StarTech.com CB1PECP Instruction Manual

DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr.startech.com ES: Guía del usuario - es.startech.com IT: Guida per l'uso - it.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.com For the most up-to-date information, please visit: www.startech.com CB1PECP 1 Port CardBus IEEE 1284 Parallel Laptop Card

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.

Introduction .......................................................................................................................................................1 Features............................................................................................................................................................1 Before You Begin...............................................................................................................................................1 System requirements...............................................................................................................................1 Contents..........................................................................................................................................................1 Installation............................................................................................................................................................2 Windows XP/200/Vista Installation.................................................................................................2 Connecting peripheral to the adapter.........................................................................................2 Specifications......................................................................................................................................................3 Technical Support............................................................................................................................................4 Warranty Information.....................................................................................................................................4

installation, this card is IEEE 1284 standard compliant, and compatible with all 32-bit CardBus slots, providing a simple way to connect parallel peripherals to your notebook computer. Before You Begin System Requirements • A notebook computer with a Pentium Pro, Pentium III, IV , or equivalent processor with 1 available PCMCIA slot • Windows 95, 98, ME; Windows XP (32-bit, 64-bit), Windows Vista (32-bit, 64-bit) Package Contents This package should contain: • 1 x CardBus Parallel Card • 1 x Driver CD • 1 x Instruction Manual

1. Insert the card into an available CardBus slot. Since this card is hot-pluggable, this can be performed while the computer is on or off. Once the card has been inserted, ensure the computer is powered, to proceed with installation. 2. Windows will detect that the card has been inserted, and prompt for driver installation by launching the Add New Hardware Wizard. On the first window that appears, click Next. 3. In the window that follows, select Search for the best driver for my devices (Recommended) and click on Next. 4. When you are prompted to Specify the location of the driver, insert the Driver CD in the CDROM drive, and enter d:\ (where d:\ designates the location of the CDROM drive) in the text box provided. Click Next to continue. 5. Click on Next, then Finish. When prompted, restart the computer for installation to take effect. Windows 98SE/ME To install CB1PECP on a computer running Windows98SE/ME: 1. Insert the card into an available CardBus slot. Since this card is hot-pluggable, this can be performed while the computer is on or off. Once the card has been inserted, ensure the computer is powered, to proceed with installation. 2. Windows will detect that the card has been inserted, and prompt for driver installation by launching the Add New Hardware Wizard. On the first window that appears, click Next. 3. In the Window that follows, select the Specify the location... and enter d:\ in the text box provided. Click on Next to continue. 4. Click Next and then Finish respectively, on the screens that follow. When prompted, please reboot the computer for installation to take effect. 5. Upon rebooting, the newly installed port will be ready for use.