-$Î English Ì$+FJ4$-)Î Español Ì$+FJ6$-3Î Français Ì$+FJ2$-ÊÎ Italiano Ì$+FJ1$-ÅÎ Japanese Ì$+FJ8$-=Î Svenskt Ì$+FJ5$-.Î USA (Default) Ì$+FJ0$-|Î DATA FORMAT TERMINATORS For your convenience, some common Terminators are given below. For other Header/Terminator selections, Data Format and Advanced Data Format parameters, see the “Gryphon™ Dx30/Mx30 Reference Manual”. CR-LF Ì$+EA120D0A$-ÃÎ Enter Ì$+EA1183$-0Î Tab Ì$+EA1184$-8Î None Ì$+EA10$-dÎ USING GRYPHON™ DX30 READERS Gryphon™ guns automatically scan barcodes at a distance. Simply aim and pull the trigger. Code scanning is performed along the center of the light bar emitted from the reading window. This bar must cover the entire code. Successful scanning is obtained by tilting the scanner with respect to the barcode to avoid direct reflections, which impair the reading performance, see the figure above. Successful reading is signaled by an audible tone plus a good-read green spot. OPERATING TEST Read the TEST codes below. EAN-8 1234 5670 EAN-13 1 234567 000992 Code 39 (Normal) 1 7 1 6 2 Code 128 t e s t Interleaved 2 of 5 0 1 2 3 4 5 6 7 8 4