Skytech AF-4000TSS02 Operating Instructions Manual
Text of the manual
17 - REMOTE CONTROL OPERATION INSTRUCTIONS
B. REMOTE CONTROL INFORMATION
Figure 17A
Remote:
Skytech Premium Transmitter Model AF-4000TSS02 comes standard with the fireplace.
Touch Screen LCD
Takes four (4) AAA batteries (included)
A. REMOTE ICON IDENTIFICATION
IMPORTANT ELECTRICAL WARNING AND INFORMATION
Electrical wiring must be installed by a lic
C. CONTINOUS PILOT - FOR VERY COLD CONDITIONS
The IPI gas control system has the option of a continuous (standing) pilot feature. This allows you to change from a spark-to-pilot system to a stand-
ing pilot system during cold weather conditions. By having the pilot on continuously, the firebox will remain warm and a draft is established in the vent,
17 - REMOTE CONTROL OPERATION
F. INTITAL SET-UP
Plug Extension Module and AC Adaptor into receptacles.
Install (4) AA batteries into battery compartment of Backup Battery Pack , making sure batteries are installed in proper direction. Position between
valve and front of stove. A Velcro strip has been attached to help secure in place.
The Hand Held Rem
17 - REMOTE RECEIVER INFORMATION
L. MANUAL MODE
M. FAN MODE
N. LIGHTING MODE
This remote can be manually or thermostatically operated.
Press MODE/SET button for manual ON. The flame icon will appear on
the LCD screen. Press MODE/SET button again to put the control into
THERMO mode. Pressing MODE/SET again will turn fireplace OFF.
This remote will oper
O. FLAME MODE
This remote will operate the flame, allowing for (6) different flame height
levels. Press the MODE/SET button. The FLAME icon will appear on the
LCD screen. Press the FLAME icon on then screen, then ress UP or DOWN
buttons to select desired flame level. Press the MODE/SET button to set or
wait 15 seconds and the control will automatical
