Midas PRO6 Quick Reference Manual

Quick Reference Guide Midas, Klark Teknik Building, Walter Nash Road, Kidderminster. Worcestershire. DY11 7HJ. England. Tel: +44 1562 741515 Fax: +44 1562 745371 Email: [email protected] Website: www.midasconsoles.com PRO6 Control Centre - Quick Reference Guide DOC04-DL3 Issue A - September 2008 © Telex Communications (UK) Limited In lin ...

The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle i ...

The undersigned, representing the following manufacturer Manufacturer: Telex Communications (UK) Limited Address: Klark Teknik Building, Walter Nash Road, Kidderminster. Worcestershire. DY11 7HJ. hereby declares that the following product is in conformity with the regulations of the following marked EC-directives and bears ...

IMPORTANT - Please read this document carefully before using this Midas™ or Klark Teknik™ product. This is an agreement governing your use of software or other machine instructions already installed on the Midas™ or Klark Teknik™ product, as well as other software that we provide f ...

LICENSE AND/OR BASED UPON THE SOFTWARE, REGARDLESS OF THE FORM OF ACTION, SHALL NOT EXCEED THE GREATER OF THE LICENSE FEE FOR THE SOFTWARE OR THE COST OF THE PRODUCT. IN NO EVENT SHALL TELEX BE LIABLE FOR ANY LOSS OF DATA, LOST OPPORTUNITY OR PROFITS, COST OF COVER, OR SPE ...

Quick Reference Guide Precautions Before installing, setting up or operating this equipment make sure you have read and fully understand all of this section and the “IMPORTANT SAFETY INSTRUCTIONS” at the front of this guide. This equipment is supplied by a mains voltage that can cause electric shock injury! The following must be ob ...

Quick Reference Guide Installation Before installing the equipment: • Make sure the equipment is correctly connected to the protective earth conductor of the mains voltage supply of the system installation through the mains leads. • Power to the equipment must be via a fused spur(s). • Power plugs must be inserted in ...