Power Dynamics PDX100 Instruction Manual

Ref. nr.: 172.719 INSTRUCTION MANUAL GEBRUIKSAANWIJZING GEBRAUCHSANLEITUNG

(OR BACK) THERE ARE NO SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lighting flash with arrowhead symbol,within an equilateral triangle,is intended to alert the user to the presence of uninsulated ”dangerous voltage” within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (serviving) instructions in the literature accompanying the appliance. WARNING: 1. Placing a disc with excessive downward force may damage the loader,invalidating the warranty. 2. To reduce the risk of fire or electrical shock,do not expose this appliance to rain or moisture.Electrical equipment should NEVER be kept or stored in damp Environments. DANGER: Invisible laser radiation when open and interlock failed or defeated void direct exposure to beam. CAUTION: This product utilizes a laser. Use of controls or adjustments other than those specified here in may result in hazardous radiation exposure. CAUTIONS REGARDING HANDLING Location Install the player in a well-ventilated location where it will not be exposed to high temperatures or humidity. Do not install the player in a location which is exposed to direct sunlight, or near stoves or radiators. Excessive heat can adversely affect the cabinet and internal components. Installation of the player in a damp or dusty environment may aiso result in a malfunction and can be hazardous. Avoid installation near cookers etc., where the player may be exposed to oily smoke, steam or heat. Installation Guidelines - Placing and using the compact disc player for long periods on heat-generating sources such as amplifiers or near spotlights, etc. will affect product performance. Avoid placing the player on heatgenerating sources. - Install this compact disc player as far as possible away from tuners and TV sets. A compact disc player installed in close proximity to such equipment may cause noise or degradation of the picture. - Noise may be noticeable when an indoor antenna is used. In such cases, make use of an outdoor antenna or turn off power to the compact disc player. - When the unit is used in a loud-sound environment, e.g., near a speaker, sound skip may occur. Install the unit away from the speaker or reduce the listening volume. - Place this unit on a level surface and a stable platform. - Be sure the player, including its audio and power supply cords, does not touch vibrating materials. Any cause of vibration other than the insulators may cause the disc to skip. Take special care when using the player while it is installed in a carrying case. When this unit is brought into a warm room from previously cold surroundings or when the room temperature rises sharply, condensation may form inside the unit and impair its performance. In such cases, allow the unit to stand for about an hour or raise the room temperature gradually. About discs created on computers Depending on the application settings and the computer’s environmental settings, it may not be possible to play certain discs. Record the disc in a format supported on this unit. For details, contact your application’s retailer. If the recording quality is poor due to the disc’s properties, scratches or dirt on the disc or dirt on the recording lens, it may not be possible to play the disc. Creating backup discs When CD-R/-RW discs are paused or left in the pause mode at cue points for long periods of time, it may become difficult to play the disc at that point, due to the properties of the disc. Also, when a specific point is looped repeatedly an extremely large number of times, it may become difficult to play that point. When playing valuable discs, we recommend making backup discs.

hazardous radiation exposure. Cd Player Function 1. Power switch-Turn the machine on and off. (Turn it on before amplifier) 2. Power plug connector- Plug the supplied power cord in here 3. Audio OUT connectors- Connect your CD player to your mixer from this line level output. 4. Fader Start- The DJ mixer can be used to control the CD player for fader start; use accessory cord. 5. CD Drawer- Place your CD in here. Use commercially CDs or burning CDs at the minimum speed possible

Press to load or eject disk. Each press will open or close the disk tray. NOTE: Disc holder will not open unless stop or pause button has been pushed first. 7. SD CARD SLOT 8. USB PORT Support USB playing 9. CD/USB/SD BUTTON By pressing this button repeatedly, you can select the playback sourceCDdrive/USB interface/SD card reader 10. Rotary dial As track selection function, choosing one scale clockwise will play the next track while selecting one scale counterclockwise will play the last track. It will affect only by pressing the encoder within 3 seconds otherwise the previous operation will be cancelled. 11. FOLDER BUTTON Allows you to navigate through folders similarly in either USB or CD mode. The LED lights will be on 12. PLAY / PAUSE BUTTON Each time you press the PLAY/PAUSE button, the operation changes from play to pause or from pause to play. When paused, pressing play will only set a new cue point if the jogwheel has been moved. 13. CUE BUTTON Pressing the CUE button during play provides a return to the position at which play was started and will pause the track. Holding down CUE will start playback from this point and releasing CUE will cause it to return to that point. So if the track is paused you can use the JOGWHEEL to locate a new cue point. 14. JOG WHEEL The jog wheel allows you to create scratch effects, to fast-forward or rewind within a track and to mokify the playback speed. If you have already pressed the VINYL(16) button (button is lit up in blue), you can create scratch effects in pause and playback mode by moving the jog wheel forwards and backwards. Turn the jog wheel clockwise to fast-forward within the track. Turn the jog wheel anti-clockwise to rewind within the track. The faster you turn the jog wheel, the faster the track will skip forwards/backwards. If the MINYL button is not activated (button is not lit up), you can use the jog wheel in pause mode to fast-forward or rewind the track. In playback mode you can modify the playback speed. Rotate the jog wheel clockwise to increase the speed. Rotate the jog wheel anti-clockwise to decrease the speed. 15. DISPLAY LCD Display lndicate the Track/Numbers/Time/Remain/Pitch/Continue/Single. 16. VINYL Button Press this button in order to activate the scratch function of the jogwheel(14). The button is lit up in blue. 17. BRAKE In play mode, push the brake button at first, starts the track at a speed that is slower than normal play back. When you stop the track, the track slows down before playback is stopped completely. 18. REVERSE Push the reverse button to play your track in reverse, push the reverse button again to cancel this feature. 19. REPEAT BUTTON Use this button to repeat one track or all the track of the CD. 20. LOOP IN BUTTON You may set the beginning point of the loop system and indicate on the display. 21. LOOP OUT BUTTON When you press this button, you set the end point of the seamless loop and you start the loop. To finish the loop, press again this button. 22. RELOOP BUTTON This button is used to start the last saved loop. To finish the loop, press the re-loop button again. 23. SINGLE / CONT BUTTON Press this button to switch between the SINGLE and CONTINUOUS play mode. The selected mode is indicated on the LCD (15). In SINGLE mode, after each track, the unit stops the reading. In CONTINUOUS mode, the unit reads all tracks and stops. 24. TIME BUTTON Use this knob to choose the time mode: elapsed time, remaining time or total remaining time. With MP3 files the total remaining time of the CD is not displayed. 25. SEARCH BUTTON You may forward and backward to navigation through one track. Constantly pressing will start up double quick

Use this fader to increase or decrease the speed of the track. The percentage is displayed. First of all push button 28. 27. PITCH BEND –/+ BUTTON The pitch will drop while the - button is pressed and return to the original pitch when it released. The pitch will automatically rise when the + button is pressed and return to the original pitch when it is released. 28. PITCH BUTTON If you push this button, the adjustement of the pitch potentiometer is available. 29. LED PITCH It is used to indicate different pitch ranges 30. TAP BUTTON Press this button in the rhythm of the music. The display (15) shows the beats per minute (BPM) 31. PROG BUTTON In STOP mode, you can program several tracks ( 20 tracks max ) : Press the STOP button to enter in the stop mode Press the PROG button to enter in the program mode Use the skip track buttons to choose the track you want to listen then press the PROG button to enter your choice. Use one more time the skip track buttons to choose the track you want to listen then press the PROG button to enter your choice Repeat the operation to select all the track you want to listen Press the PLAY/PAUSE button to start the playback. USABLE DISCS AND USB DEVICES PLAYABLE MUSIC FILE FORMATS This unit supports USB mass storage class USB devices (external hard disks, portable flash memory devices, digital audio players, etc.). When there are many folders or files, some time may be required for loading. Folders and files exceeding the limits cannot be displayed. USB devices that cannot be used • Optical disk type devices such as external DVD / CD drives, etc., are not supported. • USB hubs cannot be used. Cautions on using USB devices • Some USB devices may not operate properly. Please note that distributor will accept no responsibility whatsoever for loss of data recorded on USB devices. • It may happen that, when a current above the allowable level is detected in this unit’s USB port, the [USB STOP] indicator flashes, the power supply to the USB device is cut off and communications with the USB device are interrupted. To restore normal operation, disconnect the USB device from this unit. Avoid reusing USB devices for which an excess current has been detected. If normal operation is not restored (if communications cannot be established) after the above procedure is performed, try turning off this unit’s power then turning it back on. • If multiple partitions are set for the USB device, the device may not be recognized. • USB devices equipped with flash card readers may not operate. • Depending on the USB device you are using, the desired performance may not be achieved. About USB devices This unit supports music files in the formats shown here. 32 kHz, 44.1 kHz, CBR, VBR 48 kHz 32 kbps to MP3 .mp3 MPEG-1 16 bit 320 kbps Type File extension Compatible fAbout MP3 files MP3 files can have a constant bit rate (CBR) or a variable bit rate (VBR). Both types of files can be played on the CD players, but the search and super fast search functions are slower with VBR files. If your priority is operability, we recommend recording MP3 files in CBR. SPECIFICATIONS Anti-Shock buffer memory: 20 seconds Range of adjustments: +/-4%, 8% ,16% Power supply: AC 100-240V~50/60Hz Power consumption: 20W max. Admissible media: CD, CD-R, MP3-CD, USB, SD, SDHC Output voltage: 1 VRMS/10 kOhm Frequency response: 20-20000 Hz Dimensions: L290XW226XH300mm Weight.: 2 Kgs