Tippmann BOSS Operator's Manual
Text of the manual
INDUSTRIAL PRODUCTS, INC.
BACK COVER
Rev: 06-06-07
READ THROUGH THIS MANUAL THOROUGHLY AND BECOME FAMILIAR
WITH THE TIPPMANN “BOSS” PARTS, OPERATION, AND SAFETY
PRECAUTIONS BEFORE YOU ATTEMPT TO OPERATE THIS MACHINE.
CONGRATULATIONS on your purchase of the Tippmann "BOSS"
hand stitcher sewing machine
3518 Adams Center Road, Fort Wayne, IN 46806
260/441-9603 • 866/286-8046 • FAX: 260/441-8
1. To Secure machine to existing work bench use three (3) 3/8"
bolts or lag screws of suitable length.
2. Attach the Stitching Handle to
the BOSS. Slide the Stitching
Handle onto the shaft & secure the
handle in position with bolt (HS
100-3).
3. Attach the Thread Stand.
1) Insert the Thread Stand Post
into the center of the thread stand
base and secure w
• Lower the needle foot
by pulling the stitch
handle until the
needle set screw
is visible.
• Loosen needle set
screw with furnished
allen wrench to allow
needle to be inserted
into needle bar hole.
• Insert needle
shank first,
fully into
needle bar
hole with
scarf spot
facing the
needle
set screw.
• With needle fully
inserted an
Place selected thread on thread
stand. Lead thread through all
threading points as shown.
Thread
Guide
Thread
Thread
Stand
Thread
Guide
Thread
Take-Up
Arm
Primary
Tensioner
Wheel
Secondary
Tensioner
Wheel
Thread
Guide
Guide
Post
Guide
Post
1. Loop thread over thread stand - Thread Guide
.
2. Pass thread through 2 holes in Thread Guide
.
3. Weave thread ar
