Premium TV-4593LED Operation Manual

soft, clean cloth or some special liquid cleaner. Do not apply excessive force to the screen when cleaning. Do not use water or other chemical cleaner to clean the screen as this may damage the surface of the LCD screen. Product Read all of the instructions before operating the set. Keep these instructions well for future use. Do not block or cover the ventilation openings on the back cover. Do not push objects of any kind into this unit through the cabinet slots as they could touch the current carrying parts or short-circuit parts, resulting in fire, electric shock, or damage to the unit. Do not attempt to open the cabinet as this may cause damage. There are no parts inside you can service by yourself. Refer all servicing to qualified personnel. Do not touch the screen surface with fingers as this may scratch or mar the LCD screen. Do not impact the LCD screen with hard pressure as this may damage the LCD screen severely. Unplug the set under the following conditions: - If the set will not be used for a long period of time. - If the power cord or the power outlet/plug is damaged. - Follow the instructions to install and adjust the product. Adjust those controls that are covered in this operating instructions as improper adjustment of other controls may result in damage. If this happens, unplug the set and refer to the service personnel. - If the set is subject to impact or has been dropped to Have the cabinet damaged. Where an all-pole mains switch is used as the disconnect device, the switch shall remain readily operable. Power and Plug Do not allow anything to rest on or roll over the power cord and the signal cable. Protect the power cord and the signal cable from being trampled. Do not overload the power cord or the power outlet. Do not expose the power cord and the signal cable to moisture. Power Cord and Signal Cable Do not place the set on an unstable cart, stand, or table. Place the set on a place that allows good ventilation. Do not use the set near damp, and cold areas. Protect the set from overheating. Keep the set away from direct sunlight. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. Do not use the set near dust place. Use Environment Hanging the TV Set on the Wall Warning: Warning:The batteries shall not be exposed to excessive heat such as sunshine, fire or the like. This operation requires two people. To ensure a safe installation, observe the following safety notes: Check that the wall can support the weight of the TV set and wall mount assembly. Follow the mounting instructions provided with the wall mount. The TV set must be installed on a vertical wall. only screws suitable for the material of TV set cables are placed so that there is not danger of tripping over them. instructions about our TV sets are also Make sure to use the wall. Make sure that the All other safety applicable here. Precautions

02 Panel Buttons Sockets HDMI INPUT HDMI VGA INPUT VGA IN ANTENNA IN ANTENNA INPUT Note: 1) the audio input of YPbPr , VGA and HDMI-DVI share the same socket with AV2. 2) VGA input corresponds to the PC option in the unit. CHANNEL UP button Scans up through the channel list. In the menu system, it points up to items and adjusts menu controls. CH. MENU button Brings up the menu system. MENU SOURCE button Brings up the signal source selection menu. SOURCE Button Turns off the unit to the standby mode or turns on the unit in the standby mode. CHANNEL DOWN button Scans down through the channel list. In the menu system, it points down to items and adjusts menu controls. CH. VOLUME UP button Increases the volume. In the menu system, it points right to items and adjusts menu controls. VOL. VOLUME DOWN button Decreases the volume. In the menu system, it points left to items and adjusts menu controls. VOL. V L R AV2 IN Y Pb Pr Component IN V L R AV IN YPbPr/YUV INPUT AV2 INPUT AV1 INPUT USB INPUT USB DC INPUT DC V L R AV OUT AV OUTPUT

Press the I on the power button to switch on the TV, I means switching on the power supply. ,, ,, Note: In case of any danger, if you do not use this unit , you should pull out the plug For some unit, it is no this button. ,, ,, When the TV is in the standby mode, press the or the program up/ down button on the remote control or unit to switch on the TV. ,, ,, BASIC OPERATION Press the 0 on the power button to switch off the TV, 0 means switching off the power supply ,, ,, ,, ,, When press the button to switch on or switch off the unit. Note: For some unit, it is no this button. Remote Control Functions Most of your television's functions are available via the menus that appear on the screen. The remote control supplied with your set can be used to navigate through the menus and to configure all the general settings. For game function, it is depending on the model. The optional buttons indicated with symbol* depend on the supplied remote control. Note: Power button Press to turn the TV on or off (standby mode). MUTE button Press to mute or restore the TV sound. button Source Brings up the signal source selection menu. SOURCE button Display Displays the current channel number and other information on the TV screen. DISPLAY Return button Returns to the previously viewed channel. RETURN ZOOM Zoom button Selects the scale. Note: In the YPbPr & HDMI mode, it is available for the SDTV. In the PC mode, it is unavailable. In the USB mode, it adjusts the size of the picture. P. Effect P. Effect button Toggles through the picture preset settings F1 F1 button Switches the sound mode in BTSC mode. F2 F2 button Enters the preview of picture in USB mode. In other modes, enters GAME mode. Menu button Brings up the menu system, or exit the menu. MENU S. Effect S. Effect button Toggles through the sound modes F4 F4 button Displays the next page picture in USB mode. F3 F3 button In the TV and AV mode, enter CCD directly. In USB mode, displays the previous page picture. EXIT Exit button Exits the Menu system. Numerical buttons Enters channel numbers. Channel up/ down buttons: Scans up or down through the current channel list. Up/down/ left/ right direction buttons Highlights different items in the menu system and adjusts the menu controls. In USB mode, press the left or right button to fast reverse or fast forward. OK OK button Confirms your selection for entering the source, the submenu etc. . Volume up/ down buttons Increases or decreases the TV's volume. POWER MUTE SLEEP Sleep button Selects the sleep timer. TV TV button In any source, switches to TV mode. USB USB button In any source, switches to USB mode. OPTION OPTION button it is unavailable. * * *

Press MENU button to access the menu or return to the previous menu or close the menu step by step. Press EXIT button to quit the menu. Press button to move the cursor to select option. Press or OK button to enter the select option Press button to adjust value or set option. Press numeric button to enter the program NO.. / / / / Picture The Picture menu is used to adjust the picture settings. You can easy adjusting these settings to define your own preferred picture. adjusting the brightness of the picture . adjusting the difference between the light and dark areas of the picture. COLOR: adjusting the picture color. adjusting the crispness of the edges in the picture. TINT: adjusting the color. Note: only in the NTSC mode, it is available. the left or right button to scroll through the color settings: COOL for a more blue palette of picture colors; NORMAL ; and WARM for a more red palette of picture colors BRIGHTNESS: CONTRAST: SHARPNESS: COLOR TONE: adjusting the color tone of the picture. Use direction . FLESH TONE: correcting the color of the picture. Sound The Sound menu is used to adjust the sound. VOLUME: increasing or reducing the volume. BALANCE: using the left or right direction button to balance the sound between the left and right speaker to best suit your listening position. EQUALIZER: using this function to get the better quality of volume. AVC: For some channel, the volume is low or high, by the function, the volume may be amended. MODE: scrolling through the available audio types, which control the way the sound comes through your speakers. The personal setting is saved according to changes you make to BASS and/or TREBLE setting. SURROUND: using this function to switch the unit to the best surround sound mode, select On or Off. Setup The Setup menu is used to adjust the set. a start-up sound when the TV is turned on. CHILD LOCK: the child lock function is used to lock the buttons on the front panel of the TV. When the Child lock is set to On , all the buttons on the local front panel are locked. But you can still use the Power button on the front panel to turn on/off the TV. Reset: selecting On, renew the unit to the factory setup. LANGUAGE: selecting the OSD language. COLOR SYSTEM: selecting an appropriate color system using the left or right direction button. BLUE BACK: selecting On, the color of background is blue when it is no signal. MELODY: selecting BASIC OPERATION App Channel Sound Setup Picture 50 Color Tone Flesh Tone Brightness Contrast Color Sharpness Tint Select Adjust Back Menu 50 Volume Balance Channel App Sound Setup Picture AVC Surround Equalizer Mode Select Adjust Back Menu Child Lock Language Color System App Channel Setup Sound Picture Melody Blue Back English Reset Select Adjust Back Menu .

Tuner Mode: using this function to select the signal source between cable and air. CH. Setting allows you to lock a channel or skip a channel Auto Store: enter the Installation menu and select Auto store, then press OK or the right button to start the auto searching. NOTE: While searching is going on, press the MENU button can quit the searching. : CCD: Select the Cur. Channel. Press the left or right button or use the numerical buttons to select the channel that you want to lock or skip. Select the channel Lock. Press the left or right button to select On or Off. When select to On, the selected channel will be locked and if you want to watch, you have to enter the password 0000. Select the Skip. Press the left or right button to select On or Off. When set to On, the selected channel will be skipped if you use the channel up or down button. But you can still access the channel by using the numerical button. Closed captioning (CC) lets you read the voice content of TV programs on the TV screen. Designed to help the hearing impaired, on-screen text boxes will show dialog, conversation, and activity during TV programming. Enter the CC MODE menu, Press left or right direction button to cyclically select CC 1, CC 2, CC 3, CC 4, TXT 1,TXT 2, TXT 3, TXT 4 or CC mute and off. Preset Channel BASIC OPERATION Preset Channel Parent Lock: Parental lock is a feature that lets the TV receive and process data sent by broadcasters or other program providers with program content advisory. When programmed by the viewer, a TV with Parental lock can respond to the content advisory and block program content that may be found objectionable (such as offensive language, violence, sexual situations, etc.). This feature is useful for adults to prevent certain types of programs from being viewed by children. NOTE: Access the menu, need enter the password 0000. Rating G: General Audience - All ages admitted. Suitable for all ages. PG: Parental Guidance Suggested - Contains material unsuitable for younger children. PG-13: Parents Strongly Cautioned - Contains material unsuitable for children under the age of 13. R: Restricted - Suitable for adults above 17 years of age only. NC-17: - No one under the age of 17 will be admitted. X: Adults Only - Contains one or more of the following: very graphic violence, very graphic and explicit or indecent sexual acts, very coarse and intensely suggestive language. Rating TV-Y: Designed for a very young audience, including children ages 2-6 TV-Y7: Contains Fantasy Violence (FV). Appropriate for children age 7 and above who have acquired the development skills needed to distinguish between make-believe and reality. TV-G: Suitable for most audiences. Contains little or no violence, no strong l language, and little or no the sexual dialogue or situations. TV-PG: Contains material unsuitable for younger children. Could contain moderate violence (V), some sexual situations (S), infrequent coarse language (L), or some suggestive dialogue (D). TV-14: Contains some material unsuitable for children under 14 years of age. Contains one or more of the following: intense violence (V), intense sexual situations (S), strong coarse language (L), or intensely suggestive dialogue (D). TV-MA: Viewed by adults and therefore may be unsuitable for children under 17. Contains one or more of the following: graphic violence (V), explicit sexual situations (S), or crude indecent language(L). The Function is activated only when the contents of the receiving programs, such as violence and sexual scenes, are encrypted. Locking automatically locks all the higher ratings. Press OK button to enter the following menu. Block MPAA Block TV Tuner Mode Auto Store Parent Lock App Channel Setup Sound Picture CH. Setting CCD Cable Select Adjust Back Menu Parent Lock Tuner Mode CCD App Channel Setup Sound Picture Auto Store CH. Setting Block MPAA Rating Block TVRating Canadian English Rating Block MPAA Unrated Canadian French Rating No No Select Adjust Back Menu Block TV None Rating

CE_E CE_ CE_ CE_ CE_ CE_ CE_ This program is not suitable for any children and baby. C (Children): Programming intended for children under age 8. C8 (Children 8 and Older): Programming generally considered acceptable for children 8 years and over to watch on their own. G (General Audience): Programming considered acceptable for all ages groups. PG (Parental Guidance): Programming intended for a general audience but which may not be suitable for younger children (under the age of 8). 14 (Viewers 14 and over): Programming contains themes or content which may not be suitable for viewers under the age of 14. 18 (Adults): Programming intended for adults 18 and older. Canadian French Rating CF_E This program is not suitable for any children and baby. CF_G (General Audience) This program is suitable for audiences of all ages. CF_8 ANS (Viewers 8 and over) Not recommended for young children. CF_13 ANS (Viewers 13 and over) Programming may not be suitable for children under the age of 13. CF_16 ANS (Viewers 16 and over) Programming is not suitable for those under age 16. CF_18 ANS (Adults) Programming is for adults only. Block MPAA Unrated: select Yes or No to lock or open the unrating movie. Block TV None Rating: select Yes or No to lock or open the unrating TV. Note: CCD and Parent lock are available in the TV and AV mode. BASIC OPERATION f. APP Function DNR: using this function for getting the better picture in some sources. BACK LIGHT: adjusting the back light by selecting normal, sunshine and energy saving. ALC: using this function for getting the better picture. CHANGE PASSWORD: Enter the password0000 to enter the submenu, then press the new password that you want twice. USB SETUP: this unit is fitted with a USB connector that enables you to view photos(only support JPG&BMP), listen to music(only support MP3) or read book(only support TXT) stored on a USB storage device. After connect the USB device to the USB port on the side of the TV, you can use the function. Press the source button to display the source main menu ,then press the up or down button to select the USB, press the OK or right button to enter the USB submenu, press the OK or right button to confirm your selection. Note: 1)Press the left button to exit the last menu. 2)When enter the USB menu, press the EXIT button, you can press the left or right button to select folder, music, picture or text. Press OK button to confirm your selection, at this time ,only selected kind files can be displayed on the screen. you can press the up or down direction button to select it and press the Ok or right button to play it. To adjust the picture and sound feature to select Pic. Repeat, Pic. Interval, Photo Mode or Sound Repeat. Pic. Repeat : Press left or right button to select the Pic. Repeat. Pic. Interval : Press left or right button to select the time of Pic. Interval . Photo Mode: Press left or right button to select the Photo Mode. Sound Repeat : Press left or right button to select the Sound Repeat. The APP menu is used to adjust the set. HDMI USB USB 01 Source TV AV 1 AV 2 YPbPr PC Device List DNR Backlight SW Upgrade Sound ALC App Channel Setup Picture Chg Password Time Normal USB Setup Select Adjust Back Menu

only. Design and specifications are subject to change without notice. If there is any difference between the descriptions in our manual and the actual operation, refer to the actual operation as a standard. Most problems you encounter with your TV can be corrected by consulting the following troubleshooting list. No picture, no sound 1. Check if the fuse or circuit breaker is working. 2. Plug another electrical device into the outlet to make sure it is working or turned on. 3. Power plug is in a bad contact with the outlet. 4. Check the signal source. No color 1. Change the color system if it is available. 2. Adjust the saturation. 3. Try another channel. Black-white program may be received. Remote control does not work 1. Change the batteries. 2. Batteries are not installed correctly. 3. Main power is not connected. No picture, normal sound 1. Adjust the brightness and contrast. 2. Broadcasting failure may happen. Normal picture, no sound 1. Press the Vol+ button to increase volume. 2. Volume is set to mute, press the mute button to restore sound. 3. Change the sound system if it is available. 4. Broadcasting failure may happen. Unorderly ripples on the picture It is usually caused by local interference, such as cars, daylight lamps and hair driers. Adjust the antenna to minimize the interference. Blank screen in VGA mode Perhaps the TV can not recognize the resolution set by the PC. Suggest to change to the best resolution or other standard resolutions of the Windows system. Snowy dots and interference If the antenna is located in the fringe area of a television signal where the signal is weak, the picture may be marred by dots. When the signal is extremely weak, it may be necessary to install a special antenna to improve the reception. 1. Adjust the position and orientation of the indoor/outdoor antenna. 2. Check the connection of antenna. 3. Fine tune the channel. 4. Try another channel. Broadcasting failure may happen. Ignition Black spots or horizontal streaks appear, or the picture flutters or drifts. This is usually caused by interference from car ignition system, neon lamps, electric drills, or other electrical appliance. Ghost Ghosts are caused by the television signal following two paths. One is the direct path, the other is reflected from tall buildings, hills, or other objects. Changing the direction or position of the antenna may improve the reception. Radio frequency interference This interference produces moving ripples or diagonal streaks, and in some case, loss of contrast in the picture. Find out and remove the radio interference source. Troubleshooting Base Installation 1) Insert the support into the unit.(as fig1) 2) Fix the base by three screws.(as fig2) Fig1 Fig2 Note: Align withe the center of the three holes.