Lite-on Tech TR101 Operation & User’s Manual

USER’S MANUAL Intel® Celeron®, Coppermine®, Tualatin® Processor Motherboard Rev. 1.0

Item Checklist 1 TR101 Motherboard 1 Floppy Cable 1 ATA Cable 66/100 1 I/O Shield 1 CD for Motherboard Driver TR101 User Manual Quick Installation Guide Intel® Celeron®, Coppermine®, Tualatin® are registered trademark of Intel Corporation. Copyright © 2001, Lite-On Tech./ System BU

1. Always unplug the power cord when inserting any add-on card or module inside the system. 2. Use a grounded wrist strap before handling computer components. If one is not available, touch both of your hands to a safely grounded object or to a metal object. 3. Place components on a level grounded antistatic pad or on the packaging that came with the components whenever the components are separated from the system. 4. Keep equipment away from moisture and humidity. 5. Keep this User’s Manual for future reference.

Chapter 1. Introduction …………………………………………………………………… 1 Motherboard Specification …………………………………………………………………………. 1 TR100 Motherboard Layout …………………………………………………………………….…. 3 Chapter 2. Hardware Installation Process ……………………………………….. 4 Installing Central Process Unit (CPU) …………………………………………………………….. 4 Installing Memory Modules ………………………………………………………………………… 6 Connecting IDE and Floppy Disk Cables and Drives …………………………………………… 7 Installing Expansion Cards ………………………………………………………………………… 9 Connect Power Supply Cable ……………………………………………………………………. 10 I/O Back Panel Introduction ………………………………………………………………………. 11 Jumpers Introduction ……………………………………………………………………………… 13 Chapter 3. AMI® BIOS Setup ………………………………………………………….. 16 Entering Setup ……………………………………………………………………………………... 16 The Main Menu ……………………………………………………………………………………. 16 Standard CMOS Setup …………………………………………………………………………… 17 Advanced CMOS Setup ………………………………………………………………………….. 18 Advanced Chipset Setup ………………………………………………………………………… 19 Power Management Setup ……………………………………………………………………….. 20 PCI/Plug and Play Setup …………………………………………………………………………. 21 Peripheral Setup …………………………………………………………………………………… 22 Hardware Monitor Setup ………………………………………………………………………….. 23 Auto-Detect Hard Disks …………………………………………………………………………… 24 Change User Password …………………………………………………………………………... 25 Change Supervisor Password ……………………………………………………………………. 26 Auto Configuration with Optimal Settings ……………………………………………………….. 27 Auto Configuration with Fail Safe Settings ……………………………………………………… 28 Save Settings and Exit ……………………………………………………………………………. 29 Exit Without Saving ………………………………………………………………………………...30

Motherboard Specifications Form Factor: • Micro ATX Form Factor • Size 9.0” x 8.4”, Four Layer Board Processor: • Support Intel Celeron® / Pentium III / Tualatin®. • Intel Socket-370 mechanism for universal motherboard. • 66/100/133MHz Front Side Bus frequency. Cache Memory: • Processor integrated on-die 32KB level-one (L1) and 128KB/256KB level-two (L2) cache. System Memory: • 2 DIMM Sockets support up to 512MB memory capacity. • Support PC100 SDRAM DIMM module. • Un-buffered, Non-ECC DIMM only. Core Logic Chipset: • Intel 810E GMCH (Graphics and Memory Controller Hub). • ICHX (I/O Controller Hub). PCI bus: • PCI 2.2 compliant. • PME# and 3.3V Aux signals to support power management. Audio/Modem: • AC’97 interface in ICHX. • AC’97 CODEC ADI AD1885. • Compliant with AC’97 revision 2.1 specification. • 3 Audio jacks (Line out, Line In, Mic In). • 3 Audio headers (CD In, Modem In, Aux In). • Front audio headers (Line In, Mic In)

• 2 Bus Master IDE Ports (Up to 4 IDE devices). Support Ultra DMA 33/66 MB/sec integrated in ICHX. On Board I/O: • LPC revision 1.0 super I/O controller Winbond W83627HF. • 1 Floppy connector. • Stacked PS/2 keyboard & mouse connector. • 4 USB ports, Dual stacked ports at back and 2 at front header (W81181D Option). • 1 Parallel port (ECP/EPP). • 1 Serial port. • 1 Serial port header. • Hardware monitor capability by Winbond W83627HF (Option). • 3 Fan headers. Integrated Graphics: • Integrated full 2D/3D/DirectX acceleration. (AGP 2X Mode). • Integrated 230MHz RAMDAC and hardware motion compensation (30 frame/sec). • Desktop display modes up to 1600x1200x8bit @ 85Hz. • 4MB Video Display Cache (Option). • 1 VGA output port. Additional Features: • Wake-on-LAN function. • Wake-on-Ring function. • Keyboard/Mouse/USB wake up function. • Supports S1, S3, S4 and S5 ACPI states. Expansion Slots: • 3 PCI slots.

A CPU Socket H Front Side USB B CPU Fan Socket I Expansion Slots C Memory Sockets J Audio Connector D Power Supply Connector K Back Panel Connectors E Floppy Connector L COM 2 Port F IDE Connectors M Jumper Connector G Front Panel Connector Front Panel Connector Pin Definition Pin Signal Name I/O Description 1 HD_PWR O Hard Disk LED pull-up to VCC 2 HDR_BLNK_GRN O Front panel Green LED signal 3 HDA* O Hard Disk Active LED signal 4 HDR_BLNK_YEL O Front panel Yellow LED signal 5 GND - Ground 6 FPBUT_IN I Front panel On/Off button signal 7 FP_RESET* I Front panel Reset button signal 8 GND - Ground 9 VCC O 10 FPSLP* I Front panel sleep button signal 11 IRRX I IRDA serial input 12 GND - Ground 13 GND - Ground 14 KEY - KEY 15 IRTX O IRDA serial output 16 VCC O 17 NC - not connected 18 NC - not connected A B C D E F G H J K I L M

Installing the Central Process Unit (CPU) CPU Installation 1. Unlock the CPU socket by pulling the lever up to a 90-degree angle. 2. Position the CPU above the socket such that the marked corner (pin1) matches the corner near the base of the lever. 3. Place the CPU into the socket. If the CPU is unable to insert properly, check its orientation and attempt to re-install. Warning! Do not force the CPU into the socket. Doing so will prompt bending of the pins and create damage to the CPU. 4. Close the socket by lowering the lever and locking the lever in place. 90 degree angle

CPU Heat Sink Installation 1. Read the related CPU heat sink user’s manual for more detailed installation procedures. 2. Connect CPU fan power cable into the CPU fan connector on the motherboard. CPU Fan Connector

1. Push the white retaining clips on each of the memory socket outwards. 2. Match the notches on the contact edge of the memory module to the ridges in the memory socket. 3. Insert the memory module vertically into place. When properly inserted, the white retaining clips will move inward to lock in the module. 4. Repeat installation process when adding additional modules. Total Memory Sizes With SDRAM DIMM Devices used on DIMM 1 DIMMx64/x72 2 DIMMsx64/x72 64 Mbit (2Mx8x4 banks) 128 MBytes 256 MBytes 64 Mbit (1Mx16x4 banks) 64 MBytes 128 MBytes 128 Mbit (4Mx8x4 banks) 256 MBytes 512 MBytes 128 Mbit (2Mx16x4 banks) 128 MBytes 256 MBytes 256 Mbit (4Mx16x4 banks) 256 MBytes 512 MBytes Retaining Clip

1. Connecting the floppy disk ribbon cable into the motherboard. The side of the cable with the red stripe needs to be inserted into the Pin1 side of the floppy disk connector. 2. Connecting the IDE ribbon cable into the motherboard. The side of the cable with the red stripe should be inserted into Pin1 side of the IDE connector. Floppy Connector IDE Connectors Red Stripe to Pin1 Red Stripe to Pin1

NOTE: If installing two IDE devices on the same ribbon cable, one device is to be set as “master” and the second as “slave”. Please refer to IDE device manuals for master and slave settings. 1. Mount the desired drives into the chassis case. 2. Connect the floppy disk ribbon cable and power cable into the device. The side of the cable with the red stripe must be inserted to Pin1 of the floppy disk drive. 3. Connect the IDE ribbon cable and power cable into the device. The side of the cable with the red stripe must be inserted to Pin1 of the hard drive. Power Cable Floppy Disk Drive Floppy Disk Ribbon Cable Hard Disk Drive Power Cable IDE Ribbon Cable

1. Read the related expansion card’s installation instructions before inserting the expansion card into the motherboard. 2. Remove the slot covers from the chassis case where the expansion cards will be placed. 3. Press the expansion card firmly into the expansion slot of the motherboard. 4. Secure the card with the screw provided. 5. Repeat same procedure when adding additional expansion cards.

NOTE: The ATX power connector is keyed for proper insertion. 1. Place the plastic clip of the power connector over the plastic tab on the motherboard power connector. The plastic clip should lock into the plastic tab. Power Supply Connector

(1) PS/2 Keyboard and PS/2 Mouse Connector This connector supports standard PS/2 keyboard and PS/2 mouse. (2) Parallel Port and Serial Ports (COM1/COM2) This connector supports 2 standard COM ports and 1 Parallel port. Devices (i.e. printer) can be connected into the Parallel port. Devices (i.e. mouse, modem, monitor etc. can be connected into the Serial ports.) PS/2 Mouse Connector (6 pin Female) PS/2 Keyboard Connector (6 pin Female) Parallel Port (25 pin Female) COM 1 COM 2 Serial Ports (9 pin Male)

(3) USB Connector Before connecting device(s) into the USB connections, determine if devices have a standard interface. Make sure your computer Operating System (OS) supports the USB controller. If not, contact your OS or device(s) vendors for more information. (4) Game Port This connector supports joystick, MIDI keyboard and other related audio devices. (5) Audio Connectors Once onboard audio driver has been installed, the speakers may be connected into the Line out jack, audio devices such as CD-ROM etc., and a microphone into the MIC in jack. Line out Line In MIC in USB 1 USB 2

PIN 1 PIN 1 OFF ON (1-2) FWH Lock This jumper allows you to set FWH lock. Reference: JP1 Connector Type: 1 x 3 JP1 Description Jumper Placement 1-2 FWH Lock Put the jumper cover on pin1 and pin2. 2-3 FWH Unlock (Default) Put the jumper cover on pin2 and pin3. Safe Speed This jumper allows you to set safe speed. Reference: JP2 Connector Type: 1 x 3 male straight 0.100 JP2 Description Jumper Placement 2-3 Safe Speed Put the jumper cover on pin1 and pin2. 1-2 Normal Mode(Default) Put the jumper cover on pin2 and pin3.

Clear CMOS (Optional) This jumper allows you to clear the content of the CMOS. Reference: JP1 Connector Type: 1 x 3 JP1 Description Jumper Placement 1-2 Normal Put the jumper cover on pin1 and pin2. 2-3 Clear content of CMOS Put the jumper cover on pin2 and pin3. Clear Password This jumper allows you to clear the password of the BIOS. Reference: JP4 Connector Type: 1 x 3 JP4 Description Jumper Placement 1-2 Normal (Default) Put the jumper cover on pin1 and pin2. 2-3 Clear BIOS password Put the jumper cover on pin2 and pin3.

The following table shows the Front Side USB Connector Pin Definition. J19 Front Side USB Connector Pin Definition Pin Signal Name Description 1 V2+ Front Side USB Port2 VCC 2 V1+ Front Side USB Port1 VCC 3 USB2+ Front Side USB Port2 Signal+ 4 USB1+ Front Side USB Port1 Signal+ 5 USB2- Front Side USB Port2 Signal- 6 USB1- Front Side USB Port1 Signal- 7 GND2 Front Side USB Port2 GND 8 GND1 Front Side USB Port1 GND 9 NC No Connect 10 USBOC USB Over-Current Detect USB1+ V1+ V2+ USB2+ USB2- USB1- GND2 GND1 NC USBOC

Entering Setup To enter the setup menu, first power up the computer and press key to enter the CMOS setup. The Main Menu When you enter the AMI® HIFLEX Setup Utility, the below Main Menu will appear. The Main menu allows you to select and modify your computer system. To navigate through the menu, simply use the arrow keys to select among the items and press to accept or enter the sub-menu. AMI HIFLEX SETUP UTILITY - VERSION 1.37 ©2001 AMERICAN MEGATRENDS, INC. ALL RIGHTS RESERVED TR101 BIOS Rev: 1.00 Standard CMOS Features Advanced CMOS Features Advanced Chipset Features Power Management Setup PCI / Plug and Play Setup Peripheral Setup Hardware Monitor Setup Auto-Detect Hard Disks Change User Password Change Supervisor Password Auto Configuration with Optimal Setting Auto Configuration with Fail Safe Settings Save Settings and Exit Exit without Saving Standard CMOS setup for changing time, date, hard disk type, etc. ESC: Exit KL: Sel F2/F3: Color F10: Save & Exit

The items listed in the Standard CMOS Features Menu may include no or more than one setup items. Use the arrow keys to navigate through the menu and use the or keys to select the desired value for each item. Date (mm/dd/yyyy) : Wed Nov 28,2001 Base Memory: 639KB Time (hh/mm/ss) : Extd Memory: 126MB Floppy Drive A: Floppy Drive B: LBA BLK PIO 32Bit Type Size Cyln Head Wpcom SecMode Mode Mode Mode Pri Master: Pri Slave: Sec Master: Sec Slave: Boot Sector Virus Protection: Disabled Month: Jan-Dec ESC: Exit KL: Sel Day: 01-31 PgUp/PgDn: Modify Year: 1980-2099 F1: Help F2/F3: Color AMIBIOS SETUP - STANDARD CMOS SETUP ©2001 AMERICAN MEGATRENDS, INC. ALL RIGHTS RESERVED

The items listed in the Advanced CMOS Features Menu may include no or more than one setup items. Use the arrow keys to navigate through the menu and use the or keys to select the desired option for each item. 1st Boot Device Disabled Available Options: 2nd Boot Device Floppy 3rd Boot Device Disabled Try Other Boot Devices Yes Intitial Display Mode Silent S.M.A.R.T for Hard Disk Disabled Floppy Drive Seek Disabled System Keyboard Present Password Check Always CPU Serial Number Disabled C000, 16K Shadow Enabled C400, 16K Shadow Enabled C800, 16K Shadow Enabled ESC: Exit KL: Sel PgUp/PgDn: Modify F1: Help F2/F3: Color AMIBIOS SETUP - ADVANCED CMOS SETUP ©2001 AMERICAN MEGATRENDS, INC. ALL RIGHTS RESERVED

The items listed in the Advanced Chipset Setup Menu may include no or more than one setup items. Use the arrow keys to navigate through the menu and use the or keys to select the desired option for each item. CPU Ratio Selection Locked System Memory Frequency Auto DRAM Refresh 15.6uS DRAM Cycle time (SCLKs) 6/8 CAS# Latency (SCLKs) 3 RAS to CAS delay (SCLKs) 3 SDRAM RAS# Precharge (SCLKs) 3 AGP Aperture Size 64MB CPU Latency Timer Enabled USB Controller All USB Port USB Device Legacy Support All Device Local Memory Frequency 133Mhz Initialize Display Cache Memory Enabled Paging Mode Control Open RAS-to-CAS Default CAS Latency Slow RAS Timing Slow ESC: Exit KL: Sel RAS Precharge Timing Slow PgUp/PgDn: Modify F1: Help F2/F3: Color AMIBIOS SETUP - ADVANCED CHIPSET SETUP ©2001 AMERICAN MEGATRENDS, INC. ALL RIGHTS RESERVED

The items listed in the Power Management Setup Menu may include no or more than one setup items. Use the arrow keys to navigate through the menu and use the or keys to select the desired option for each item. AMIBIOS SETUP – POWER MANAGEMENT SETUP ©2001 AMERICAN MEGATRENDS, INC. ALL RIGHTS RESERVED ACPI Standby State S3/STR Available Options: Power Management/APM Enabled Suspend Time Out Disabled Power Button Function On/Off Restore on AC/Power Loss Last State Resume on Ring Disabled Resume on LAN Enabled Resume On PME Enabled Resume On RTC Alarm Disabled Alarm Date 15 Alarm Hour 12 Alarm Minute 30 Alarm Second 30 ESC: Exit KL: Sel PgUp/PgDn: Modify F1: Help F2/F3: Color

The items listed in the PCI/Plug and Play Setup Menu may include no or more than one setup items. Use the arrow keys to navigate through the menu and use the or keys to select the desired option for each item. AMIBIOS SETUP – PCI/PLUG AND PLAY SETUP ©2001 AMERICAN MEGATRENDS, INC. ALL RIGHTS RESERVED Plug and Play Aware O/S No Available Options: Primary Graphics Adapter External AGP OnBoard VGA Status Enabled ESC: Exit KL: Sel PgUp/PgDn: Modify F1: Help F2/F3: Color

keys to navigate through the menu and use the or keys to select the desired option for each item. AMIBIOS SETUP – PERIPHERAL SETUP ©2001 AMERICAN MEGATRENDS, INC. ALL RIGHTS RESERVED OnBoard IDE Both Available Options: OnBoard AC’97 Audio Enabled OnBoard FDC Auto OnBoard Serial PortA Auto OnBoard Serial PortB Auto Serial PortB Mode Normal IR Duplex Mode Half Duplex IR Receiver Polarity Active Low IR Xmitter Polarity Active Low OnBoard Parallel Port Auto Parallel Port Mode ECP Parallel Port IRQ Auto Parallel Port DMA Channel Auto ESC: Exit KL: Sel PgUp/PgDn: Modify F1: Help F2/F3: Color

The items listed in the Hardware Monitor Setup may include no or more than one setup items. Use the arrow keys to navigate through the menu and use the or keys to select the desired option for each item. AMIBIOS SETUP – HARDWARE MONITOR SETUP ©2001 AMERICAN MEGATRENDS, INC. ALL RIGHTS RESERVED -= System Hardware Monitor =- Available Options: CPU Temperature 40°C/104°F System Temperature 30°C/86°F CPU Fan Speed 3613 RPM Chassis Fan Speed 0 RPM Vccp (Processor) 1.717V +12.0V 12.422V +1.85V 1.872V +5.0V 4.911V +3.3V 3.233V +2.5V 2.492V +1.5V 1.509V FAN Speed Control Disabled Chassis Intrusion Disabled ESC: Exit KL: Sel PgUp/PgDn: Modify F1: Help F2/F3: Color

The items listed in the Auto-Detect Hard Disk Menu may include no or more than one setup items. Use the arrow keys to navigate through the menu and use the or keys to select the desired option for each item. AMIBIOS SETUP - STANDARD CMOS SETUP ©2001 AMERICAN MEGATRENDS, INC. ALL RIGHTS RESERVED Date (mm/dd/yyyy) : Wed Nov 28,2001 Base Memory: 639KB Time (hh/mm/ss) : Extd Memory: 126MB Floppy Drive A: Floppy Drive B: LBA BLK PIO 32Bit Type Size Cyln Head Wpcom Sec Mode Mode Mode Mode Pri Master: Pri Slave: Sec Master: Sec Slave: Boot Sector Virus Protection: Disabled Month: Jan-Dec ESC: Exit KL: Sel Day: 01-31 PgUp/PgDn: Modify Year: 1980-2099 F1: Help F2/F3: Color

The items listed in the Auto-Detect Hard Disk Menu may include no or more than one setup items. Use the arrow keys to navigate through the menu and use the or keys to select the desired option for each item. AMI HIFLEX SETUP UTILITY - VERSION 1.37 ©2001 AMERICAN MEGATRENDS, INC. ALL RIGHTS RESERVED TR101 BIOS Rev: 1.00 Standard CMOS Features Advanced CMOS Features Advanced Chipset Features Power Management Setup PCI / Plug and Play Setup Peripheral Setup Hardware Monitor Setup Auto-Detect Hard Disks Change User Password Change Supervisor Password Auto Configuration with Optimal Setting Auto Configuration with Fail Safe Settings Save Settings and Exit Exit without Saving Change user password ESC: Exit KL: Sel F2/F3: Color F10: Save and Exit Enter new user password: _

The items listed in the Change Supervisor Password Menu may include no or more than one setup items. Use the arrow keys to navigate through the menu and use the or keys to select the desired option for each item. AMI HIFLEX SETUP UTILITY - VERSION 1.37 ©2001 AMERICAN MEGATRENDS, INC. ALL RIGHTS RESERVED TR101 BIOS Rev: 1.00 Standard CMOS Features Advanced CMOS Features Advanced Chipset Features Power Management Setup PCI / Plug and Play Setup Peripheral Setup Hardware Monitor Setup Auto-Detect Hard Disks Change User Password Change Supervisor Password Auto Configuration with Optimal Setting Auto Configuration with Fail Safe Settings Save Settings and Exit Exit without Saving Change the supervisor password ESC: Exit KL: Sel F2/F3: Color F10: Save and Exit Enter new supervisor password: _

The items listed in the Auto Configuration with Optimal Setting Menu may include no or more than one setup items. Use the arrow keys to navigate through the menu and use the or keys to select the desired option for each item. AMI HIFLEX SETUP UTILITY - VERSION 1.37 ©2001 AMERICAN MEGATRENDS, INC. ALL RIGHTS RESERVED TR101 BIOS Rev: 1.00 Standard CMOS Features Advanced CMOS Features Advanced Chipset Features Power Management Setup PCI / Plug and Play Setup Peripheral Setup Hardware Monitor Setup Auto-Detect Hard Disks Change User Password Change Supervisor Password Auto Configuration with Optimal Setting Auto Configuration with Fail Safe Settings Save Settings and Exit Exit without Saving Load configuration settings giving highest performance ESC: Exit KL: Sel F2/F3: Color F10: Save and Exit Load high performing setting (Y/N)? N

The items listed in the Auto Configuration with Fail Safe Settings Menu may include no or more than one setup items. Use the arrow keys to navigate through the menu and use the or keys to select the desired option for each item. AMI HIFLEX SETUP UTILITY - VERSION 1.37 ©2001 AMERICAN MEGATRENDS, INC. ALL RIGHTS RESERVED TR101 BIOS Rev: 1.00 Standard CMOS Features Advanced CMOS Features Advanced Chipset Features Power Management Setup PCI / Plug and Play Setup Peripheral Setup Hardware Monitor Setup Auto-Detect Hard Disks Change User Password Change Supervisor Password Auto Configuration with Optimal Setting Auto Configuration with Fail Safe Settings Save Settings and Exit Exit without Saving Load failsafe configuration settings ESC: Exit KL: Sel F2/F3: Color F10: Save and Exit Load failsafe settings (Y/N)? N

The items listed in the Save Settings and Exit Menu may include no or more than one setup items. Use the arrow keys to navigate through the menu and use the or keys to select the desired option for each item. AMI HIFLEX SETUP UTILITY - VERSION 1.37 ©2001 AMERICAN MEGATRENDS, INC. ALL RIGHTS RESERVED TR101 BIOS Rev: 1.00 Standard CMOS Features Advanced CMOS Features Advanced Chipset Features Power Management Setup PCI / Plug and Play Setup Peripheral Setup Hardware Monitor Setup Auto-Detect Hard Disks Change User Password Change Supervisor Password Auto Configuration with Optimal Setting Auto Configuration with Fail Safe Settings Save Settings and Exit Exit without Saving Write the current settings to CMOS and exit ESC: Exit KL: Sel F2/F3: Color F10: Save and Exit Save current settings and exit (Y/N)? Y

The items listed in the Exit without Saving Features Menu may include no or more than one setup items. Use the arrow keys to navigate through the menu and use the or keys to select the desired option for each item. AMI HIFLEX SETUP UTILITY - VERSION 1.37 ©2001 AMERICAN MEGATRENDS, INC. ALL RIGHTS RESERVED TR101 BIOS Rev: 1.00 Standard CMOS Features Advanced CMOS Features Advanced Chipset Features Power Management Setup PCI / Plug and Play Setup Peripheral Setup Hardware Monitor Setup Auto-Detect Hard Disks Change User Password Change Supervisor Password Auto Configuration with Optimal Setting Auto Configuration with Fail Safe Settings Save Settings and Exit Exit without Saving Exit without saving the current settings ESC: Exit KL: Sel F2/F3: Color F10: Save and Exit Quit without saving (Y/N)? N