Aethra D2061 Technical Specifications

one of the smallest, lightest and easy to handle devices on the market. Thanks to the ‘Universal Modem’ feature, this tester is able to simulate the user’s modem and host checking each critical point of an ADSL connection and obtaining a complete set of parameters such as line bit rate and occupation capacity, but also connection bit rate both Fast and Interleaved path, noise margin and bit per tone allocation. Like all the measurement devices made by Aethra®, it offers helpful features for the technician in installation, maintenance and troubleshooting phases. The graphic user interface, common to the test instruments family of new generation made by Aethra®, satisfies all the user’s needs. Navigating through the various menus is both easy and immediate thanks to the bright, back-lit, high resolution display as well as the zoom feature. The features PREDEFINED TESTS and HISTORY, are used to manage and store personalized test setups and to recall the results of each test performed. This, together with the possibility to create a personal most used tests list, make the technician daily tasks simpler by avoiding possible setup errors and allowing also subsequent analysis of the results obtained. The Smart Status™ feature allows the modem, the line and the device status to be displayed immediately. In particular, is shown the number of bits per tone assigned both in graphical and tabular format, the error count, events and anomalies on the line, the current and historical alarm status and evolved statistics about ATM level. Thanks to Smart Status™the user has all the necessary information at a glance, just by pushing a button. D2061ADSL TESTER Smart troubleshooting tool Powerful background monitor Multi layer tester ADSL, ATM and IP layer tests Ideal companion for installers Light weight, small footprint, robust, OVER POTS – OVER ISDN FEATURES AT A GLANCE
Specific ATM layer tests
Complete IP layer feature including PPP and file transfer simulation
Ethernet 10Base-T port for through (Bridge) mode
Multi-protocol monitor and analysis including frames decoding
Predefined test set-ups to save time on site
Test results saving for subsequent analysis
Includes PC108 for WindowsTM software for powerful analysis and remote management
In field upgradable firmware

modem events. During the active phase of the connection, all the AAL-5 packets are captured as well. Moreover, it is possible to capture and decode communication protocol events over ISDN D channel1. In POTS mode, the D2061 is able to perform high impedance monitoring of POTS2 events. Advanced analysis through the PC software3 issued with the device, helps to solve also more complex ADSL connections problems. • Physical layer monitoring with alarms and error checks • Line events analysis • AAL-5 encapsulation decoding • D1 channel and POTS2 line monitoring • Real time and off-line decoding • Capturing filters • G.826/M.2100 statistics information CONNECTION Through this test, it is possible to control all ADSL connection data both for Upstream and Downstream sides. The costumer’s contractual parameters verification is immediate and easily interpretable. • ATM Fast/Interleaved bit rate • ATM maximum line rate • Relative capacity • Noise margin • Attenuation • Output power ATM 5 Whit the use of this test, it is possible to verify the correct working of the ATM layer, up to the ATM termination unit. This test allows OAM as well as AAL-5 cells generation to be performed with response times (ms), errors and statistics5. • OAM cells generation, F4 and F5 type • AAL-5 packets generation test • Loop-back OAM cells management • Programmable number of Ping requests • Errors and statistics • Waiting response time (sec.) IP 6 Thanks to IP PING test, the D2061, checks the connection to the Internet Provider, whether a remote host is reachable or not and the relative response times6. Moreover, all the information from the server such as messages, local, remote and server IP addresses and IP TRACE ROUTING is provided. This allows the correct connection settings of the user to be checked. The IP GENERATE TRAFFIC test, allows a data transfer between hosts to be simulated. This test, more exhaustive than IP PING, is able to measure the throughput of the connection in progress. • IP Bridge, IP Router, PPPoE, PPPoA • PPP, IP, UDP, DHCP, DNS, ICMP, TFTP support • PAP and CHAP (MD5) authentication • Static and Dynamic IP address • Gateway management and address • Settable packet length and testing file • IP statistics and response times • Throughput calculation • IP address book, password and User ID for immediate login to Internet • IP Trace Routing with 30 hops disovering BER Equipped with an appropriate option1, the D2061 can perform specific tests over S/T- Bus for line quality verification (BERT) and for ISDN basic access general control. • G.821 • Different test pattern • Test modes End-to-End and Selfcall • Errors injection ETHERNET 7 The D2061 is able to replace the user‘s modem and to permit the Internet navigation by the use of a PC with 10Base-T network connection. With this option, it is possible to verify the connection throughput thanks to the exaustive statistics features available for physical, ATM and Ethernet layers. The powerful capturing feature of the single AAL-5 frames and the analysis facilities of PC108 software, allow to solve all the problems regarding connections to ISPs, without using expensive systems • Internet access troubleshooting • Host and Modem simulation • Advanced statistics information MISCELLANEOUS Thanks to the integrated microphone and loudspeaker the D2061 is able to simulate both analogue POTS2 and ISDN1 telephones. With the AUTOMATIC TESTS the user can quickly verify the ISDN line under control and, if not otherwise specified, the device generates automatically a series of calls and verifies the complete status of the line. • Loopbox • Evolved POTS terminal simulation • Line Noise test • Physical layer settings control • Layer 2 configuration • Availability status of the several bearer services, tele and supplementary services • Availability check of single B channels 1 ST2061 2 AB2001N 3 PC108 for Windows™ 4 MF206x 5 ATM2061 6 IP2061 7 ETH2061

ATU-R ITU-T (CCITT) Rec. ITU-T-I.361, ITU-T- I.363.5, ITU-T- I.432, ITU-T- I.610, ITU-T-I.731 • ISDN Basic Rate [ST2061] S/T ITU-T (CCITT) Rec.I.430, ETS 300 012 ADSL LAYER • D2061 over POTS1 Full Rate ANSI T1.413 issue 2 G.DMT G.992.1,Annex A (ADSL over POTS) G.Lite G.992.2 Multimode • D2061-I over ISDN2 G.DMT G.992.1,Annex B (ADSL over ISDN) Others ADSL over POTS/ISDN U-R2 (T-DSL) Alcatel ADSL over ISDN ETSI DTS/TM • Handshake G.994.1 (ex G.Hs) 1-2Only one module at time is available from the factory ATM LAYER [ATM2061 OPTION] • Stack OAM Implementation F4 and F5 OAM loopback cells OAM ITU-T I.610 ATM Adaptation Layer AAL-5 VC channel selection Settable by the User • Multiplexing methods LLC/SNAP or VC Multiplexed IP/PPP LAYER [IP2061 OPTION] • Stack Data encapsulation methods IP over ATM Bridged, IP over ATM Routed, PPP over ATM, PPP over Ethernet RFC number RFC2684 (ex 1483), 2225, 2364, 2516 • PPP Client, Server OPERATING MODES • ADSL ATU-R ATU-R + Host Through mode (BRIDGE) ETH2061 option • ETHERNET Host ETH2061 option • ISDN TE-S (BRI) ST2061 option • POTS TE AB2001N option MON AB2001N option BACKGROUND MONITOR • Events ADSL parameters, alarms, errors, AAL-5 packets • ISDN D channel monitor ST2061 option • POTS line monitor AB2001N option • Programmable filters Independent filters capturing and displaying • Analysis of the results stored into PC with PC108 for Windows™ SMART STATUS™ • Physical layer G.826 / M.2100 • ADSL line ES, SES, BBER, UAS, DMT bit per tone, graphic and table format, alarms and errors • ATM layer Tx/Rx cells counters, AIS-RDI-LB OAM cells counters, unmapped cells counter, VCs (VCI/VPI) of unmapped cells [ATM2061] • ISDN line Status levels ISDN 1, 2 and 3 clearly displayed [ST2061] ADSL MONITOR ANALYSIS • Stand alone decoding ADSL and AAL-5 • ADSL events decoding Graphical and tabular format • ATM header decoding • AAL-5 decoding Hexadecimal decoding LLC, PPPoE discovery, grouped by levels ARP and MAC discovery Address Payload, Trailer CONNECTION • ADSL line mode • ADSL maximum bit rate Kbps (DW/UP) • Operative ATM speed rate (DW/UP) • Relative Capacity % (DW/UP) • Noise Margin dB (DW/UP) • Attenuation dB (DW/UP) • Output Power dBm (DW/UP) • ATU-C manufacturer & version ANSI mode BIT PER TONE • Number of bits per tone, frequency and bit per tone value • Cursors Moved along the graphic, provide information for each tone • Display 128, 256 tones • Results format Table, Graphic TECHNICAL SPECIFICATIONS

• VCI / VPI Statistics and Errors • Type of cell F4 end-to-end, F4 segment, F5 end-to-end, F5 segment • Location ID (end-to-end) User defined • ATM OAM cell Management • Type of Test ATM PING, OAM & AAL-5 packets test, Traffic Generator IP [IP2061 OPTION] • IP address supported Static, Dynamic (DHCP) • Authentication protocol PPP PAP, CHAP (MD5) • Gateway selection IP Bridged mode • LLC/SNAP encapsulation User defined • Type of Test IP Ping (ICMP), IP generate traffic (TFTP) LOOP-BOX FEATURE [ST2061 OPTION] AUTOMATIC ACCESS TEST [ST2061 OPTION] • Fully automated Access test • Automatic supplementary services test • Programmable test sequence BIT ERROR RATE TEST [ST2061 OPTION] • G.821 statistics ES, SES, US, DM, PASS/FAIL • Pseudo-Random bit sequence User definable 211-1, 215-1, 223-1, 16 bits octet • Error Injection Manual, Single, Automatic HISTORY AND PREDEFINED TESTS FEATURES • Saving and recalling of 10 different setup and results for each kind of test CONNECTORS • ADSL line interface 2 wires RJ11 • AUX DB15-HD • RS232 Mini - DIN 4 (ISO 4902) • Handset 4 wires RJ9. Balanced • Power in External AC/DC adapter 4 wires ENVIRONMENTAL CHARACTERISTICS • Dimension Weight, with battery ≈500 gr. Dimensions, with holster (mm) 100 (w) x 180 (l) x 50 (d) • Power Battery Type Rechargeable, Ni-MH Battery life ≈3 hrs @ 25°C,LCD back-lit off External AC/DC adapter 115/230Vac ±10% @ 50/60Hz • Temperature Storage/Transport -40oC to +70 oC Operating, nominal -5oC to +45 oC Operating, limits -10oC to +55 oC • Humidity, non-condensing ≤93% RH @ 40 oC ≤70% RH @ 55 oC • User's Safety Aspects EN 61010-1,EN 60950,EN 41003 • EMC Aspects EN 55022, EN 55024, EN 61000-3-2 / -3-3 • CE Marking Class B (residential devices) MISCELLANEOUS • LCD display 320x200 Graphic display wide bright and back-lit, with Zoom function • Internal microphone & loudspeaker • Upgradable firmware By RS232 port • MF206x, POTS Microfilter Option OPTIONS • ATM2061 ATM Stack and Statistics • IP2061 IP Suite Test • ETH2061 Bridge mode adapter • ST2061 ISDN BRI-S/T terminal simulator • AB2001N POTS Terminal Simulator and Monitor Aethra, the Aethra logo and D2061 are trademarks, registered trademarks, or service marks of Aethra SpA Telecommunications in Italy, the United States, and/or other countries. All other company and product names may be registered trademarks or trademarks of their respective owners. Information furnished by Aethra SpA Telecommunications and Aethra, Inc. in this datasheet is believed to be accurate. Products sold and licensed by Aethra SpA Telecommunications and Aethra, Inc. are covered by warranty and patent indemnification provisions appearing in its purchase and license agreements. Aethra SpA Telecommunications and Aethra, Inc. reserve the right to discontinue production and change specifications and prices at any time without notice. Copyright ©2004 Aethra SpA Telecommunications - All rights reserved. Additional regional offices are located on our website: www.aethrausa.com. For further details about technical specifications please see “Products” on www.aethra.com Code 071062009GB Rev.1 (10/04) Aethra SpA Telecommunications via Matteo Ricci 10 60020 Ancona - Italy Telephone +39.071.218981 Fax +39.071.887077 Video 1 +39.071.2189160 Video 2 +39.071.2189701 Email: [email protected] www.aethra.com Aethra, Inc. 701 Brickell Avenue Suite 1390 Miami, FL 33131 USA Telephone +1.305.375.0010 Toll Free (US only) 1.888.4.AETHRA Fax +1.305.375.0655 Video +1.305.577.3524 Email: [email protected]