Hydas WE-131 Instruction Manual

with massage Instruction Manual Item 4575 Please read before using! Safety precautions: - do not immerse in liquids, do not touch if the electric foot warmer has been immersed, pull plug immediately - do not use while sleeping - handicapped and the elderly should use under supervision - keep from children - pull the AC adapter from the outlet when not in use - do not use if the electric foot warmer is not operating properly, if this occurs contact our customer service staff. - do not use the electric foot warmer under a blanket - this may lead to overheating - keep electric foot warmer and cable from hot objects Cleaning: After use, unplug the wall current adapter, and wait for the electric foot warmer to cool (if warm). The polyester inner bag is suitable for hand washing and is therefore removable. After drying, put the inner bag back in before putting the electrical foot warmer back into operation. Storage: When not in use, return the electric foot warmer to its shipping carton or storeflat in a cool, dry place. Take care not to damage the surface of the electric foot warmer with sharp objects. Do not lift or move the electric foot warmer by pulling on either the power or the controller connection cables. For the sake of the environment, we request that you take packaging material to be recycled (collection points). Disposal of appliances and batteries This product may not be disposed into household waste, but has to be entered the recycling of electrical and electronic appliances. As indicated with the symbol shown on the product, on the user manual or the packaging. Please ask your local council for the nearest disposal facility. Guarantee: The guarantee lasts for 24 months from the date of purchase for manufacturers' error in material and quality. This guarantee is only valid if the instructions in the "instructions for use" have been followed. The guarantee is no longer valid if the device is damaged due to violent usage, misuse or improper use or service by unqualified persons. Address for the guarantee and service: Hydas GmbH, Am Hohlen Weg 37, 34369 Hofgeismar by 4 Model: WE-131 4575_GAgb1205 Fabrik für Medizinalbedarf GmbH & Co, Am Hohlen Weg 37, D-34369 Hofgeismar

massage.The optimal combination of pleasant warmth and massage revives and relaxes tired legs and aids circulation. This electric foot warmer has 2 motors and heats the feet. All functions can be directed with the hand-held controller. Introduction For many years, new technologies for massage have been developed. These are all designed to provide relief from everyday stresses. Please note however, - this unit is designed for the consumer´s personal use, and not with professional physical therapists in mind. Contents and Technical Data 1 electric foot warmer with massage 33 x 25,5 x 12 (29,5)cm with operating switch 1 power supply unit 230 Volt, 50 Hz, output 12V - 800mA, 9,6VA Electric foot warmer with massage Equipment 2 motors and one heating device The electric foot warmer has 2 built-in motors, which by vibrating provide a pleasant massage. The feet are massaged when the switch is turned on. At the same time you can select the intensity of the massage: low and high. The motors can be controlled separately for the left and right foot. Massage and warmth are independent on each other and can be selected separately or combined. For correct use of the operating switch, please refer to the Operating Instructions before use. Caution - Do not use the electric foot warmer with massage with a pacemaker during pregnancy if you have thrombosis if you have pains of unknown origin - Do not use the electric foot warmer with massage for longer than 15 minutes. - Long periods of massage could lead to the electric foot warmer overheating. - Interrupt the massage and wait until the electric foot warmer has cooled down. The left foot massage is turned on by pushing the switch into the position LO or HI. The massage intensity can be varied between the HI or LO setting. The right foot massage is turned on by pushing the switch into the position LO or HI. The massage intensity can be varied between the HI or LO setting. The warmth is turned on by pushing the switch to ON. Flex socket for mains part Before operating - Put the electrical foot warmer with massage on the floor. - Connect the plug of the mains part to the flex socket of the hand switch. - Secure the 230V mains part to the mains. Important Advice - Disconnect from power supply after use! - 2 3 Operating Instructions