Datalogic Memor Operation & User’s Manual

Via S. Vitalino, 13 40012 Lippo di Calderara di Reno Bologna - Italy Telephone: (+39) 051-3147011 Fax: (+39) 051-3147205 ©2008-2013 ADC S.r.l. An Unpublished Work - All rights reserved. No part of the contents of this documentation or the procedures described therein may be reproduced or transmitted in any form or by any means without prior written permission of Datalogic ADC, Inc. or its subsidiaries or affiliates ("Datalogic" or “Datalogic ADC”). Owners of Datalogic products are hereby granted a non- exclusive, revocable license to reproduce and transmit this documentation for the purchaser's own internal business purposes. Purchaser shall not remove or alter any proprietary notices, including copyright notices, contained in this documentation and shall ensure that all notices appear on any reproductions of the documentation. Should future revisions of this manual be published, you can acquire printed versions by contacting your Datalogic representative. Electronic versions may either be downloadable from the Datalogic website (www.datalogic.com) or provided on appropriate media. If you visit our website and would like to make comments or suggestions about this or other Datalogic publications, please let us know via the "Contact Datalogic" page. Disclaimer Datalogic has taken reasonable measures to provide information in this manual that is complete and accurate, however, Datalogic reserves the right to change any specification at any time without prior notice. Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries, including the U.S.A. and the E.U. Memor and the Memor logo are trademarks of Datalogic ADC S.r.l. All other brand and product names may be trademarks of their respective owners. Patents This product is covered by one or more of the following patents. Design Pat. Nos: EP 469,143; EP 1,582,024; AU 310182 S; CN 658612; HK 0601962.6; KR 30- 0466667; JP1325117; TW D118829; US D574,830 S. US Pat. Nos: 5,992,740; 6,808,114 B1; 6,997,385 B2; 7,387,246 B2. European Pat. Nos: 681,257 B1; 789,315 B1; 1,128,315 B1; 1,396,811 B1; 1,413,971 B1. Additional patents pending.

Conventions .................................................................................................. vi Reference Documentation ............................................................................ vi Services and Support .................................................................................... vi GENERAL VIEW ........................................................................................ vii 1 INTRODUCTION .......................................................................................... 1 1.1 Datalogic Memor Description ........................................................................ 1 1.2 Available Models ........................................................................................... 3 1.3 Package Contents ......................................................................................... 4 1.4 Inserting a MicroSD Card .............................................................................. 5 1.4.1 Removing the MicroSD Card ........................................................................ 7 1.5 Accessories ................................................................................................... 8 2 BATTERIES AND MAINTENANCE ............................................................. 9 2.1 Charging the Battery Pack ............................................................................ 9 2.2 Replacing the Battery Pack ......................................................................... 12 2.3 Cleaning the Mobile Computer .................................................................... 16 3 CONNECTIONS ......................................................................................... 17 3.1 USB Connection ......................................................................................... 17 3.2 Connection to USB Peripherals .................................................................. 19 3.3 RS232 Connection ...................................................................................... 21 3.4 WLAN Connection ...................................................................................... 22 3.5 WPAN Connections .................................................................................... 24 3.6 Connection Cables ...................................................................................... 25 3.7 Wireless and Radio Frequencies Warnings ................................................ 26 4 USE AND FUNCTIONING .......................................................................... 28 4.1 Startup ........................................................................................................ 28 4.1.1 Using the Stylus .......................................................................................... 30 4.1.2 Using the Joystick ....................................................................................... 31 4.1.3 Windows CE Touch Screen Calibration ...................................................... 32 4.2 Data Capture ............................................................................................... 33 4.2.1 Laser Data Capture ..................................................................................... 34 4.2.2 Imager Data Capture................................................................................... 35 4.3 Description of the Keyboards ...................................................................... 37 4.3.1 Resetting the Datalogic Memor ................................................................... 40 4.4 Status Indicators ......................................................................................... 42 4.4.1 LED Status .................................................................................................. 42 4.4.2 Taskbar ....................................................................................................... 43 4.5 Control Panel .............................................................................................. 44 4.5.1 Data Capture Configuration ........................................................................ 45

4.5.3 Capture ....................................................................................................... 51 4.5.4 Buttons ........................................................................................................ 52 4.5.5 Registry ....................................................................................................... 53 4.5.6 Files Admin ................................................................................................. 54 4.5.7 Wireless Communications ........................................................................... 57 4.5.8 Stylus Calibration ........................................................................................ 58 4.5.9 Audio Settings ............................................................................................. 61 4.6 Connecting to other Computers .................................................................. 63 4.6.1 Windows Mobile® Device Center ................................................................ 63 4.6.2 Bluetooth® Manager Device Setup ............................................................. 64 4.6.3 FTP Server Setup ....................................................................................... 72 4.7 Backup Directory File Management ............................................................ 73 4.8 Datalogic Firmware Utility ........................................................................... 74 4.8.1 Retrieving a Firmware Image Update ......................................................... 74 4.8.2 Installing DFU on the Host PC .................................................................... 75 4.8.3 Updating the Firmware ................................................................................ 76 4.9 Datalogic Configuration Utility ..................................................................... 78 4.10 Datalogic Desktop Utility ............................................................................. 79 4.10.1 Administrative Options (Admin tab) ............................................................. 81 4.10.2 Setting Hot Keys ......................................................................................... 84 4.10.3 Internet Explorer Configuration ................................................................... 88 4.10.4 Modifying Windows Controls ....................................................................... 90 4.10.5 AppSelector Options (AppSelect tab).......................................................... 91 4.11 AppSelector (Application Selector) ............................................................. 94 5 TECHNICAL FEATURES ........................................................................... 95 5.1 Technical Data ............................................................................................ 95 5.2 Reading Diagrams ...................................................................................... 99 6 TEST CODES ........................................................................................... 101 SAFETY REGULATIONS ......................................................................... 105 General Safety Rules ................................................................................ 105 Power Supply ............................................................................................ 105 Laser Safety .............................................................................................. 106 LED Class ................................................................................................. 112 Radio Compliance ..................................................................................... 113 FCC Compliance ....................................................................................... 115 RF Exposure Information (SAR) ............................................................... 116 Industry Canada Compliance .................................................................... 117 SAR Compliance ....................................................................................... 117 WEEE Compliance ................................................................................... 118 China RoHS Pollution Control Logos ........................................................ 120 GLOSSARY .............................................................................................. 121

“User” refers to anyone using a Datalogic Memor mobile computer. “mobile computer” and "Datalogic Memor" refer to Datalogic Memor mobile computer. “You” refers to the System Administrator or Technical Support person using this manual to install, configure, operate, maintain or troubleshoot a Datalogic Memor mobile computer. “Single Dock” refers to the Datalogic Memor Single Slot Dock. The label artworks may be only a draft. Refer to the product labels for more precise information. REFERENCE DOCUMENTATION For further information regarding Datalogic Memor refer to the SDK Help on-Line. SERVICES AND SUPPORT Datalogic provides several services as well as technical support through its website. Please check our website at www.datalogic.com under “Support & Services”, then “Automatic Data Capture”, and click on the links indicated for further information including: - Downloads - Manuals for the latest versions of user manuals and product guides. - Software & Utilities for the latest firmware release for your product. You can also click on the following link for direct access to this section: www.datalogic.com/products_updates. - Service Program for warranty extensions and maintenance agreements. - Repair Centers for a list of authorised repair centers. - Technical Support Automatic Data Capture email form to contact our technical support.

B) Good Read or User Programmable LED C) Charging Status LED D) Speaker E) Scan Key F) Keyboard G) Microphone H) Strap with Stylus Holder I) Laser Safety Label J) Rear Speaker K) ON/OFF Power Key L) Product Label (under battery) M) Battery Cover A F B H D G C E I L K J M

O) DC Charger Connector P) Communication/Charger Connector (through cradle) Q) Mini USB Communication Connector (through cable) * Remove protective film cover before use N O P Q

The Datalogic Memor mobile computer maximizes a compact and light weight form factor for ease of use and shirt pocket convenience without compromising durability. Datalogic Memor features target applications found in field force automation, retail stores, manufacturing and warehouses. The computer architecture of the Datalogic Memor starts with the industry leading XScale™ PXA310 microprocessor. Geared for computing requirements of real time information management and communication. Memory of 128 MB RAM / 256 MB Flash is sized for running multiple simultaneous applications, for managing large databases or the use of thick applications when off-line autonomy is required. The memory storage capacity can be increased through the user accessible Micro SD Card Slot. Microsoft Windows CE 5.0 with Microsoft WordPad and Internet Explorer 6.0 minimizes the operating system size for faster uploads and more storage space. A software development kit (SDK) aids in creating applications for both of these powerful Windows operating systems and alternative environments like Java Virtual Machine. Datalogic Memor provides voice and data wireless communication options to meet the business need. A speaker and microphone equip the Datalogic Memor to handle – VoIP phone calls or push-to-talk conversations. The Summit IEEE 802.11 abg radio’s optimized transmit power and receiver sensitivity result in superior range with a tailored user interface for easy configuration and consistent management. Complimented by a CCX v4 security certification from Cisco, the Datalogic Memor provides infrastructure compatibility focused on enterprise requirements for encrypted communication and seamless roaming. Client side applications leverage internet protocol connections for hands-free voice picking and push to talk communications. Bluetooth® Wireless Technology connects headsets, printers and other peripherals while eliminating cumbersome wires and costly replacement of broken or damaged cables. Two scanner options optimize the Datalogic Memor for the application needs. A laser scanner tackles intensive applications where speed and a wide depth of field are essential. Datalogic’s patented Green Spot good read feedback makes Datalogic Memor’s laser scanner intuitive while reducing errors. The 2D scan engine option leverages picture technology to capture a wide range of Linear, Stacked, and 2D codes while also providing the flexibility to capture a signatures or drivers license. Digital image decoding software reduces failed reads due to damaged and poor quality barcodes while enabling the user to scan from almost any orientation.

2 1 Durability ratings protect the computing investment against accidental drops and occasional exposure to liquids and dust. A touch color display provides an easy to read interface in a wide range of lighting conditions. The phone keyboard layout and four direction joystick increase associate efficiency. Push button battery lock provides an easy to locking mechanism for quick, no hassle battery exchanges. Rechargeable Lithium polymer batteries in two sizes customize capacity to the application. Charging cradles include a communication cradles for RS232 and USB. A powered vehicle dock and power adapter cable extend charging capabilities onto the road. Powered by Wavelink® device maintenance and management tools makes the Datalogic Memor a simple device to both deploy and maintain. Datalogic Firmware, Desktop and Configuration Utilities complete the package with unprecedented ability to customize device configuration to the use environment or process. Combined these tools streamline deployment and management activities while providing developer tools to further customize units for specific applications.

equipped with. All options are listed below: • communication options: 802.11 abg radio, Bluetooth® • data capture options: laser, imager • operating system: Windows CE 5.0, Windows Mobile 6.1 For further details about the Datalogic Memor models refer to the web site: http://www.datalogic.com. For further information regarding Windows CE refer to the website: http://www.microsoft.com/windowsembedded. The currently available models are: • 944201016 DL-Memor+Batch+1DGS+CE5 Datalogic Memor, Batch, 128MB RAM/256MB Flash, 23-key Numeric, Std Laser with Green Spot, CE 5.0 • 944201038 DL-Memor+802.11+BT+1DGS+CE5 Datalogic Memor, 802.11 abg CCX V4, Bluetooth, 128MB RAM/256MB Flash, 23- key Numeric, Std Laser with Green Spot, CE 5.0 • 944201039 DL-Memor+802.11+BT+2D+CE5 Datalogic Memor, 802.11 abg CCX V4, Bluetooth, 128MB RAM/256MB Flash, 23- key Numeric, Std 2D Imager, CE 5.0 • 944201040 DL-Memor+802.11+BT+1DGS+WM6.1 Datalogic Memor, 802.11 abg CCX V4, Bluetooth, 128MB RAM/256MB Flash, 23-key Numeric, Std Laser with Green Spot, WM 6.1 • 944201041 DL-Memor+802.11+BT+2D+WM6.1 Datalogic Memor, 802.11 abg CCX V4, Bluetooth, 128MB RAM/256MB Flash, 23-key Numeric, Std 2D Imager, WM 6.1

4 1 1.3 PACKAGE CONTENTS The Datalogic Memor package contains: − 1 Datalogic Memor mobile computer − 1 AC/DC power supply − 1 EU plug adapter − 1 UK Plug Adapter − 1 standard Mini USB cable − 1 extensible stylus − 1 rechargeable standard battery pack + cover − 1 hand-strap with stylus holder − 1 Quick Start Guide − 1 Safety and Regulatory Addendum − 1 Wavelink Avalanche Insert − 1 End User License Agreement (EULA) Sheet Any other packages will contain the accessories necessary for the Datalogic Memor connection to the host computer and to the network: the cradle, one or more connection cables. Remove all the components from their packaging; check their integrity and compare them with the packing documents. Keep the original packaging for use when sending products to the technical assistance center. Damage caused by improper packaging is not covered under the warranty. CAUTION Rechargeable battery packs are not initially fully charged. Therefore the first operation to perform is to charge them. See section 2.1. NOTE

The Datalogic Memor supports microSD memory cards. To access the microSD card slot and insert the card, proceed as follows: 1. Turn off the Datalogic Memor. 2. Press the latch release button and pull the latch down: 3. Remove the cover and the battery pack, then open the microSD card slot by pulling up the locking plate:

6 1 4. Shift the cardholder to the left and then pull it up; insert the microSD card with the written part upward: 5. Lock the card into place by pushing the cardholder down and then shifting it to the right; pull the locking plate down: 6. Close the battery cover properly, by pressing the latch release button and pulling the latch down.

To remove the microSD card, follow the steps above to access the SD area, and remove it from its slot. Follow proper ESD precautions to avoid damaging the microprocessors in the Datalogic Memor or the microSD card itself. Proper ESD precautions include, but are not limited to, working on an ESD mat and ensuring that the operator is properly grounded. Do not force the card. If you feel resistance, remove the card, check the orientation, and reinsert it. Do not use the microSD card slot for any other accessories. CAUTION

8 1 1.5 ACCESSORIES  Cradles 94A151111 DL-Memor Single Cradle w Aux. Slot 94A151121 Dock Memor Vehicle w Power Adapter 94A151122 DL-Memor Single Ethernet-Usb_Host Cradle 94A151123 DL-Memor Multi Battery Charger  Batteries 94ACC1367 DL-Memor Large Capacity Battery CVR2 94ACC1368 DL-Memor Standard Battery CVR2  Power Supply 94ACC1324 PG5-30P35 AC/DC Power Supply EU/USA Plug 94ACC1334 PG5-30P35 AUS. Plug Adapter (10pcs) 94ACC1335 PG5-30P35 UK Plug Adapter (10pcs) 94ACC1339 PG5-30P35 EU. Plug Adapter (10pcs) 94ACC1369 DL-Memor Alkaline Adapter CVR2  Cables 94A051016 CAB-421 USB Type A-B-Mini Straight 94A051022 WIN-NET Serial CAB (HRS ST40x-18S-CV) 94A051024 USB A (4 pin F) to Mini A (5 pin M) 94A051966 Cable Memor 12 TO 24 V Power Adapter  Various 94ACC1328 DL-Memor Stylus Pen (10pcs) 94ACC1365 Headset Memor 94ACC1366 Softcase Memor w/Swivel Use only a Datalogic approved power supply and cables. Use of an alternative power supply will invalidate any approval given to this device and may be dangerous. NOTE

9 2 2 BATTERIES AND MAINTENANCE Rechargeable backup batteries and battery packs are not initially fully charged. Therefore the initial operation to perform is to charge them. See below. NOTE Annual replacement of rechargeable battery pack avoids possible risks or abnormalities and ensures maximum performance. CAUTION 2.1 CHARGING THE BATTERY PACK The battery pack autonomy varies according to many factors, such as the frequency of barcode scanning, RF usage, battery life, storage, environmental conditions, etc. NOTE The battery icon on the Taskbar indicates when the battery pack is low. It is possible to recharge the battery pack by connecting the power supply directly to the Datalogic Memor. Alternatively, it is also possible to recharge the battery pack by inserting the Datalogic Memor into the single slot dock or the multi battery charger. Moreover recharging is possible by USB Direct connection with the host computer, but with longer charging times and only if the mobile computer off. During the charging process the LED positioned at the right side of the display is red constant. Once the charging process has been completed this LED is green constant (see par. 4.4). The stand alone battery pack may be recharged outside a Datalogic Memor using the spare battery charging slot on the back of the single slot dock or the multi battery charger.

10 2 Do not use the Datalogic Memor until batteries are charged for minimum 4 hours. CAUTION Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. CAUTION Il y a risque d’explosion si la batterie est remplacée par une batterie de type incorrect. Mettre au rebut les batteris usagées confor mément aux instructions. CAUTION Even if the storage temperature range is wider, in order to achieve the longest battery life, store the terminal and the spare batteries between 20 to 30º C (68 to 86º F). Datalogic Memor (including spare battery) should be charged at an ambient temperature between 0° to +40 °C (+32° to +104 °F) to achieve the maximum charging rate. Never charge the main device or spare batteries in a closed space where excessive heat can build up. NOTE The battery level may display incorrectly for several minutes after the Datalogic Memor is disconnected from its charger if the charging cycle is not completed. NOTE

11 2 The Datalogic Memor may get warm during charging; this is normal and does not mean a malfunction. NOTE Use only a USB-IF compliant USB port as a charging source. NOTE

12 2 2.2 REPLACING THE BATTERY PACK To correctly replace the battery pack, proceed as follows. 1. Turn off the Datalogic Memor. 2. Press the latch release button and pull the battery latch down : 3. Remove the cover and the battery pack.

13 2 4. Install the new battery pack, first insert the bottom (contacts) side, then the upper side: 5. Press the latch release button and pull the battery latch down to reinsert the cover WARNING Installing, charging and/or any other action should be done by authorized personnel and following this manual. The battery pack may get hot, explode, ignite, and/or cause serious injury if exposed to abusive conditions. If the battery pack is replaced with an improper type, there is risk of explosion and/or fire. Do not place the battery pack in or near a fire or other heat source; do not place the battery pack in direct sunlight, or use or store the battery pack inside unventilated areas in hot weather; do not place the battery pack in microwave ovens, in clothes dryers, in high pressure containers, on induction cook surfaces or similar devices. Doing so may cause the battery pack to generate heat, explode or ignite. Using the battery pack in this manner may also result in a loss of performance and a shortened life expectancy. Use only a Datalogic approved power supply. The use of an alternative power supply will void the product warranty, may cause product damage and may cause heat, an explosion, or fire. The area in which the units are charged should be clear of debris and combustible materials or chemicals. Do not use the battery pack of this terminal to power devices other than this mobile computer.

14 2 WARNING Immediately discontinue use of the battery pack if, while using, charging or storing the battery pack, the battery pack emits an unusual smell, feels hot, changes colour or shape, or appears abnormal in any other way. Do not short-circuit the battery pack contacts connecting the positive terminal and negative terminal. This might happen, for example, when you carry a spare battery pack in your pocket or purse; accidental short–circuiting can occur when a metallic object such as a coin, clip, or pen causes direct connection of the contacts of the battery pack (these look like metal strips on the battery pack). Short– circuiting the terminals may damage the battery pack or the connecting object. Do not apply voltages to the battery pack contacts. Do not pierce the battery pack with nails, strike it with a hammer, step on it or otherwise subject it to strong impacts, pressures, or shocks. Do not disassemble or modify (i.e. bend, crush or deform) the battery pack. The battery pack contains safety and protection devices, which, if damaged, may cause the battery pack to generate heat, explode or ignite. In case of leakage of liquid from the battery, avoid contact with liquid the skin or eyes. If the contact occurs, immediately wash the affected area with water and consult a doctor. Do not solder directly onto the battery pack. Do not expose the battery pack to liquids. Avoid any knocks or excessive vibrations. If the device or the battery is dropped, especially on a hard surface, you should take it to the nearest Authorised Repair Centre for inspection before continuing to use it. Do not replace the battery pack when the device is turned on. Do not remove or damage the battery pack’s label. Do not use the battery pack if it is damaged in any part. Battery pack usage by children should be supervised. Collect and recycle waste batteries separately from the device in compliance with European Directive 2006/66/EC, 2011/65, 2002/96/EC and subsequent modifications, with US and China regulatory laws and regulations about the environment.

15 2 In order to maximize operating autonomy, the Datalogic Memor checks its battery level at all times. If the battery is not sufficiently charged, the Datalogic Memor will not turn on when the ON/OFF Power button is pressed. In this case, either substitute a sufficiently charged battery, insert the Datalogic Memor into a powered cradle, or plug it into a wall charger. NOTE To maximize battery life, turn off radios when they are not needed. NOTE

16 2 2.3 CLEANING THE MOBILE COMPUTER Periodically clean the Datalogic Memor with a slightly dampened cloth. Do not use alcohol, corrosive products or solvents.

a host computer to transfer data through the USB interface. Key: A Host computer C Datalogic Memor B Standard Mini USB cable Connection through the cable is compliant to 2.0 USB standard. NOTE A B C

18 3 The Single Dock can be connected to the host computer by any standard mini USB cable. Once the host computer has been turned on, insert the Datalogic Memor mobile computer into the cradle. Key: A Host computer C Single Slot Dock B Standard Mini USB cable D Power Supply (only necessary for battery charging†) Connection through the cradle complies to USB 1.1 standard. NOTE The actual data transfer speed can be appreciably lower than the maximum theoretical speed. NOTE B D C A

You can connect the Datalogic Memor to a standard 101-key USB keyboard or to a standard USB flash memory device. Connect the terminal to a standard A (4 pin female) to mini A (5 pin male) USB cable. For all these devices maximum current draw must be less than 100mA. Key: A Keyboard with USB interface C 94A051024 (Standard A to Mini A USB cable) B Datalogic Memor Key: A USB hard drive/ external memory source C 94A051024 (Standard A to Mini A USB cable) B Datalogic Memor Connect first the USB peripheral to the cable, and then the cable to the Datalogic Memor. NOTE A B C A B C

20 3 The Datalogic Memor works with most of the mentioned USB peripherals. Datalogic cannot guarantee the interoperability of Datalogic Memor with all devices on the market. NOTE Connection is compliant to USB 1.1 standard. NOTE The actual data transfer speed can be appreciably lower than the maximum theoretical speed. NOTE

transfer data through the RS232 interface: Key: A Host computer C Datalogic Memor B 94A051022 WIN-NET (HRS ST40X-18S-CV) The Single Slot Dock can be connected to the Host by means of a standard null modem cable such as Datalogic 94A051020 CAB-427 for 9-pin connections. Once the host computer has been turned on, insert the Datalogic Memor mobile computer into the dock. Key: A Host Computer C Single Slot Dock B 94A051020 CAB-427 RS232 Null Modem Cable D Power Supply (only necessary for battery charging)∗ ∗In this case the power supply is only necessary for battery charging. Insert the power supply plug into the power jack on the base of the cradle and attach the power supply to a power outlet. A B C A B C D

22 3 3.4 WLAN CONNECTION Datalogic Memor 802.11 abg radio models can communicate with the host using the on-board Wi-Fi radio and an Access Point connected to a network. Key: A) Datalogic Memor B) Access point C) Host – Application Server A B C A

energy, you can switch it off using the Wireless Communications tab. NOTE Suspending the terminal powers off the 802.11 a/b/g radio and drops the radio connection. When the terminal resumes, depending on the radio power mode and security protocol selected, it may take up to 30 seconds for the 802.11 a/b/g radio driver to re-associate the radio to the network. NOTE Area coverage and radio performance may vary, due to environmental conditions, access points types or interference caused by other devices (microwave ovens, radio transmitters, etc.). NOTE In case of heavy usage the Datalogic Memor may get warm; this is normal and does not mean a malfunction. NOTE

24 3 3.5 WPAN CONNECTIONS Datalogic Memor Bluetooth® models can communicate with a Bluetooth® device, such as a printer, within a range of 10 m, using the on-board Bluetooth® module. Key: A) Datalogic Memor B) Bluetooth® printer In order to extend battery life, the Bluetooth® module is off by default. If you need to have Bluetooth® working, the module must be powered on using the Wireless Communications tab (see par. 4.5.7), and perform the Discovery procedure (see par. 4.6.2). NOTE Suspending the terminal powers off the Bluetooth® radio and drops the piconet (Bluetooth® connection). When the terminal resumes, it takes approximately 10 seconds for the Bluetooth® radio driver to re- initialize the radio. NOTE Area coverage and Bluetooth® radio performance may vary, due to environmental conditions or interference caused by other devices (microwave ovens, radio transmitters, etc.). NOTE A B

94A051022 WIN-NET SERIAL CAB (HRS ST40x-18S-CV) RXD TXD 3 10 2 9 4 DSR Datalogic Memor™ side HOST/PC side 9-pin (female) 1 6 13 15 TXD RXD DCD DTR RI RI CTS RTS 7 12 8 11 RTS CTS DTR 14 8 9 GND GND 7 5 DCD DSR  Power Supply Polarity: GND VEXT

26 3 3.7 WIRELESS AND RADIO FREQUENCIES WARNINGS Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications or attachments could damage the product and may violate laws and regulations. WARNING Most modern electronic equipment is shielded from RF signals. However, certain electronic equipment may not be shielded against the RF signals generated by the Datalogic Memor. WARNING Datalogic recommends persons with pacemakers or other medical devices to follow the same recommendations provided by Health Industry Manufacturers Associations for mobile phones. Persons with pacemakers: • Should ALWAYS keep this device more than twenty five (25) cm from their pacemaker and/or any other medical device; • Should not carry this device in a breast pocket; • Should keep the device at the opposite side of the pacemaker and/or any other medical device; • Should turn this device OFF or move it immediately AWAY if there is any reason to suspect that interference is taking place. • Should ALWAYS read pacemaker or any other medical device guides or should consult the manufacturer of the medical device to determine if it is adequately shielded from external RF energy. In case of doubt concerning the use of wireless devices with an implanted medical device, contact your doctor. WARNING

posted in these areas instruct you to do so. Hospitals or health care facilities may use equipment that could be sensitive to external RF energy. WARNING RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles. Check with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer of any equipment that has been added to your vehicle. WARNING An air bag inflates with great force. DO NOT place objects, including either installed or portable wireless equipment, in the area over the air bag or in the air bag deployment area. If a vehicle’s wireless equipment is improperly installed and the air bag inflates, serious injury could result. WARNING Turn off the device when in any area with a potentially explosive atmosphere. Observe restrictions and follow closely any laws, regulations, warnings and best practices on the use of radio equipment near fuel storage areas or fuel distribution areas, chemical plants or where any operation involves use of explosive materials. Do not store or carry flammable liquids, explosive gases or materials with the device or its parts or accessories. Areas with a potentially explosive atmosphere are often, but not always, clearly marked or shown. Sparks in such areas could cause an explosion or fire, resulting in injury or even death. WARNING To safely disable the radio modules (WiFi/BT) do not power off the mobile computer, but use the Wireless Communications tab (see par.4.5.7). WARNING

28 4 4 USE AND FUNCTIONING The use of the Datalogic Memor depends on the application software loaded. However there are several parameters that can be set and utilities that can be used to perform some basic functions such as data capture, communications, file management, etc 4.1 STARTUP The Datalogic Memor turns on when the battery pack or the external supply is inserted and the ON/OFF Power button is pressed. After the battery pack is installed, use the [ON/OFF] key to turn the mobile computer on and off. As soon as the mobile computer is on, the Windows CE 5.0 desktop will appear on the screen. Wait a few seconds before starting any activity so that the mobile computer completes its startup procedure. Desktop Control Panel Use the stylus (par. 4.1.1) or joystick (par. 4.1.2) as suggested to select icons and options. The mobile computer goes into power-off (low power with display and keyboard backlight off), when it is not used for more than a programmable timeout, which is

29 4 defined in the POWER applet of the Control Panel. In this mode it can be awakened (resuming operation) by the [ON/OFF] key. The mobile computer can also be awakened or suspended programmatically. NOTE

30 4 4.1.1 Using the Stylus The stylus selects items and enters information. The stylus functions like a mouse. Double Tap: Double tap the screen with the stylus to open items and select options. Drag: Hold the stylus on the screen and drag across the screen to select text and images. Drag in a list to select multiple items. Tap-and-hold: Tap and hold the stylus on an item to see a list of actions available for that item. On the pop-up menu that appears, tap the action you want to perform. To recalibrate the touch screen use the Stylus applet (see par. 4.6.7). Use only original Datalogic styluses supplied with the product itself. In harsh applications, use of screen protectors should be taken into consideration, in order to extend the touch screen operating life. To prevent damage to the screen, do not use sharp devices or any device other than the Datalogic provided stylus. Do not apply too much pressure when touching the screen. For applications where an intensive use of the touch screen is foreseen, please consider that touch screen components are subject to progressive wear. CAUTION

31 4 4.1.2 Using the Joystick The joystick selects items and enters information. The joystick can work like the directional arrow keys of a PC keyboard or can function like a mouse and control the mouse pointer. It is possible to switch between the two functioning modes by pressing blue modifier + BKSP keys in sequence. Arrow Keys Mode (default): Move in the four directions: move forwards, backwards, upwards or downwards within text fields, scroll through a Menu list or browse among folder files. Press down: selects the current function (like the Enter key). Mouse Mode: Move in the four directions: move the mouse pointer forwards, backwards, upwards or downwards. Press down: like the left click of the mouse.

32 4 4.1.3 Windows CE Touch Screen Calibration In Windows CE, at the very first Datalogic Memor startup, following a clean boot to restore the Registry to default values, the mobile computer startup (see par. 4.1) is preceded by the touch screen calibration screen. The user must calibrate the touch screen (see par. 4.5.7) Touch Screen Calibration Screen

33 4 4.2 DATA CAPTURE To capture data tap Start > Settings > Control Panel > double tap Decoding: To configure and enable data capture parameters refer to par. 4.5.1.

34 4 4.2.1 Laser Data Capture To scan barcodes, point the Datalogic Memor laser model onto the code from a distance within the reading range while pressing the SCAN key. The lighted band emitted by the laser must completely cross the barcode as shown in the figure below. If the scan has taken place correctly: − the Good Read LED glows steadily Green for a configurable time; − if enabled, the Good Read Beep plays; − if enabled, the GreenSpot projects a green spot onto the bar code image. Remove the protective film cover over the data capture window before use. NOTE

35 4 4.2.2 Imager Data Capture The Datalogic Memor Imager captures a picture of the entire bar code. The omni- directional scanning does not require that the operator orient the bar code to align with the scan pattern. To read a 1D or 2D code, simply point the Datalogic Memor Imager model onto the code and press the SCAN Key or the pistol trigger. The Datalogic Memor Imager uses an intelligent aiming system pattern, similar to those on cameras, indicating the field of view, which should be positioned over the code: Aiming System If the aiming system pattern is centered over the entire symbology as shown in the following figure, either wait for the timeout or release the Scan key or the trigger to capture the image. A red beam illuminates the code, which is captured and decoded. You will get a good read.

36 4 Linear barcode 2D Matrix symbol ÌBX3ÉÎ Relative Size and Location of Aiming System Pattern The field of view changes its size as you move the reader closer or farther away from the code. The field of view indicated by the aiming system pattern will be smaller when the Datalogic Memor Imager is closer to the code and larger when it is farther from the code. Symbologies with smaller bars or elements (mil size) should be read closer to the unit. Symbologies with larger bars or elements (mil size) should be read farther from the unit. (See par. 5.1 for further details). If the scan has taken place correctly: − the Good Read LED glows steadily Green for a configurable time; − if enabled, the Good Read Beep plays.

37 4 4.3 DESCRIPTION OF THE KEYBOARDS The Datalogic Memor comes with a 23-key alphanumeric keyboard + ON/OFF key + joystick.

38 4 Main Keys Function KEY FUNCTION The SCAN key starts data capture. The joystick lets you move forwards, backwards, upwards or downwards, scroll through a Menu list, browse among folder files or select functions if pressed down. It can work in two functioning modes: Arrow Keys Mode and Mouse Mode. It’s possible to switch between them by pressing blue modifier + BKSP keys in sequence (see par. 4.1.2). Yellow modifier (toggle key): when pressed before a standard key, it enables the character or function printed in yellow above the key. Blue modifier (one shot key): when pressed before a standard key, it enables the character or function printed in blue above the key The ON/OFF Power button powers the Datalogic Memor ON or OFF. It is placed on the upper left side of the terminal. The ALPHA key is used to alternate numeric and alphanumeric use of the 10 numeric keys. Special Function Icons ICON FUNCTION After a yellow modifier key press, it opens the Start menu. After a yellow modifier key press, it opens the file manager. After a yellow modifier key press, it switches ON/OFF the display backlight. ICON FUNCTION After a yellow modifier key press, it opens the Start menu. After a yellow modifier key press, it opens the file manager. After a yellow modifier key press, it switches ON/OFF the display backlight. After a blue modifier key press, it switches ON/OFF the keyboard backlight.

40 4 4.3.1 Resetting the Datalogic Memor There are several reset methods for the Datalogic Memor. A warm boot terminates an unresponsive application and clears the working RAM, but preserves both the file system and the registry. A cold boot forces all applications to close and clears working RAM and files not resident on the persistent flash memory. Registry is restored from persistent memory if available or returned to factory default. A clean boot restores the Datalogic Memor to factory configuration: registry and file system return to factory default. Warm Boot A warm boot closes all applications, clears the working RAM, but preserves the file system and registry. If an application "hangs" initiate a warm boot to terminate the application. To perform a warm boot, press these keys simultaneously: Cold Boot A cold boot is a complete reset of the Datalogic Memor in which all applications are forcibly closed and RAM is completely cleared. Registry is restored from persistent memory if a saved copy is available (see 4.7.2) and RAM file system completely erased. You will lose any applications and data (registry too) which are not stored in persistent flash memory. A cold boot is necessary when the Windows CE operating system locks up and the warm boot command does not work. To perform a cold boot, press these keys simultaneously:

41 4 Clean Boot A clean boot is a cold boot that causes the device to be restored to factory configuration. The Datalogic Memor will reset to its factory configuration, clear the working RAM and initialize the file system. You will lose any applications and data stored in persistent flash memory. At the next startup the system will ask to recalibrate the touch screen. To perform a clean boot, follow these steps: 1. Perform a Cold Boot (see Cold Boot). 2. Quickly release all the keys when the screen goes black. 3. Within 1 second press and hold down the Esc and 0 keys until the left orange led starts blinking. 4. Release the Esc and 0 keys. 5. Enter 1 to proceed with the Clean Boot sequence. Enter 0 to cancel the Clean Boot and proceed with a Cold Boot. Warm Boot Cold Boot Clean Boot Registry Preserved Restored from flash (if available) Factory default Flash Disk (Backup Folder) Preserved Preserved Clean disk RAM File System Preserved Reinitialized (factory default) Factory default

42 4 4.4 STATUS INDICATORS 4.4.1 LED Status The Datalogic Memor provides two different LEDs signaling the mobile computer status. LED STATUS Good Read and General Purpose (left side) Green It is constant for a configurable time to signal that a successful read has occurred. Green/ Red It is also available to the application program. Charging Status (right side) Green It is solid once the charging process has been completed (full charge). Red It is solid while charging. Off if the charging stops due to high temperature, failures etc. Orange it is constant while in pre-charge status

43 4 4.4.2 Taskbar Windows CE Taskbar The Taskbar provides information about the time, the battery level, the keyboard function, and the decoding status. ICONS DESCRIPTION Time and Battery Icons It displays the time. In Windows CE, they are representative of five different icons indicating the battery level. The icon is partially green when the power left is >20% and partially red colored when the power left is <20%. It indicates that the battery is charging Keyboard Status Icons It indicates that the blue FUNC key has been pressed and is going to affect the next key press. It indicates that the yellow FUNC key has been pressed and is going to affect the next key press. It indicates that the ALPHA key has enabled the selection of the characters printed in orange. It indicates the NUMERIC key selection, the ALPHA key has not been pressed. It indicates that the ALPHA key has enabled the selection of the characters printed in orange and the Capslock is active. It indicates that the keyboard is locked. Decoding Status Icons It indicates that the decoder is active (green), not active (grey).

44 4 4.5 CONTROL PANEL From the Start menu, tap Settings then Control Panel. Windows CE Control Panel

45 4 4.5.1 Data Capture Configuration From the Windows CE Taskbar, tap the "Decoding" icon to open a drop–down menu. By selecting the Info item from this drop-down menu you can access information about the Scanner and the Software; the Configure item opens the configuration applet (Data Capture Configuration Window), while Capture accesses the data capture applet (Data Capture Window), which enables code reading. The last menu item (Wedge) enables Wedge Emulation. Decoding can also be accessed from the Control Panel.

46 4 4.5.2 Configure The Configuration applet contains the barcode scanning configuration parameters in a directory tree structure. The available barcode parameters are divided into two groups: Reader Parameters and Scan Parameters. The Reader Parameters depend on the type of scanner module installed on the mobile computer and allow barcode configuration (i.e. enable/disable Code 39, check digit control, etc.). The Scan Parameters are common to all scanner modules and allow control of the scanning device (i.e. beeper control, LED control, laser timeout, etc.). Each Data Capture screen window corresponds to a branch of the tree, and the name of the current branch is displayed at the bottom of each screen window. Data Capture Configuration Window The screen format shows two columns where the left column indicates branches or parameters. Branches have three dots in the right column (...). You can navigate through the tree structure using the stylus or keyboard arrows directly on the item field or from the menu. Parameters have their corresponding current values in the right column. You can edit parameter values using the stylus or keyboard arrows directly on the item field or from the menu. To change a value for example, select the line of the value to be changed, choose Edit from the Parameter Menu then choose a new value from the values listed in the box (see following figures).

47 4 Selecting Data Capture Setup Parameters Alternatively using the stylus, you can tap once directly on the value on the right column; continue tapping until the desired value is reached. To activate a new configuration select the File ->Save Menu to send the new configuration to the barcode decoding software and save the new configuration. This will save the configuration to non-volatile memory preventing loss at the next system reset. Reader Parameters The barcode reading parameters and values are dependent upon the type of scanner module mounted in your mobile computer. For a detailed list of parameters and of their configuration procedures, please refer to the SDK Help file on the CD. Scan Parameters The Scan Parameters are common to all scanner modules and allow control of the scanning device. The Scan parameters are described as follows: ScanTimeout: the maximum time, in milliseconds, during which the scanner remains on without decoding any barcode. BeepType: if set to dual tone, the good read beep is a sequence of high and low pitch sounds. If set to monotone, the beep is a single pitch sound. BeepDuration: the time interval, in milliseconds, during which the beeper will sound when the scanner reads a code. To disable the beeper, set this value to 0.

48 4 BeepFrequency: determines the frequency in Hertz of the beeper. GoodReadSound: is the beep sound emitted when the scanner reads a code. LedDuration: the length of the good-read led pulse, in milliseconds. LedPulses: the number of times the good-read led pulse is emitted when the scanner reads a code. ContinuousMode: disables the effect of the ScanTimeout parameter. KeyboardEmulation: if enabled all scanned data are transformed into keyboard events and can therefore be displayed and saved to a file as if input from the mobile computer keyboard. SoftTrigger: when enabled, the laser can be turned on/off by the application software. ScanAlwaysOn: enables the scanner for barcode reading independently from the application software. GreenSpotDuration: determines the duration (measured in milliseconds) of the green spot feedback, which provides a “good read” green dot directly on the code, where the operator usually tends to be looking. NotPrintableChar: if set to “Remove”, all not printable characters included in the scanned data are deleted and the final barcode will include only printable characters. ScanButton: enables/disables the scan button. If the scan button is disabled, the reader can be triggered under software control.

49 4 Default Settings The following tables contain the default values for the major barcode setup parameters, according to the type of scan engine mounted on the mobile computer. For a complete list of parameters and of their configuration procedures, please refer to the SDK Help file on the CD. SCAN PARAMETERS LASER MODELS IMAGER MODELS ScanTimeout 5000 Not available BeepType Dual tone Not available BeepDuration 20 Not available BeepFrequency 2000 Not available GoodReadSound Beep Beep.wav LedDuration 200 ms 200 ms LedPulses 1 1 ContinuousMode Disabled Disabled KeyboardEmulation Enabled Enabled SoftTrigger Enabled Enabled ScanAlwaysOn Disabled Disabled GreenSpotDuration 1000 Not available NotPrintableChar Leave Leave ScanButton Enabled Enabled BARCODE SYMBOLOGY SPECIFIC READER PARAMETERS LASER MODELS IMAGER MODELS UPC A Enabled ∗ UPC E Enabled EAN 8 Enabled EAN 13 Enabled UPC/EAN/JAN Not available Enabled Code 39 Enabled Enabled Code 39 Full ASCII Disabled Disabled Code 32 Disabled Not available 2/5: Interleaved Enabled Enabled 2/5: Industrial Disabled Not available 2/5: Matrix Disabled Not available Code 128 Enabled Enabled EAN 128 Enabled Disabled CODABAR Disabled Enabled ∗ In the Imager models these codes may only be enabled or disabled as a group by the UPC/EAN/JAN family selection (see a few lines below).

50 4 BARCODE SYMBOLOGY SPECIFIC READER PARAMETERS LASER MODELS IMAGER MODELS MSI Disabled Not available Plessey Disabled Not available Code 93 Disabled Enabled Code 11 Disabled Not available GS1 Databar Disabled Enabled GS1 Databar Omnidirectional Disabled Not available GS1 Databar General Not available Enabled GS1 Databar Limited Disabled Enabled GS1 Databar Expanded Disabled Enabled PDF - 417 Not available Enabled Data Matrix Not available Enabled QR Not available Enabled POSTNET Not available Disabled∗ PLANET Not available Japan Post Not available Australia Post Not available KIX Code Not available Royal Mail Code (RM4SCC) Not available ∗ These codes may be enabled individually but are disabled as a group.

51 4 4.5.3 Capture The Data Capture applet (Capture) enables code reading. Data Capture Window Data Capture can also be enabled through the Configuration applet by selecting File ->Scanner from the main menu, or by enabling the parameter Scan Always On in the Scan Parameters branch. Enabling the Data Capture

52 4 4.5.4 Buttons You can use the Buttons Tab to associate specific keys, such as -, with specific applications. From the control panel main window, double tap the DL Buttons icon. On the Buttons tab, customize the program hardware buttons to launch your most used applications. Select the button you want to assign a function to, and then browse to select the application to be assigned. You can also select to wake up the terminal by the SCAN key.

53 4 4.5.5 Registry The Registry stores information that are necessary to configure the system for applications and hardware devices. The Registry also contains information that the operating system continually references to during operation. From the Control Panel, double tap the “Registry Admin” icon. Two functions are available: - Save Registry allows permanently saving the Windows configuration (example: custom configuration of screen desktop background color, or network adapter configuration) to non-volatile memory (‘Save’ button). - Restore Default Registry allows restoring the initial factory default configuration (‘Restore Default’ button). After restoring the factory default configuration, you must perform a warm boot.

54 4 4.5.6 Files Admin The Files Admin applet enables control of the permanence of files in the Windows CE System Folder. Files Admin Main Window Two functions are available: Save Session: with this button all files will be permanently saved in the \Windows directory in non-volatile memory. This function guarantees the steady maintenance of every file produced during the current working session - even of sub-directories and relevant files - with the exception of the files belonging to the FLASH image. These current working session files will be backed-up in the \Backup\Windows directory. At the next cold boot, the files previously saved in the \Backup\Windows directory will be restored to the Windows directory. Safe Setup: with this button, the installation of software programs will be saved to non-volatile memory (Backup directory). Before doing this, it will be checked that the Backup directory has enough space to save the files. If the directory space is not enough, an error message will be shown and the program will exit the Safe Setup function.

55 4 Two activating procedures are available for Safe Setup: - Select an installation file (for example, a .CAB cabinet file) from the Safe Setup mask. Safe Setup First Mask Then select \Windows or a relevant sub-directory in the path box. Then, Safe Setup will recognize the new files and directories present in the \Windows directory, and will copy them to the \Backup\Windows directory. At the next cold boot, these files will be restored (see par. 4.9). - Simply skip the first mask either by closing it or by pressing the ESC key. When it closes, a new mask will pop up: it will enable any type of installation (even remote ones like ActiveSync® installations). Make sure the installation directory is \Windows or one of its sub-directories. After installation, tap OK: Safe Setup will save the new files in the \Backup\Windows directory.

57 4 4.5.7 Wireless Communications The Wireless Communications applet provides management of the 802.11 abg radio and the Bluetooth modules. From the Control Panel, double tap the ‘Wireless Communications’ icon:

58 4 4.5.8 Stylus Calibration You might need to recalibrate the touch screen (i.e. when you attempt to select one item with the stylus, another item is erroneously selected). To recalibrate the touch screen, complete the following steps: 1. From the Control Panel main window, double tap Stylus to open the “Stylus Properties” window: 2. Adjust Double-Tap sensitivity if needed or desired:

59 4 3. Tap ‘Calibration’ to open the Calibration screen. Tap ‘Recalibrate’: 4. Carefully press and briefly hold stylus on the center of the target. Repeat as the target moves around the screen. Press the Esc key to cancel the stylus calibration:

60 4 5. Press the Enter key or tap the screen to accept the new calibration settings. Press the Esc key to keep the old settings. New calibration settings are persistently saved in the Registry. Startup Stylus Calibration When starting the terminal, a stylus calibration screen comes up if valid calibration settings are not available. This happens in the following circumstances: 1. At the first startup of the terminal. 2. After restoring registry default settings using the applet Registry Admin and performing a warm boot. 3. After a Clean Boot. 4. After a Firmware Update (see section 4.8.3)

61 4 4.5.9 Audio Settings There are two applets that control volume: Audio and Volume & Sounds. Audio From the control panel main window, double tap the ‘Audio’ icon: The Audio applet allows to set the recording volumes of the main microphone and of the headset microphone. Also, it allows to set the headset volume when the user is listening to an audio file. Audio Window

62 4 Volume & Sounds From the control panel main window, double tap the Volume & Sounds icon: The Volume & Sounds applet configures audio features of the rear speaker and appears as follows: Volume & Sounds Window

63 4 4.6 CONNECTING TO OTHER COMPUTERS There is more than one way to connect the Datalogic Memor to a host PC running Windows. Each requires specific connections in order to function properly. 4.6.1 Windows Mobile® Device Center The desktop application Windows Mobile® Device Center gives you the ability to synchronize information between a desktop computer and your Datalogic Memor. Synchronization compares the data on the Datalogic Memor with that on the desktop computer and updates both with the most recent information. Windows Mobile Device Center is only compatible with Windows Vista and Windows 7; if you run Windows XP or earlier, you have to download Microsoft ActiveSync. You can establish a connection to your Datalogic Memor through the following interfaces: − USB either directly or through the Single Dock − RS232 either directly or through the Single Dock − Bluetooth® (see par. 4.6.2) To establish a partnership between the Datalogic Memor and a host PC, start Windows Mobile® Device Center and follow the steps below: 1. Connect the Datalogic Memor to the host PC. Windows Mobile® Device Center configures itself and then opens. 2. On the license agreement screen, click Accept. 3. On the Windows Mobile Device Center’s Home screen, click Set up your device. 4. Select the information types that you want to synchronize, then click Next. 5. Enter a device name and click Set Up. When you finish the setup wizard, Windows Mobile Device Center synchronizes the mobile computer automatically. The Datalogic Memor running Windows CE does not come equipped with Microsoft Office Outlook or any other application that allows users to view contact, calendar, e-mail, or task data. Users can view files copied to the Datalogic Memor by WMDC's file synchronization feature. NOTE

64 4 4.6.2 Bluetooth® Manager Device Setup Using the Datalogic Memor to connect to another device To create a Bluetooth® pairing between your device and another device that has Bluetooth® capabilities, ensure that the two devices are turned on, discoverable, and within close range. 1. From the control panel, double tap the ‘Bluetooth Manager” icon: 2. From the Bluetooth Manager control panel tap ‘Connections’.

65 4 3. Search for available Bluetooth® devices by tapping the button for the type of device you want (Printer, Serial or All) or tap Discovery > Discover to skip this step. The Datalogic Memor will search for Bluetooth® devices within range. If you attempt to set up a connection when the Bluetooth® radio is disabled, you will receive a message reminding you that the radio is turned off, and asking if you want to turn it on. Tap Yes if you need to enable the Bluetooth® radio. NOTE 4. Once searching is complete, Bluetooth® device Profiles will be displayed in the Discovery tab. You can set up a connection to a device in the list by selecting the device and then tapping the 'Connect' button:

66 4 To create a pairing: 1. Select a service: 2. Configure any encryption, authentication, or virtual port options required by the service selected.

67 4 Icon Service Dialup Networking Printer Object Push (OPP) Object Exchange (OBEX) ActiveSync Human Interface Device (HID) - Keyboard Serial Personal Area Network (PAN) Modem Headset Handsfree Virtual Port allows you to specify the incoming port, which is used to communicate serially with an incoming device just as if it were a physical COM port. This option is available only if you have selected a Printer or Serial service.

68 4 You can also select Encrypt or Authenticate from the Bluetooth® control panel to apply or modify those settings. 1. To require Authentication, check the checkbox, then tap OK. 2. If required, the Authentication Request dialog will then open, requesting that you enter a PIN. Use the Input Panel or the keyboard to type the PIN. 3. Tap OK to complete. The dialog will also appear when an Authentication request is received from another device.

69 4 Once you have set up a pairing, you can view the settings by double-tapping its name from the Connections tab. Tap the arrow to change the Virtual Port, or Delete to remove the device pairing. Tap Sync to initiate a Sync (available only if the service is an ActiveSync connection).

70 4 Using your device to connect to the Datalogic Memor Before turning on Bluetooth®, ensure that the two devices are within close range and that both Bluetooth-enabled devices are discoverable. 1. From the control panel main window, double tap the Bluetooth Manager icon to open the Bluetooth Manager control panel. 2. Tap Settings. The Settings tab allows you to enable or disable the Bluetooth® radio and specify settings for Incoming Connections.

71 4 3. Select or clear the “Enable Bluetooth Radio” check box. If you’re going to be attaching a serial device (i.e. a scanner) to the Datalogic Memor, use the Port control to select a virtual COM port to use for the connection. 5. Tap ‘Find Me’ if you want to make the Datalogic Memor discoverable to other Bluetooth® devices for 60 seconds, allowing them to set up a connection. By default, Bluetooth® is turned off. If you turn it on, and then turn off your device, Bluetooth® also turns off. When you turn on your device again, Bluetooth® turns on automatically. NOTE

72 4 4.6.3 FTP Server Setup The Datalogic Memor Windows CE Operating System includes a sample File Transfer Protocol (FTP) server. FTP is used for copying files to and from remote computer systems over a network using TCP/IP. You can establish a connection to your Datalogic Memor using its FTP Server through the following interfaces: WLAN using the 802.11 abg radio Proceed as follows: 1. Create a registry file (extension .reg) to setup and enable FTP Server communication. A simple example file for anonymous logon is given below: REGEDIT4 [HKEY_LOCAL_MACHINE\Comm\FTPD] "DefaultDir"="\\" "AllowAnonymousUpload"=dword:00000001 "UseAuthentication"=dword:00000000 "BaseDir"="\\" "IsEnabled"=dword:00000001 "LogSize"=dword:00001000 "DebugOutputMask"=dword:00000017 "DebugOutputChannels"=dword:00000002 "IdleTimeout"=dword:0000012c "AllowAnonymous"=dword:00000001 "AllowAnonymousVroots"=dword:00000001 2. Copy this file to the Datalogic Memor using ActiveSync®. 3. Launch the .reg file from the Datalogic Memor. 4. Perform a warm boot on the Datalogic Memor. 5. From the PC > Explorer address bar (or running an FTP Client from the PC), enter the Datalogic Memor IP address. For more information on FTP Client/Server connections refer to the following web page: http://msdn2.microsoft.com/en- us/library/aa922316.aspx. NOTE

73 4 4.7 BACKUP DIRECTORY FILE MANAGEMENT All of the Windows CE 5.0 system files reside in RAM (volatile memory) except for the Backup directory, which resides in FLASH (non-volatile memory). Therefore the contents of the Backup directory are persistent even if the mobile computer is re- booted or the battery pack is changed. You can save your more important files that you don't want to lose due to mobile computer re-boot, in the Backup directory or create a sub-directory within Backup. Even though the Windows Directory resides in RAM, it often contains files or sub- directories created by the user or by installation programs that you don't want to lose at re-boot. To keep these files persistent it is necessary to copy them to the directory \Backup\Windows. This directory doesn't exist originally (only Backup exists), and therefore it must be created. At the next cold boot, before activating the shell, Windows CE 5.0 will copy the contents including all sub-directories of \Backup\Windows to \Windows. Likewise, to maintain files that must be run at Windows CE 5.0 startup, (i.e. .exe, .lnk, .vb, .htm, etc.), it is necessary to copy them to the directory \Backup\Startup. This directory does not exist originally (only Backup exists), and therefore it must be created. The application programs will be run after any type of re-boot (both software and cold boot). As an alternative to the Safe Setup function, it is possible to copy the .cab files to the directory \Backup\Cabfiles (the Cabfiles sub-directory doesn't exists originally and must therefore be created) and perform a mobile computer cold boot to have the application installed. Once these files are copied to the directory \Backup\Cabfiles, the application will be run after each re-boot. From the second cold boot on, a message may be displayed such as " is already installed. Re-install?". This message blocks the boot process. Press the [Enter] key to continue the system initialization. Even if the entire Windows Mobile file system reside in FLASH (non-volatile memory), the mechanism described above is supported also on Windows Mobile for backward compatibility.

74 4 4.8 DATALOGIC FIRMWARE UTILITY The Datalogic devices are equipped with a field upgradeable firmware mechanism. Firmware updates are available on the Datalogic website: http://www.datalogic.com/eng/support-services/automatic-data- capture/downloads/software-utilities-sw-2.html. After you have downloaded the desired update, there are several ways you can update the firmware on your device. − Use Wavelink Avalanche™ if you have multiple Datalogic devices to update. For more information refer to the dedicated section of the Wavelink website: http://www.wavelink.com/Datalogic-device-downloads. − If Wavelink Avalanche™ is not available or you have only a few Datalogic devices to update, use the Datalogic Firmware Utility (DFU), described below, to install or update the firmware using an ActiveSync connection. The following sections provide procedures for the retrieval and installation of the most current firmware image onto a Datalogic device. 4.8.1 Retrieving a Firmware Image Update The following instructions use Internet Explorer to retrieve the most current firmware image. 1. Launch Internet Explorer on your PC and navigate to the Datalogic website. 2. Navigate to the Downloads section of the website. 3. Using the device selection fields, select the file you want to download, then click Save to begin copying the files to your local machine (or local network location).

75 4 4.8.2 Installing DFU on the Host PC Datalogic Firmware Utility (DFU) provides administrators with a field upgrade mechanism. You must have Microsoft® ActiveSync (for Windows XP devices) or Windows Mobile® Device Center (for Windows 7 and Vista devices) already loaded and running on the host PC to use DFU. Refer to par. 4.7.1 for more information about Windows Mobile® Device Center. Prior to installing, you must remove any previous versions of DFU installed on the host PC. NOTE To install the Datalogic Firmware Utility, complete the following steps on the PC: 1. Go to the Datalogic website and download the most current version of the Datalogic Firmware Utility. Unzip the file, then double-click to run DFU_Setup. exe. 2. Click OK to continue once you have removed previous versions of DFU. 3. The Welcome to DFU Setup Program screen opens. − Please exit all Windows applications before running this installer. − Click Next to continue the Setup. 4. Follow the onscreen instructions to complete the installation.

76 4 4.8.3 Updating the Firmware After copying the firmware image to the host PC (see par. 4.10.1) and installing DFU (see par. 4.8.2), you can upgrade the firmware on your Datalogic device. The following steps require that you have already established an ActiveSync or Windows Mobile Device Center connection between the host computer and the Datalogic device. NOTE 1. Go to Start > Programs > Datalogic > DFU > Datalogic Firmware Utility. 2. Verify that ActiveSync is selected by clicking Communications > WMDC/ ActiveSync. 3. Click browse (...) and navigate to the location where you saved the firmware file for your terminal. 4. Select the current *.out file and click Open. 5. Click Update. 6. DFU will compare the selected firmware image with the firmware already loaded on the device; if the image is compatible with the connected device, DFU will proceed to update the firmware image on your device. After the firmware of your device has been updated, DFU will automatically perform a warm reset of the device.

78 4 4.9 DATALOGIC CONFIGURATION UTILITY Datalogic Configuration Utility (DCU) is a Datalogic Windows-based utility tool allowing the uploading, modifying and downloading of the configuration of a Datalogic device. Configuration settings include Scanner, Control Panel, and Datalogic Desktop Utility (DDU). The DCU installer is downloadable from the Datalogic website (http://www.datalogic.com/eng/support-services/automatic-data- capture/downloads/software-utilities-sw-2.html). DCU functions in both direct (with an ActiveSync connection) and indirect (with Wavelink Avalanche™) modes. In direct mode, connect a device through ActiveSync and then click on the Get from Device icon to receive the device’s current configuration. Once loaded, the Configuration Tree (on the left side of the window) is used to navigate the device’s configuration. The right side of the window is a work area where the values of different parameters may be set for each branch of the configuration tree. Click on the parameter group branch to open it and inspect the parameters you wish to modify. After altering the device’s configuration, the new configuration can be sent to the terminal by clicking on the Send to Device icon. Reference the Wavelink Avalanche™ documentation on the Wavelink website (www.wavelink.com/Datalogic-device-downloads) for a description of indirect mode for DCU, which will allow you to update the configuration of multiple devices simultaneously over Wi-Fi.

79 4 4.10 DATALOGIC DESKTOP UTILITY Datalogic Desktop Utility (DDU) allows administrators to configure Windows® CE and Embedded Handheld devices to control individual user access. This includes the ability to: • Prevent users from changing your device OS settings. • Define keys to access specific functionality/programs. • Use Application Selector to replace desktop with a selection of authorized applications • Internet Explorer access restriction, configuration and customized recovery mechanisms. To open DDU for the first time, tap Start > Settings > Control Panel > or Start > Programs > Device tools > and then double tap the icon for “Datalogic Desktop Utility”.

80 4 These options are available from all screens: COMMAND DESCRIPTION OK Tap OK to apply the settings and modifications you have made in the DDU tabs. OK saves every modifications. X Tap X to cancel the settings and modifications you have made in the DDU tabs. X cancels all modifications you have made in DDU.

81 4 4.10.1 Administrative Options (Admin tab) When you open the DDU control panel, the “Admin” tab appears. COMMAND DESCRIPTION Enable Datalogic Desktop Select/tap this checkbox to activate the DDU functions such as Windows Access Restrictions and Application Selector. Enter Password Enter a password in the text box. This allows the user to specify a password when this utility is launched. By default the password is “1234”. A password can consist of all standard keyboard characters. Re-Enter Password Carefully re-enter the password in the second text box. Set Password Select/tap “Set Password” to enable the password. To change or remove the password, enter a new value, re-enter the new value, and select/tap “Set Password”. Set Defaults Select/tap “Set Defaults” to reset the default values of all the functions on all the tabs. After you select this option, you will receive a prompt to verify this selection.

82 4 Setting a Password To set a password: 1. Enter a password in the field. This allows the user to specify a password when this utility is launched. By default the password is “1234”. Be sure to record the Password for future reference. NOTE 2. Re-enter the password in the second field. 3. Select/tap “Set Password” to enable the password. 4. Select/tap “OK” to close the “Set Password Confirmation” dialog. You must select/tap “Set Password” prior to exiting DDU in order to store and activate your new password. It is not necessary to select “Enable Datalogic Desktop”. NOTE If you select/tap “Set Defaults” it will remove all custom settings and restore all the factory default settings, except a previously set password. CAUTION Changing a Password To change to a new password: 1. Enter a new value in the “Enter Password field”. 2. Re-enter the new value in the “Re-enter Password” field. 3. Select/tap “Set Password”.

83 4 Removing a Password To remove a password: 1. Enter blanks in both “Password” fields. 2. Select/tap “Set Password”. Password Request Dialog Box Once the password is set, the next time you open the “Datalogic Desktop Utility”, the DDU Password dialog box opens. This dialog box will only open if a password was defined. 1. Type in your password using either the keypad on the unit, or using the stylus on the soft input panel (SIP). If you enter an incorrect password, the system will prompt you to input the correct one. 2. Select/tap “OK” to verify the password. Or tap “X” to cancel.

84 4 4.10.2 Setting Hot Keys You can use Hot Keys (HKeys) Tab to associate specific keys, such as -, with specific applications. You can also create a new Hot Key combinations. Select the HKeys tab to access these options. For example, you could set to launch a sample application like: \Windows\pword.exe. COMMAND DESCRIPTION Hot Key This pull-down list displays the available function keys to define. Select the desired one from the list. New Select/tap to specify a new Hot Key, not on the Hot Key list. This opens a new dialog, shown in Figure 4. Delete Tap to delete the selected Hot Key. You can only delete the Hot Keys you have added. You cannot delete -. Associated Function This pull-down list displays the available functions. Select either Application or Action. Application Displays path to the selected application.

85 4 Browse Select/tap to browse for application files. You can associate an executable program with the specified Hot Key. Arguments Type the command-line arguments that are needed for the specified application. This option is only available when Application is selected in the Associated Function pull-down list. Action Specify an action to associate with a Hot Key. This list includes: SIP, toggle Taskbar, Datalogic Config Admin, and Application Switcher. This option is only available when Action is selected in the Associated Function pull- down list. The is the key initially assigned to DDU Admin. If you wish to assign this key to a different function, you must first select an unassigned Hot Key and assign it to the Action - DDU Admin. You can then go back and reassign the FKey to something else. Datalogic device 19-key models Numeric F1-F10 Alpha keys Side/top triggers Hot Keys Available

86 4 Adding a new Hot Key When you select ‘New’ on the HKeys tab, this opens the Add New Hotkey dialog box. To define a new Hot Key, complete the following steps: 1. Enter the key combination to define a new Hot Key in the Enter Key textbox. 2. The Note displays important information indicating Hot Keys that should not be used. 3. Select/tap OK to save the New Hot Key. If you select/tap X, the key will not be saved. COMMAND DESCRIPTION Enter Key Enter the desired key combination in this text box to define a Hot Key. OK Select/tap OK to add the specified Hot Key. X Select/tap X to cancel the specified Hot Key. Make sure you do not attempt to add a Hot Key that is already defined. NOTE

87 4 It is possible for the keyboard wedge to activate assigned Hot Keys using alphanumeric characters. Barcodes containing characters associated with assigned Hot Keys will trigger the action or application assigned to that Hot Key. CAUTION

88 4 4.10.3 Internet Explorer Configuration Tap the IE (Internet Explorer) tab to access the IE Configuration option. Use the IE Error Redirection option to provide customized recovery from common IE errors. When an error occurs, the browser can redirect access to a specified error page with instructions on how to recover from the problem. COMMAND DESCRIPTION Error Type The Error Types pull-down list displays available IE Error Types: (400) Invalid Syntax, (403) Request Forbidden, (404) Object Not Found, (406) No Response Format, (410) Page Doesn't Exist, (500) Internal Server Error, (501) Server Can't Do That, Generic Error, Server Is Busy, Couldn't Find Server, URL Syntax Error, Request Cancelled, Not Available Offline. Error Page Edit this textbox to associate a website or html file with the specified error. Assign as Default Select/tap to set a specified error page as the default. A confirmation dialog opens to ask if the default error page applies to all errors. Browse Select/tap to browse for files. Enable Address Bar Select/tap this check box to show the IE address bar. IE Address Bar IE Menu Bar IE Tool IE Status Bar

89 4 COMMAND DESCRIPTION Enable Tool Bar Select/tap this check box to show the IE toolbar. Enable Status Bar Select/tap this check box to show the IE status bar. Enable Menu Bar Select/tap this check box to show the IE menu bar. Internet Options Tap Internet Options on the IE tab to open the Windows CE Internet Options control panel. Customize these settings as necessary. The Internet Options control panel applet is part of the Microsoft® Windows® CE operating system. For more information on the Windows CE operating system, please refer to the Microsoft website at http://www.microsoft.com/. NOTE The DDU allows you to cancel prior to applying your changes. However, any settings modified in the Internet Options control panel applet through the DDU interface will be applied even if you later cancel the your modifications in the DDU. CAUTION

90 4 4.10.4 Modifying Windows Controls Select/tap the “Win” (Windows Controls) tab to access the Windows Controls option. Use Windows controls to allow or restrict access to Windows system functions. You can disable normal Windows functions such as the taskbar, leaving nothing but a blank workspace. This allows applications to be run in full screen mode and prevents users from accidental or unauthorized use of the taskbar, Internet Explorer, and any other resident applications. COMMAND DESCRIPTION Show Taskbar Select/tap Show Taskbar to specify that the taskbar is shown or hidden. Taskbar Enabled Select/tap Taskbar Enabled to specify whether the taskbar is accessible. This option is only available when the Show Taskbar is checked. Start Menu Enabled Select/tap Start Menu Enabled to specify whether the Start menu is accessible or not. This option is only available when both Show Taskbar and Task Bar Enabled are checked. Windows CE Desktop Enabled Select/tap Windows CE Desktop Enabled to specify that the desktop icons are accessible or not. WinCE Desk Start Menu Taskbar

91 4 4.10.5 AppSelector Options (AppSelect tab) Tap the Application Selector (“AppSelect” Tab) to edit, add, or delete applications for the application selector. Application Selector Options Enable Application Selector Select/tap “Enable Application Selector” to enable/disable the application selector. When enabled, the Application Selector replaces the desktop and allows only authorized use of applications. Show status icons Enable or disable the status icons view (see par. 4.10.3). The status icons can be configured on the Status tab of DDU. Authorized Applications This is a list of applications that the user can access. Application Selector Commands New Select/tap “New” to create a new application entry. Edit Select/tap “Edit” to edit the selected entry. Del Select/tap “Del” to delete the selected entry. Up/Down Select/tap “Up/Down” to move an entry up or down in the ListView.

92 4 Add Applications The “Add Application” dialog opens when you tap either “New” or “Edit”. From the “Add Application” dialog the administrator can configure and/or add/change a new application entry in the list. Applications with the “Run Application at Startup” option enabled will start automatically when the Application Selector starts up. COMMAND DESCRIPTION Application Title Type the name of the application in this textbox in the way you wish it to appear for the user. Executable Displays the path for the executable file which you want to run. Browse Select/tap to browse for the desired executable file. The results of this search are placed in the “Executable” textbox. Arguments Type any command line arguments to be used when an application is executed. Icon File Displays the path/link to the desired icon file. Browse Select/tap to browse for the desired icon file. The results of this search are placed in the “Icon File” textbox.