THOMSON SpeedTouch 585 Setup

Guide (PC) Your Starter Pack Contents: 1 x Thomson Speedtouch 585 Wireless Router 1x Power Supply 1 x Telephone cable (grey) 1 x Ethernet cable (yellow) 2 x Microfilters 1x CD and Setup Guide Important You need to ensure that all the devices connected to your phone line are filtered in order for ADSL to work correctly. If you are unsure how the Microfilters that we have provided should be configured then look at the “Wiring and Filters” tutorial, available at http://usertools.plus.net/tutorials/ 1 Plug in your Thomson Speedtouch 585 router. Plug one end of the grey telephone cable into the DSL socket on the back of the router. 2 3 Turn on your wireless-enabled PC. Connect to the wireless network listed as SpeedTouch670C73. This is your new router. Ignore the initial security warning, you can secure your network after connecting. Open a web browser and enter the address http://192.168.1.254 this will bring up the Speedtouch home page. (see Figure 1) Figure 1 4 5 6 Troubleshooting If the DSL light continues to flash for more that a minute, check your ADSL cable and microfiters, and only use the cables provided in the pack. Ensure no other broadband equipment is installed on your computer. For more help, view the included foldout Quick Start Guide, or go to the support section of our portal website. Instructions continue on other side

8 Enter your username and password and click Connect. This will connect you to the Internet. 9 Congratulations - your Thomson Speedtouch 585 Wireless Router is now connected to your broadband account. You will be able to access the Internet from any computer on your network. Note that once these details have been set you should not need to enter them again. Simply start your email client or web browser and you will be connected automatically. PlusNet: [email protected] Force9: [email protected] Free-Online: [email protected] PlusNet UK: [email protected] Your broadband username is: