Brother DCP-7030 Quick Setup Manual

Quick Setup Guide Setting Up the Machine Installing the Driver & Software DCP-7030 DCP-7040 DCP-7045N Before you can use the machine, you must set up the hardware and install the driver. Please read this ‘Quick Setup Guide’ for proper set up and installation instructions. Keep this ‘Quick Setup Guide’ and the supplied CD-ROM in a convenient place for quick and easy reference at all times. Version 0 EEU-ENG

2 Trademarks The Brother logo is a registered trademark of Brother Industries, Ltd. Brother is a registered trademark of Brother Industries, Ltd. Multi-Function Link is a registered trademark of Brother International Corporation. Windows Vista is either a registered trademark or a trademark of Microsoft Corporation in the United States and/or other countries. Microsoft, Windows and Windows Server and Internet Explorer are registered trademarks of Microsoft Corporation in the United States and/or other countries. Apple, Macintosh, Safari and TrueType are trademarks of Apple Inc., registered in the United States and other countries. Nuance, the Nuance logo, PaperPort and ScanSoft are trademarks or registered trademarks of Nuance Communications, Inc. or its affiliates in the United States and/or other countries. Each company whose software title is mentioned in this manual has a Software Licence Agreement specific to its proprietary programs. All other trademarks are the property of their respective owners. 3 Compilation and Publication Under the supervision of Brother Industries Ltd., this manual has been compiled and published, covering the latest product descriptions and specifications. The contents of this manual and the specifications of this product are subject to change without notice. Brother reserves the right to make changes without notice in the specifications and materials contained herein and shall not be responsible for any damages (including consequential) caused by reliance on the materials presented, including but not limited to typographical and other errors relating to the publication. This product is designed for use in a Professional Environment. ©2008 Brother Industries, Ltd. ©1998-2008 TROY Group, Inc. ©1983-2008 PACIFIC SOFTWORKS INC. This product includes the "KASAGO TCP/IP" software developed by ELMIC WESCOM,INC. ©2008 Devicescape Software, Inc. This product includes RSA BSAFE Cryptographic software from RSA Security Inc. Portions Copyright for ICC profiles 2003 by European Color Initiative, www.eci.org. ALL RIGHTS RESERVED Warning Caution Improper Setup Warnings tell you what to do to prevent possible personal injury. Cautions specify procedures you must follow or avoid to prevent possible damage to the machine or other objects. Improper Setup icons alert you to devices and operations that are not compatible with the machine. Note User's Guide, Software User's Guide or Network User's Guide Notes tell you how you should respond to a situation that may arise or give tips about how the current operation works with other features. Indicates reference to the User's Guide, Software User's Guide or Network User's Guide which is on the CD-ROM we have supplied.

1 Safety Precautions To use the machine safely ........................................................................................................................... 2 Regulations .................................................................................................................................................. 3 STEP 1 – Setting Up the Machine Installing the drum unit and toner cartridge assembly.................................................................................. 4 Loading paper in the paper tray ................................................................................................................... 5 Install the power cord................................................................................................................................... 6 Set your country (DCP-7040 and DCP-7045N) .......................................................................................... 6 Selecting your language .............................................................................................................................. 6 Setting the LCD contrast.............................................................................................................................. 6 STEP 2 – Installing the Driver & Software Windows® For USB Interface Cable Users (For Windows® 2000 Professional/XP/XP Professional x64 Edition/Windows Vista®)............................... 8 For Wired Network Interface Users (DCP-7045N only) (For Windows® 2000 Professional/XP/XP Professional x64 Edition/Windows Vista®)............................. 10 Macintosh For USB Interface Cable Users................................................................................................................. 12 For Mac OS X 10.2.4 or greater........................................................................................................... 12 For Wired Network Interface Users (DCP-7045N only) ............................................................................ 13 For Mac OS X 10.2.4 or greater........................................................................................................... 13 Consumables and Options Consumables ............................................................................................................................................. 15 Note When you move the machine, grasp the side handholds that are under the scanner. Do NOT carry the machine by holding it at the bottom. „ Illustration in this Quick Setup Guide are based on DCP-7045N.

Please keep these instructions for later reference and read them before attempting any maintenance. Warning Note Before cleaning the inside of the machine, first unplug the telephone line cord, and then the power cord from the electrical socket. DO NOT handle the plug with wet hands. Doing this might cause an electrical shock. DO NOT use any flammable substances, spray or organic solvent/liquids containing alcohol/ammonia to clean the inside or outside of the machine. Doing this may cause a fire or electrical shock. Refer to Routine maintenance for how to clean the machine in the User’s Guide. Always make sure the plug is fully inserted. After you have just used the machine, some internal parts of the machine will be extremely hot. When you open the front or back cover of the machine, DO NOT touch the shaded parts shown in the illustrations. To prevent injuries, be careful not to put your hands on the edge of the machine under the document cover or scanner cover as shown in the illustrations. To prevent injuries, DO NOT put your fingers in the area shown in the illustrations. DO NOT use a vacuum cleaner to clean up scattered toner. Doing this might cause the toner dust to ignite inside the vacuum cleaner, potentially starting a fire. Please carefully clean the toner dust with a dry, lint-free cloth and dispose of it according to local regulations. If moving your machine, use the handholds provided. First making sure to disconnect any cables. Plastic bags are used in the packaging of your machine. To avoid danger of suffocation, keep these bags away from babies and children. The fuser unit is marked with a caution label. DO NOT remove or damage the label.

IEC60825-1+A2:2001 Specification This machine is a Class 1 laser product as defined in IEC60825-1+A2:2001 specifications. The label shown below is attached in countries where required. This machine has a Class 3B Laser Diode which emits invisible laser radiation in the Scanner Unit. The Scanner Unit should not be opened under any circumstances. Internal laser radiation Wave length: 780 - 800 nm Output: 10 mW max. Laser Class: Class 3B Warning Use of controls, adjustments or performance of procedures other than those specified in this manual may result in hazardous radiation exposure. Disconnect device This product must be installed near an electrical socket that is easily accessible. In case of emergencies, you must disconnect the power cord from the electrical socket to shut off power completely. LAN connection (DCP-7045N only) Caution DO NOT connect this product to a LAN connection that is subject to over-voltages. Radio interference This product complies with EN55022 (CISPR Publication 22)/Class B. When connecting the machine to a computer, ensure that you use the following interface cables. A USB cable which must not exceed 2.0 metres in length. EU Directive 2002/96/EC and EN50419 This equipment is marked with the above recycling symbol. It means that all the end of the life of the equipment you must dispose of it separately at an appropriate collection point and not place it in the normal domestic unsorted waste stream. This will benefit the environment for all. (European Union only) International ENERGY STAR® Compliance Statement The purpose of the International ENERGY STAR® Program is to promote the development and popularization of energy-efficient office equipment. As an ENERGY STAR® Partner, Brother Industries, Ltd. has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. CLASS 1 LASER PRODUCT APPAREIL À LASER DE CLASSE 1 LASER KLASSE 1 PRODUKT