Aethra D2500 Specifications
Read Online
Read the Aethra D2500 Specifications online using the built-in PDF viewer.
Text of the manual
The D2500 Telecom Analyzer
is the culmination of thirty years
of experience that Aethra has
in the development and
production of test instruments.
It has been designed to meet
the requirements of technicians
working in the Telecoms industry,
and its range of capabilities
makes it an indispensable
toolkit - probably the only tester
the engineer needs to carry
around with him.
Wide range of features
The D2500 to address a wider range of applications such as
Service Verification over PRI, BRI, Frame Relay Links, WAN
and ISDN lines, and also testing of DCE/DTE connections over
a range of interfaces. Additionally, testing for G.SHDSL, HDSL
and IP across the Internet is also provided.
Graphic interfaces
The new, improved Graphical User Interface uses smart
windows drop-down menus. This makes navigating around
the configuration procedures extremely easy and minimizes
time required to achieve proficiency with the tester.
Smart Status™
This feature is always available - even while a test is in progress,
thus allowing continuous monitoring of clock frequency,
alarms, errors, PCM time-slot status, channel configurations
and test parameters, as well as the unit’s own device status.
Telecom analyzer
ISDN & Telecom standards
On board support for multiple protocols
WAN & DATACOM
Leased line & Datacom
Pre-Qualification Testing
Flexible Operation
Control all Functions locally
or via Remote Control
Aethra and the Aethra logo are registered trademarks of Aethra SpA in Italy and in other Countries. All other company and product names may be registered trademarks or trademarks of their respective owners.
All information provided by Aethra SpA in this datasheet is believed to be accurate. Aethra SpA reserves the right to discontinue and change specifications and prices at any time without notice. Copyright © 2006 Aethra SpA
All rights reserved. For further details about technical specifications please see “Products” on our website: www.aethra.com.
AETHRA® SpA
via Matteo Ricci, 10
60126 Ancona (Italy)
Telephone +39.071.218981
Fax +39.071.887077
Video 1
+39.071.2189704
Video 2
+39.071.2189701
Beijing Hong Kong London Madrid
Mexico City Paris Miami São Paulo
Shanghai Shenzhen
Email:[email protected]
www.aethra.com
Telecom interfaces
• Basic Rate Access
S/T
ITU-T Rec.I.430, ETS 300 012
U
2B1Q and 4B3T, TS 102 080
• Primary Rate Access
Interface
CCITT G.703 (2Mbps) / G.704
E1
ITU-T Rec.I.431, ETS 300 011
2Mbit
PCM30/CRC, PCM31/CRC,
Unframed
• WAN/Datacom (option)
Sync
X.21/V.11, V.24, V.35,
V.36 (RS449), G.703 co-dir
Bit Rates
50bps - 2048Kbps (Nx64)
Async
V.24 (RS232)
Bit Rates
50bps - 230400bps
V.11/X.21 interface
Integrated on board
(VX21-2500 option)
Clock frequency
Measurement (±1Hz) and
shift management (±100ppm)
Protocols supported
• Simulation mode
EDSS-1, Q.SIG, 1TR6,
TN1R6®, VN4, X.25, X.31,
DASS-2, DPNSS, CorNet®-N,
-NX, -NQ, -T, PPP, IP, UDP,
DHCP, ICPM, TFTP, HTTP, FTP,
Frame Relay,
• Monitor mode
EDSS-1, Q.SIG, 1TR6,
TN1R6®, VN4, X.25, X.31,
DASS-2, DPNSS, CorNet®-N,
-NX, -NQ, -T,
• Other protocols available V.5.1, V.5.2, NI1, DMS100, 5ESS
Operating modes available
• Basic Rate Access
BRI TE-S, BRI MON-S,
BRI NT-S, BRI NT-U,
BRI MON-U (D2022 option),
BRI LT-U (LTU-2K option),
BRI S/T-Bus wiring test
(WT2000 option)
• Primary Rate Access
PRI TE-E1, PRI MON-E1,
PRI MON-E1 PMP,
PRI NT-E1,
• POTS/Analog
TE (AB2000N option),
MON (AB2000N option)
• V/X
DTE, DCE (VX2000 and VX21-
2500 option when required)
• Pattern generation
Single, n x 64Kbit timeslot
Smart Status™
• G.826/M.2100
(only PRI)
ES, SES, BBER, UAS
• ISDN line
Layers 1, 2, 3 and B ch status
• V/X interface
Control leads, test running, loop,
clock frequency, clock phasing
• 2Mbit
FAS, NFAS, MFAS, NMFAS,
alarms, errors, sync, CAS
channel status,
• Frame Relay (FR2K)
DLCI, LMI, and quality test
Background monitor
• Modes
High impedance and during
simulation
• Protocol analysis
on-board
• Programmable filters
Independent filters’ capturing
and displaying
• Statistics information
• Analysis of the results
stored on PC
PC108 for Windows™
Automatic access test
• Fully automated Access test
• Supplementary services automatic test
• Programmable test sequence
Bit error rate test
• G.821 statistics
ES, SES, US, DM, PASS/FAIL,
S-LOSS
• Pseudo-Random
User definable 211-1, 215-1, 223-1,
bit sequences User
All 0’s, All 1’s, 10101010,
16 bit octet, HDLC frame
• Error Injection
Manual, Automatic, Single
Manual sending
• Types
Bit, LFA, LOS, AIS, NMFAS, Sa,
RAI (A bit), E bit, CRC, CV,
control leads
Generate traffic
• Number of cycles
Up to 65535
• Number of parallel calls Up to 30 (PRI)
• Delay between calls
User selectable
X.25/X.31
• Modes
SVC, PVC
• Logical Types
DTE, DCE
• Tests
Traffic generator, Echo port
IP
• Modes
IP routed, IP over PPP
(Client and Server)
• IP address supported
Static, Dynamic
• Authentication
protocolPPP
PAP, CHAP (MD5)
• Protocols
IPv4, UDP, DNS, DHCP
ICMP, TFTP, HTTP, FTP
Frame relay (FR2K)
• Frame Relay Forum
FRF.1.1, FRF.3.1, FRF.12.1, FRF.14
• Type of traffic
IP, IP over PPP
• LMI
ITU-T Q.933, ANSI T1.617,
original LMI CISCO
• Logical Types
UNI, CPE, NNI
• QoS statistics
FECN, BECN, DE, NLPID, DLCI,
FRF.12
U-BUS loop qualification
• U-Bus voltage measurement
• Loop resistance measurement (Ω)
• Programmable simulation “NT-load” over U-Bus
• Activation/Deactivation time measurement (msec.)
History and predefined tests features
Saving and recalling of 10 different setup and results
for each kind of test
Connectors
• Primary Access interface
RJ45 120Ω, BNC 75Ω
• V.11/X.21
DB-15
• S/T Basic Access interface
RJ45 (ISO 8877)
• U Basic Access interface
RJ45 (ISO 8877)
• RS232
DB-9 (V.28 CCITT ISO4902)
• Handset
4 wires RJ9. Balanced, 600Ω
• Power in
External AC/DC adapter
• Power out
Mini-DIN 4 wires connector
Environmental characteristics
• Dimension
Weight, with battery
1 kg
Dimensions,
with holster (mm)
130 (w) x 260 (l) x 65 (d)
• Power
Battery Type
Rechargeable, Ni-MH
Battery life
3 hours @ 25°C, LCD back-lit off
External AC/DC adapter 115/230Vac ±10% @ 50/60 Hz
~~
~~
Temperature
• Storage/Transport
- 40°C to +70°C
• Operating, nominal
- 5°C to +45°C
• Operating, limits
-10°C to +55°C
• Humidity, non-condensing
93% RH @ 40°C
70% RH @ 55°C
• User's Safety Aspects
EN 61010-1,EN 60950,
EN 41003
• EMC Aspects
EN 55022, EN55024,
EN 61000-3-2 / -3-3
• CE Marking
Class B (residential devices)
Miscellaneous
• LCD display
240x200 Graphic display
wide bright an back-lit
• Internal microphone & loudspeaker
• Upgradable firmware
• MultiMediaCard™
memory extension
MMC2000 Option
Options
• INET2500
HTTP, FTP Internet download
• VX21-2500
X.21 / V.11 interface
• WT2000
S0/T0 wiring test
• AB2000N
Analog (POTS) line adapter
• LT-U2K
BRI LT-U simulation
• D2022-Q
BRI U (2B1Q) interface monitor
• D2022-T
BRI U (4B3T) interface monitor
• MMC2000
MMC Memory extention
• VX2000
DTE/DCE Datacom tester
• FR2K
Frame Relay test suite
• PC108XP EXPERT
More performing version for
license
protocol analysis and remote
management
• KCX21-DXE2500
X21/VII DTE/DCE CABLE KIT
• KCX2K-DTE
Cable Kit for VX2000
DTE simulation mode
• KCX2K-DCE
Cable Kit for VX2000
DCE simulation mode
<–
<–
Technical Specifications
Code 071072016GB Rev. 0 (10/07)