Prestige APS622E Installation Manual
Text of the manual
1 of 16
Page 1
Model APS622E
Installation Manual
PATENTED: www.voxxintl.com/company/patents
Table Of Contents:
Before You Begin
Page 2
Wire Harness Quick View
Page 3
Installation Of The Major Components
Page 4
6 Pin Power Harness
Page 5
Door Lock / Unlock Harness
Page 6 & 7
12 Pin Input/Output Harness
Page 7 - 9
4 Pin Main Harness
Page 9
Tachomete
2 of 16
Page 2
Before You Begin
PROFESSIONAL INSTALLATION IS
STRONGLY RECOMMENDED
Roll down window to avoid locking the keys in the vehicle
during installation.
Avoid mounting components or routing wires near hot surfaces
or near moving parts like the steering wheel as it may prevent
proper operation of the vehicle.
Tape or loom wires under the hood
3 of 16
Page 3
PATENTED: www.voxxintl.com/company/patents
6 Pin Power Harness:
1124317
1 Blue
Ignition 1 (+)
2 Red/White
Battery 1 - 12V (+)
3 Green
Ignition 2 (+)
4 Purple
Accessory (+)
5 Red
Battery 2 - 12V (+)
6 Yellow
Starter Output
12 Pin Input/Output Harness:
1124321
1 Green/Orange
Tachometer Input
2 Empty Cavity
NA
3 Black/Blue
Pulse Before
4 of 16
Page 4
This Remote Start System is designed to be used with
Automatic Transmission- Fuel Injection Vehicles Only!
INSTALLATION OF THE MAJOR COMPONENTS:
CONTROL MODULE: (P/N 1365445)
Select a mounting location inside the passenger compartment (up behind the dashboard).
The mounting location selected must be within 24” of the ignition switc
5 of 16
Page 5
WIRING THE 6 PIN MAIN POWER HARNESS Connector (P/N 1124317)
BLUE Wire: Ignition 1 Output
Connect this wire to the ignition 1 wire from the ignition switch. This wire will show +12
volts when the ignition key is turned to the “ON” or “RUN” and the “START” or CRANK”
positions, and will have 0 volts when the key is turned
