Aethra ISDN71 Technical Specifications

capability to investigate the ISDN world. This is achieved with the ISDN71 module that integrates the Aethra long-time experience on ISDN in the new generation modular tester. The card is able to characterize the S/T interface completely, allowing a full control of the communications occurring between TE and NT; the devices themselves can be checked as well. The available operating modes permit the simulation of both the Terminal Equipment and the Network Termination; in addition to these ones, the instrument can carry out a high impedance monitor on the S/T bus. On the other hand, the background monitor allows the user to execute a test and concurrently capture the D-channel signalling protocol. The acquired trace can be immediately analyzed on the screen or uploaded to a PC for further analysis. The SMART STATUSTM feature provides the user of some immediate information about the connection showing the ISDN Layer 1,2 and 3 status in a detailed and clear way. Moreover, all B-channel relevant data like loop, audio, called number, etc., are grouped in a specific page. The tests dealing with the call, BER, X.25, loop-box, automatic check of the access, help and lead the technician to a correct installation and a quick troubleshooting. The two hardware options (WT2071 and D1029) enrich the capabilities of the user as they offer him further tests and simulations concerning the S/T bus cabling and the check of the Terminal Equipment in standard and emergency mode. ISDN CARD FOR MULTI INTERFACE TESTER D2071 FEATURES AT A GLANCE
ISDN BRI S/T bus fully characterized
Automatic tests for immediate check of the ISDN line
In-depth BER test for line quality check
Status for D/B channel activity, INFOs and ISDN layers
Three operating modes for monitoring and simulations
”Live” capture and analysis of D-channel signalling protocol
Trace file uploaded to PC both during capture and off-line Modular philosophy All you need for measurements dealing with ISDN S/T bus interface Increased capabilities High impedance monitor in addition to back- ground monitor Hardware options Two chances to enlarge your action field, ISDN71 MODULE

• Features Extraneous voltage Crossed wires Short circuit Open wires Termination resistances, value in Ohm • Results Textual and graphical report of the state of the S/T Bus CONNECTORS • ISDN BRI S/T 4 wires RJ45 • Main unit 68 wires ENVIRONMENTAL CHARACTERISTICS • Dimension Weight ≈65 gr. Dimensions (mm) 54 (w) x 118 (l) x 33 (d) • Power Power supply from the main unit • Temperature Storage/Transport -40oC to +70 oC Operating, nominal -5oC to +45 oC Operating, limits -10oC to +55 oC • Humidity, non-condensing ≤93% RH @ 40 oC ≤70% RH @ 55 oC • User's Safety Aspects EN 61010-1,EN 60950,EN 41003 • EMC Aspects EN 55022, EN 55024, EN 61000-3-2 / -3-3 OPTIONS • 1WT2071 S/T Bus wiring test • 2D1029 Phantom power supplier on S/T Bus TELECOM INTERFACES • ISDN Basic Rate access S/T ITU-T (CCITT) Rec. I.430 ETS 300 012 OPERATING MODES • TE-S • MON-S • NT-S • S/T Bus wiring test (option1) SMART STATUSTM • Status levels ISDN 1,2 and 3 • D/B channel activity • INFOs • Pulse amplitude • Battery status BIT ERROR RATE TEST • G.821 statistics ES, SES, US, DM, PASS/FAIL • Pseudo-Random bit sequence User definable 211-1, 215-1, 223-1, 16 bits octet • Error Injection Manual, Single, Automatic AUTOMATIC ACCESS TEST • Fully automated Access test • Supplementary services automatic test • Programmable test sequence • X.25 on D-Channel check PROTOCOLS SUPPORTED • Simulation mode EDSS-1, Q.SIG, 1TR6, TN1R6®, VN4, X.25 over D channel, CorNet®-N, -T • Monitor mode EDSS-1, Q.SIG, 1TR6, TN1R6®, VN4, X.25, CorNet®-N, -T • Other protocols available DMS100, NI1, 5ESS TECHNICAL SPECIFICATIONS Aethra, the Aethra logo and ISDN71 are registered trademarks of Aethra SpA in Italy and in other Countries. All other company and product names may be registered trademarks or trademarks of their respective owners. All information provided by Aethra SpA in this datasheet is believed to be accurate. Aethra SpA reserves the right to discontinue and change specifications and prices at any time without notice. Copyright © 2005 Aethra SpA - All rights reserved. For further details about technical specifications please see “Products” on our website: www.aethra.com. Code 071075004GB Rev. 4 (02/04) Headquarters AETHRA® SpA via Matteo Ricci, 10 60020 Ancona (Italy) Telephone +39.071.218981 Fax +39.071.887077 Video 1 +39.071.2189160 Video 2 +39.071.2189701 Email: [email protected] www.aethra.com Aethra Offices Milan Bologna Rome Palermo Paris Madrid London Beijing Aethra Companies Aethra Inc. - Miami (USA) Aethra Ameris - São Paulo (Brazil) Aethra Mexico - MexicoCity (Mexico) Aethra Technology - Shenzen (China) Aethra Asia - Hong Kong (China) Code 071072013GB Rev. 0 (03/05)