Panasonic DMREZ485V - DVD RECORDER - MULTI LANGUAGE Quick Setup Manual

RQCA1736 F0108SN0 If you have any questions contact Connection Quick Setup Guide Connecting to a TV  Connecting to a TV and a Cable Box  Connecting to a TV and a Satellite Receiver RF IN RF OUT RF IN AC IN VHF/ UHF COMPONENT VIDEO OUT DVD/VHS COMMON OUT DVD PRIORITY OUT IN1  AUDIO IN R L VIDEO IN AUDIO OUT R L VIDEO OUT      RF IN RF OUT AV OUT AC IN RF IN AUDIO IN R L VIDEO IN VHF/ UHF COMPONENT VIDEO OUT DVD/VHS COMMON OUT DVD PRIORITY OUT IN1     RF IN RF OUT AV OUT RF IN RF OUT AC IN COMPONENT VIDEO OUT DVD/VHS COMMON OUT DVD PRIORITY OUT IN1     SATELLITE IN VHF/ UHF  RF IN RF OUT AUDIO IN R L VIDEO IN AUDIO OUT R L VIDEO OUT AV OUT DVD Connection Guides (This is in English only) http://www.panasonic.com/consumer_electronics/dvd_recorder/dvd_connection.asp 1-800-211-7 PANA 262 DMR-EZ485V • Before making any connections, turn off all equipment. • For details on the benefi ts and limitations of different types of connections, please refer to pages 8 to 11, 70 to 72 in the Operating Instructions. Cable box TV Satellite antenna Cable from the wall (Included) (Included) This unit (Included) Satellite receiver TV (Included) This unit (Included) TV Cable from the wall/ antenna signal (Included) This unit (Included) (Included) (Included) Connection (with Audio/Video cable) Connect in numbered order to . After this connection, set the RF output channel “OFF”. Step 4 (“Initial Settings”) on the opposite side of this page. Connection (without Audio/Video cable) You do not need to connect “ ”. After this connection, set the RF output channel “CH3” or “CH4”. Step 4 (“Initial Settings”) on the opposite side of this page. EZ485V.indd 1-2 EZ485V.indd 1-2 2008/01/10 9:22:21 2008/01/10 9:22:21

1 Turn the TV on. 2 Switch input to “AV input”etc. Using your TV’s remote control • To return to the previous screen RETURN 3 Turn this unit on. 5 Select the language. 6 Select the type of TV you are using. • If you make a mistake, press [RETURN]. 7 Set Quick Start to “On” or “Off”. 10 Complete the settings. • If the clock setting screen appears. POWER DVD/VHS 4 Select an RF output channel number. CH Select, Set OK Select, Set OK Select, Set OK OK Select, Set Next, OK POWER POWER SLOW/SEARCH S C H E D U L E F U N C T I O N S TV/VIDEO PAUSE STOP 3 2 1 6 5 4 9 8 7 0 REC MODE RETURN SUB MENU CM SKIP D I R E C T N A V I G A T O R DISPLAY AUDIO REC DRIVE SELECT F Rec STATUS CHAPTER CREATE INPUT SELECT DELETE FAVORITE CH CH PLAY VOL VCR/TV SKIP/INDEX REW FF TRACKING/V-LOCK DVD/VHS RESET TIME SLIP/ JET REW S C H E D U L E F U N C T I O N S PAUSE STOP 3 2 1 6 5 4 9 8 7 0 D I R E C T N A V A I G A T A O R DELETE CH CH PLAY VOL POWER DVD/VHS CH RETURN OK A B 8 Select whether to receive TV signal from the unit’s RF IN terminal or not. Select, Set OK Select Language Seleccione el idioma Sélection de langue Press OK Pulse OK Appuyer sur OK English Français Español Set Clock Automatically Clock Setting completed successfully. 4/4/2008 12:15 AM DST............. On Time Zone.... EST OK Set Clock Manually / : / SAT AM Month Day Year Hour Minute 1 1 12 00 2000 DST Time Zone Off EST OK Select TV type and press OK. (Please refer to Operation Instruction for details) 4:3 TV 16:9 Widescreen TV OK Aspect Ratio Selection The unit can be turned on faster, in about 1 second. Please note that Quick Start mode slightly increases power consumption when the unit is off. (See Operation Instructions for details) Turn Quick Start on ? On Off OK Quick Start Setting Does this unit get its TV signal via RF IN? Example:Antenna,Cable TV or Cable Box connected to the unit’s RF IN. Yes No OK Automatic Clock and Channel Settings 9 Select “Antenna” or “Cable”. Select, Set OK Please select the wire connected to RF IN. Antenna Cable OK Automatic Clock and Channel Settings Connecting with an HDMI (High Defi nition Multimedia Interface) Cable • If you select “No”‚ you can proceed to “Set Clock Manually” (step 10‚ below). • If the correct time is displayed • Please refer to “Basic Operations” (pages 15 to 22) in the operating instructions. Press [OK] to start automatic clock and channel setting. What is VIERA Link “HDAVI Control”? VIERA Link TM is a new name for EZ Sync TM. VIERA Link “HDAVI Control” is a convenient function that offers linked operations of this unit, and a Panasonic TV (VIERA) or receiver under “HDAVI Control”. You can use this function by connecting the equipment with the HDMI cable. For details on the benefi ts of “HDAVI Control”, please refer to pages 40 to 41 in the Operating Instructions. VIERA Link TM “HDAVI Control TM” RF IN HDMI IN HDMI AV OUT VHF/ UHF COMPONENT VIDEO OUT DVD/VHS COMMON OUT DVD PRIORITY OUT IN1   RF IN RF OUT AV OUT  AC IN  AUDIO IN R L INPUT 1 VIDEO IN  Set “HDMI Priority” and “HDMI Audio Output” to “On” (The default setting is “On”.) ( page 65, 66 in the operating instructions). For details on the benefi ts and limitations of different types of connections, please refer to pages 8 to 11, 70 to 72 in the Operating Instructions. Connection (with Audio/ Video cable) Select “OFF”. Connection (without HDMI cable or Audio/Video cable) Select “CH3” or “CH4”. If the selection is appropriate, then the step 5 screen will appear. • When this unit is connected to a Panasonic TV (VIERA) supporting HDAVI Control 3 and initially set up, it automatically acquires the TV setting information. For details, please refer to page 14 in the Operating Instructions. When connected to an HDMI compatible unit, an uncompressed digital audio and video signal is transmitted, enabling you to enjoy high quality, digital video and audio with just one cable. When connecting to an HDMI- compatible HDTV (High Defi nition Television), the output can be switched to 1080p, 1080i or 720p HD video. • Please use High Speed HDMI Cables that have the HDMI logo (as shown on the cover of the operating instructions). It is recommended that you use Panasonic’s HDMI cable. • We recommend connecting to the TV with the DVD/VHS COMMON OUT terminals as well. This unit Cable from the wall/ antenna signal (Included) (Included) TV (Included) (Included) EZ485V.indd 3-4 EZ485V.indd 3-4 2008/01/10 9:22:21 2008/01/10 9:22:21