Electronics Line infiniti Operation & User’s Manual

home that are controlled by the optional Home Automation feature. Home Automation An optional feature that enables the user to control electrical appliances and lights via the control panel. K Keyfob Handheld wireless transmitters used to remotely control the system. L Limited Code A user code that automatically expires 24 hours after it is programmed. Log See Event Log M Master Code The only user code with the ability to program other user codes. The Master code also has exclusive access to specific system functi ...

Arming can be defined as activating the system. When the system is armed, it monitors the zones that are protected by the sensors. If a sensor detects an intrusion, the system generates an alarm. Certain sensors, such as smoke sensors, are always active regardless of system status. 3.1: Arming the System Three arming modes are available: Full, Part and Perimeter. These modes enable you to arm your system using different methods. Full Arming Full arming activates the entire system. This arming method is used when you intend to leave your home, leaving the ...

Chapter One: Introduction and Overview ............................................................................................3 1.1: Security System Components................................................................................................3 1.2: System Monitoring .................................................................................................................4 1.3: Home Automation ..................................................................................................................4 1.4: Cellular Monitoring and Control..... ...

The Follow Me feature is designed to send an SMS message to your mobile phone notifying you that certain events have occurred within your security system. , This feature requires that you have cellular communication support. You may only access the Follow Me feature if this feature is enabled in programming. To edit the Follow Me number: 1. From the main menu, select Follow Me [5]. 2. Enter a telephone number for Follow Me communication. This number must be for a cellular phone with the capability to receive SMS messages. 6.5: Event Log The event log records events that hav ...

controlled by HA unit 08. SMS Command Descriptor User Code On Unit B o i l e r O n # 1 2 3 4 1 0 8 , Do not include the symbol ‘#’ in the descriptor as the system regards any text after this symbol as part of the command. The SMS Command Descriptor is optional but you must still enter the ‘#’ before the user code. SMS Confirmation Message Format After an SMS command is executed by the system, a message is returned to the your mobile phone. This message includes the HA unit’s descriptor and the c ...

home that are controlled by the optional Home Automation feature. Home Automation An optional feature that enables the user to control electrical appliances and lights via the control panel. K Keyfob Handheld wireless transmitters used to remotely control the system. L Limited Code A user code that automatically expires 24 hours after it is programmed. Log See Event Log M Master Code The only user code with the ability to program other user codes. The Master code also has exclusive access to specific system functi ...

The Service menu includes various functions that enable you to test your system effectively. You can gain access to the Service menu using the Master code. Set Time & Date To set the time: 1. From the Service menu, select Set Time/Date, Set Time [711]. 2. Enter the current time in 24hr format. 3. Press ; the time is modified. To set the date: 1. From the Service menu, select Set Time/Date, Set Date [712]. 2. Enter the current date in DD/MM/YY format. 3. Press ; the date is modified Siren Tests To test the external siren: • From the Service menu, select Ext. Siren Tes ...